[Sun Feb  5 10:05:13 2012] Detection parameters:
  Position = (371.2, 304.4) = 0 42 24.92 41 15 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.2 +/- 13.6
  Background counts = 23.2
  Rate = 0.004 +/- 0.001

[Sun Feb  5 10:05:14 2012] Off-axis axis estimate = 5.29'
[Sun Feb  5 18:05:22 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 18:05:22 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Sun Feb  5 18:05:22 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.748
[Sun Feb  5 18:05:22 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 9.07"
[Sun Feb  5 21:07:41 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src73.ximg exists
[Sun Feb  5 21:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src73.csv
[Sun Feb  5 21:07:41 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src73_1.ximg exists
[Sun Feb  5 21:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src73.csv
[Sun Feb  5 21:07:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 21:07:42 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sun Feb  5 21:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src73.csv
[Sun Feb  5 21:07:42 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sun Feb  5 21:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src73.csv
[Sun Feb  5 21:07:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 21:08:29 2012] Warning, spatial fit 73 centroid is now closest to src. 3
[Sun Feb  5 21:08:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:30 2012] Assessing source extent using major
[Sun Feb  5 21:08:30 2012] Source does appear to be extended
[Sun Feb  5 21:08:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:30 2012] Source is confused with source 3
[Mon Feb  6 02:40:19 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Mon Feb  6 02:40:19 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Mon Feb  6 02:40:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.748
[Mon Feb  6 02:40:19 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 9.07"
[Mon Feb  6 05:24:02 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_src69.ximg exists
[Mon Feb  6 05:24:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_src69.csv
[Mon Feb  6 05:24:02 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_src69_1.ximg exists
[Mon Feb  6 05:24:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_src69.csv
[Mon Feb  6 05:24:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 05:24:03 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Mon Feb  6 05:24:03 2012] fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Mon Feb  6 05:24:03 2012] Fit fullrun_mos2_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Mon Feb  6 05:24:34 2012] Warning, spatial fit 69 centroid is now closest to src. 3
[Mon Feb  6 05:24:34 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:34 2012] Assessing source extent using major
[Mon Feb  6 05:24:34 2012] Source does appear to be extended
[Mon Feb  6 05:24:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb  7 08:35:58 2012] XMMSAS src. selection expression = ellipse(32243.984131, 26433.582611, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb  7 08:35:58 2012] Writing source region out to fullrun_mos2_xmm0600660601_pi300-10000_pass1_cl_src74_src.reg
[Tue Feb  7 08:35:58 2012] Extracting stamp from image fullrun_mos2_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (334, 267) - (409, 342)
[Tue Feb  7 08:35:58 2012] XMMSAS bgd. selection expression = annulus(32243.984131, 26433.582611, 1087.500000, 2175.000000, X, Y) && !ellipse(32678.436000, 25951.208000, 356.509610, 356.509610, 0.000000, X, Y) && !ellipse(30843.426700, 26876.603400, 381.265611, 381.265611, 0.000000, X, Y) && !ellipse(33661.215200, 24087.737000, 393.904811, 393.904811, 0.000000, X, Y) && !ellipse(33024.254761, 26382.096283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.366000, 26632.976000, 1322.272038, 1322.272038, 0.000000, X, Y) && !ellipse(32659.178800, 24193.970000, 189.352805, 189.352805, 0.000000, X, Y) && !ellipse(34332.679749, 28071.589661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.136200, 28813.365021, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb  7 08:35:58 2012] Writing fullrun_mos2_xmm0600660601_pi300-10000_pass1_cl_src74.gif
[Tue Feb  7 08:51:10 2012] Mean detx,y = (-3997.04, 2501.92) 
[Tue Feb  7 08:51:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb  7 08:51:16 2012] Binned source spectrum to 10 counts/bin
[Tue Feb  7 08:51:16 2012] Setting source spectrum file to fullrun_mos2_xmm0600660601_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Tue Feb  7 08:51:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660601_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Tue Feb  7 10:41:38 2012] Not generating rmf since there are only 53 counts
[Tue Feb  7 10:41:38 2012] rmf not generated due to insufficient counts
[Tue Feb  7 10:42:32 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:32 2012] Error reading totcts from fullrun_mos2_xmm0600660601_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Tue Feb  7 10:42:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:33 2012] Using photon index=1.80, rate=0.00397, arf fullrun_mos2_xmm0600660601_pi300-10000_pass1_cl_src74.arf
[Tue Feb  7 10:42:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:33 2012] Updating source flux to 5.2e-14
[Tue Feb  7 10:45:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting