[Sun Feb  5 10:05:06 2012] Detection parameters:
  Position = (265.7, 236.9) = 0 43 5.60 41 11 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.7 +/- 15.7
  Background counts = 58.9
  Rate = 0.009 +/- 0.002

[Sun Feb  5 10:05:06 2012] Off-axis axis estimate = 5.05'
[Sun Feb  5 10:07:29 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:07:29 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Sun Feb  5 10:07:29 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Sun Feb  5 10:07:29 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 8.95"
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src98.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src98.csv
[Sun Feb  5 14:54:50 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src98_1.ximg exists
[Sun Feb  5 14:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src98.csv
[Sun Feb  5 14:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 14:54:52 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sun Feb  5 14:54:52 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sun Feb  5 14:54:52 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Sun Feb  5 21:08:05 2012] Spatial fit model total counts = 713.481000, observed total counts = 714.000000
[Sun Feb  5 21:08:05 2012] Offset between fit and detection position for source 100 = 4.381611 pixels
[Sun Feb  5 21:08:05 2012] 662.424000 total counts/ 404.092000 bgd. counts: snr = 12.851034
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 4.381611 pixels
  Position = (268.0, 240.7) = 0 43 4.74 41 11 22.5
  Extent = 15.2 (11.3-17.9)", rotation angle = 0
  Source counts = 258.3 +/- 25.7
  Background counts = 404.1
  Rate = 0.02 +/- 0.002
[Sun Feb  5 21:08:05 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:05 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:05 2012] Source does appear to be extended
[Sun Feb  5 21:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 21:08:51 2012] Initial guess for spatial extent in simple fitting = 15.16"
[Sun Feb  5 21:08:51 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.007
[Sun Feb  5 21:08:51 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 15.16"
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src82.ximg exists
[Mon Feb  6 00:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src82.csv
[Mon Feb  6 00:25:33 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src82_1.ximg exists
[Mon Feb  6 00:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src82.csv
[Mon Feb  6 00:25:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 00:25:34 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Mon Feb  6 00:25:34 2012] fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Mon Feb  6 00:25:34 2012] Fit fullrun_pn_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Mon Feb  6 05:24:16 2012] Warning, spatial fit 82 centroid is now closest to src. 73
[Mon Feb  6 05:24:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:16 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:16 2012] Source does appear to be extended
[Mon Feb  6 05:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:24:58 2012] XMMSAS src. selection expression = ellipse(23263.330000, 20891.240000, 909.750026, 909.750026, 0.000000, X, Y)
[Mon Feb  6 05:24:58 2012] Writing source region out to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src100_src.reg
[Mon Feb  6 05:24:58 2012] Extracting stamp from image fullrun_pn_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (216, 188) - (320, 293)
[Mon Feb  6 05:24:58 2012] XMMSAS bgd. selection expression = annulus(23263.330000, 20891.240000, 1516.250044, 3032.500087, X, Y) && !ellipse(25877.316046, 24501.440000, 1390.411240, 1390.411240, 0.000000, X, Y) && !ellipse(27474.268000, 26908.592800, 4804.560138, 4804.560138, 0.000000, X, Y) && !ellipse(22006.154800, 25036.500000, 1208.552035, 575.050417, 46.417303, X, Y) && !ellipse(22401.017780, 22595.082800, 348.064010, 348.064010, 0.000000, X, Y) && !ellipse(24798.603600, 20541.154000, 439.826413, 439.826413, 0.000000, X, Y) && !ellipse(23608.652679, 19541.267273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.326000, 23927.286000, 1185.392034, 1185.392034, 0.000000, X, Y) && !ellipse(23995.829400, 24114.040800, 1209.776035, 1209.776035, 0.000000, X, Y) && !ellipse(23929.686400, 21837.388200, 1432.712041, 415.236012, 127.216000, X, Y) && !ellipse(21538.025864, 18655.536224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20686.214000, 17354.250000, 2040.272059, 677.084019, 126.698000, X, Y)
[Mon Feb  6 05:24:58 2012] Writing fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src100.gif
[Mon Feb  6 06:24:29 2012] Mean detx,y = (-175.31, 7082.81) 
[Mon Feb  6 06:24:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 06:24:52 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 06:24:52 2012] Setting source spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Mon Feb  6 06:24:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Tue Feb  7 10:42:26 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:26 2012] Error reading totcts from fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Tue Feb  7 10:42:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:28 2012] Using photon index=1.80, rate=0.0179, arf fullrun_pn_xmm0600660601_pi300-10000_pass1_cl_src100.arf
[Tue Feb  7 10:42:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:28 2012] Updating source flux to 5.9e-14