[Sun Feb  5 10:05:10 2012] Detection parameters:
  Position = (269.1, 304.8) = 0 43 4.30 41 16 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.9 +/- 13.0
  Background counts = 24.2
  Rate = 0.005 +/- 0.0009

[Sun Feb  5 10:05:10 2012] Off-axis axis estimate = 2.17'
[Sun Feb  5 14:54:52 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 14:54:52 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Sun Feb  5 14:54:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sun Feb  5 14:54:52 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 7.52"
[Sun Feb  5 18:05:20 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src69.ximg exists
[Sun Feb  5 18:05:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src69.csv
[Sun Feb  5 18:05:20 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun Feb  5 18:05:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src69.csv
[Sun Feb  5 18:05:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 18:05:22 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun Feb  5 18:05:22 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun Feb  5 18:05:22 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sun Feb  5 21:08:19 2012] Warning, spatial fit 69 centroid is now closest to src. 28
[Sun Feb  5 21:08:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:19 2012] Assessing source extent using major
[Sun Feb  5 21:08:19 2012] Source does appear to be extended
[Sun Feb  5 21:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:19 2012] Source is confused with source 28
[Mon Feb  6 00:25:34 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Mon Feb  6 00:25:34 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Mon Feb  6 00:25:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Mon Feb  6 00:25:34 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 7.52"
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src65.ximg exists
[Mon Feb  6 02:40:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src65.csv
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src65_1.ximg exists
[Mon Feb  6 02:40:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src65.csv
[Mon Feb  6 02:40:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 02:40:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Mon Feb  6 02:40:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src65.csv
[Mon Feb  6 02:40:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Mon Feb  6 02:40:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src65.csv
[Mon Feb  6 02:40:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 05:24:26 2012] Spatial fit model total counts = 61.790900, observed total counts = 572.000000
[Mon Feb  6 05:24:26 2012] Poor agreement between spatial fit and data for source 77
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb  6 05:24:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:26 2012] Assessing source extent using major
[Mon Feb  6 05:24:26 2012] Source does appear to be extended
[Mon Feb  6 05:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb  7 06:12:56 2012] XMMSAS src. selection expression = ellipse(23365.754669, 26466.980225, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb  7 06:12:56 2012] Writing source region out to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src77_src.reg
[Tue Feb  7 06:12:56 2012] Extracting stamp from image fullrun_mos1_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (232, 267) - (307, 342)
[Tue Feb  7 06:12:56 2012] XMMSAS bgd. selection expression = annulus(23365.754669, 26466.980225, 1087.500000, 2175.000000, X, Y) && !ellipse(25873.046580, 24500.576600, 443.329613, 443.329613, 0.000000, X, Y) && !ellipse(21938.367800, 25074.252200, 412.692012, 412.692012, 0.000000, X, Y) && !ellipse(25479.935800, 26511.280600, 358.072810, 358.072810, 0.000000, X, Y) && !ellipse(24362.138800, 26568.038200, 388.676011, 388.676011, 0.000000, X, Y) && !ellipse(26020.043213, 26049.798126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23460.837180, 28948.304000, 415.897612, 415.897612, 0.000000, X, Y) && !ellipse(23629.898380, 25742.356000, 434.844013, 354.000010, 67.604200, X, Y) && !ellipse(26054.348846, 27421.484497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.146000, 28278.884000, 1148.768033, 1148.768033, 0.000000, X, Y)
[Tue Feb  7 06:12:56 2012] Writing fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src77.gif
[Tue Feb  7 06:25:45 2012] Mean detx,y = (-2524.50, -3622.49) 
[Tue Feb  7 06:25:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb  7 06:25:51 2012] Binned source spectrum to 10 counts/bin
[Tue Feb  7 06:25:51 2012] Setting source spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Tue Feb  7 06:25:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Tue Feb  7 08:35:23 2012] Not generating rmf since there are only 70 counts
[Tue Feb  7 08:35:23 2012] rmf not generated due to insufficient counts
[Tue Feb  7 10:42:29 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:29 2012] Error reading totcts from fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Tue Feb  7 10:42:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:31 2012] Using photon index=1.80, rate=0.00515, arf fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src77.arf
[Tue Feb  7 10:42:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:31 2012] Updating source flux to 6.3e-14
[Tue Feb  7 10:42:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting