[Sun Feb  5 10:05:14 2012] Detection parameters:
  Position = (408.3, 260.5) = 0 42 10.63 41 12 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.9 +/- 8.7
  Background counts = 12.6
  Rate = 0.003 +/- 0.0008

[Sun Feb  5 10:05:14 2012] Off-axis axis estimate = 8.43'
[Sun Feb  5 18:05:22 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 18:05:22 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Feb  5 18:05:22 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.864
[Sun Feb  5 18:05:22 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 10.64"
[Sun Feb  5 21:07:41 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src83.ximg exists
[Sun Feb  5 21:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src83.csv
[Sun Feb  5 21:07:41 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src83_1.ximg exists
[Sun Feb  5 21:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src83.csv
[Sun Feb  5 21:07:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 21:07:42 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Sun Feb  5 21:07:42 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Sun Feb  5 21:07:42 2012] Fit fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Sun Feb  5 21:08:29 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 12.053878 pixels away
[Sun Feb  5 21:08:29 2012] Spatial fit model total counts = 154.000000, observed total counts = 154.000000
[Sun Feb  5 21:08:29 2012] Offset between fit and detection position for source 85 = 0.200190 pixels
[Sun Feb  5 21:08:29 2012] 154.319800 total counts/ 132.026000 bgd. counts: snr = 1.940235
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.200190 pixels
  Position = (408.1, 260.4) = 0 42 10.71 41 12 48.0
  Extent = 4.3 (2.7-7.6)", rotation angle = 0
  Source counts = 22.3 +/- 12.4
  Background counts = 132.0
  Rate = 0.001 +/- 0.0007
[Sun Feb  5 21:08:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:30 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:30 2012] Source does appear to be extended
[Sun Feb  5 21:08:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:30 2012] Deleting source due to low Poisson probability 0.8