[Sun Feb  5 10:05:03 2012] Detection parameters:
  Position = (401.8, 340.3) = 0 42 13.07 41 18 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1736.3 +/- 51.5
  Background counts = 47.9
  Rate = 0.2 +/- 0.006

[Sun Feb  5 10:05:06 2012] Off-axis axis estimate = 8.09'
[Sun Feb  5 10:07:29 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:07:29 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sun Feb  5 10:07:29 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.065
[Sun Feb  5 10:07:29 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 10.47"
[Sun Feb  5 14:54:49 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src24.ximg exists
[Sun Feb  5 14:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src24.csv
[Sun Feb  5 14:54:49 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Feb  5 14:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src24.csv
[Sun Feb  5 14:54:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 14:54:51 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Feb  5 14:54:51 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Feb  5 14:54:51 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Feb  5 21:08:04 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 14.261263 pixels away
[Sun Feb  5 21:08:05 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:05 2012] Assessing source extent using major
[Sun Feb  5 21:08:05 2012] Source does appear to be extended
[Sun Feb  5 21:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:51 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 21:08:51 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sun Feb  5 21:08:51 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.065
[Sun Feb  5 21:08:51 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.47"
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src21.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src21.csv
[Mon Feb  6 00:25:32 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Feb  6 00:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src21.csv
[Mon Feb  6 00:25:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Feb  6 00:25:33 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Feb  6 05:24:16 2012] Spatial fit model total counts = 1927.910000, observed total counts = 1930.000000
[Mon Feb  6 05:24:16 2012] Offset between fit and detection position for source 24 = 0.300464 pixels
[Mon Feb  6 05:24:16 2012] 1919.457000 total counts/ 822.517000 bgd. counts: snr = 38.248150
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.300464 pixels
  Position = (401.6, 340.5) = 0 42 13.15 41 18 36.2
  Extent = 5.3 (5.0-5.6)", rotation angle = 0
  Source counts = 1096.9 +/- 43.8
  Background counts = 822.5
  Rate = 0.08 +/- 0.003
[Mon Feb  6 05:24:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:16 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:16 2012] Source does appear to be extended
[Mon Feb  6 05:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:24:55 2012] Counts = 1096.940000, rescaling region sizes by 2.000000
[Mon Feb  6 05:24:55 2012] XMMSAS src. selection expression = ellipse(34892.891000, 29572.845800, 630.531618, 630.531618, 0.000000, X, Y)
[Mon Feb  6 05:24:55 2012] Writing source region out to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src24_src.reg
[Mon Feb  6 05:24:55 2012] Extracting stamp from image fullrun_pn_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (365, 304) - (438, 377)
[Mon Feb  6 05:24:55 2012] XMMSAS bgd. selection expression = annulus(34892.891000, 29572.845800, 2101.772060, 4203.544121, X, Y) && !ellipse(32686.021400, 25947.189600, 431.423212, 431.423212, 0.000000, X, Y) && !ellipse(34360.005200, 31879.498200, 458.682413, 458.682413, 0.000000, X, Y) && !ellipse(30809.208000, 30815.189000, 415.660012, 415.660012, 0.000000, X, Y) && !ellipse(31971.226380, 30338.212200, 463.756013, 463.756013, 0.000000, X, Y) && !ellipse(36109.283200, 29157.702600, 408.657612, 408.657612, 0.000000, X, Y) && !ellipse(35129.785919, 28843.048248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35523.604000, 28191.250000, 1671.088048, 1671.088048, 0.000000, X, Y) && !ellipse(27474.268000, 26908.592800, 4804.560138, 4804.560138, 0.000000, X, Y) && !ellipse(33035.281097, 26377.742035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30107.870000, 26684.158000, 1321.704038, 961.952028, 28.890000, X, Y) && !ellipse(30841.461900, 26879.778200, 444.144813, 444.144813, 0.000000, X, Y) && !ellipse(34429.609558, 28837.021332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35068.017175, 28025.027831, 1287.440037, 1287.440037, 0.000000, X, Y) && !ellipse(30295.518000, 25295.406000, 1287.296037, 1287.296037, 0.000000, X, Y)
[Mon Feb  6 05:24:55 2012] Writing fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src24.gif
[Mon Feb  6 05:39:02 2012] Mean detx,y = (4027.94, -6776.71) 
[Mon Feb  6 05:39:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 05:39:27 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 05:39:27 2012] Setting source spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Feb  6 05:39:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue Feb  7 10:42:25 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:25 2012] Error reading totcts from fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Feb  7 10:42:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:27 2012] Using photon index=1.80, rate=0.0761, arf fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src24.arf
[Tue Feb  7 10:42:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:27 2012] Updating source flux to 2.8e-13