[Sun Feb  5 10:05:08 2012] Detection parameters:
  Position = (387.9, 252.9) = 0 42 18.49 41 12 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 459.7 +/- 29.8
  Background counts = 14.3
  Rate = 0.05 +/- 0.003

[Sun Feb  5 10:05:10 2012] Off-axis axis estimate = 7.28'
[Sun Feb  5 14:54:52 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 14:54:52 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Feb  5 14:54:52 2012] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.663
[Sun Feb  5 14:54:52 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.07"
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src19.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src19.csv
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src19.csv
[Sun Feb  5 18:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Feb  5 18:05:21 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Feb  5 21:08:19 2012] Spatial fit model total counts = 593.042000, observed total counts = 592.000000
[Sun Feb  5 21:08:19 2012] Offset between fit and detection position for source 39 = 1.701701 pixels
[Sun Feb  5 21:08:19 2012] 594.435000 total counts/ 180.012000 bgd. counts: snr = 30.888237
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.701701 pixels
  Position = (387.9, 254.6) = 0 42 18.52 41 12 22.8
  Extent = 8.7 (7.9-9.5)", rotation angle = 0
  Source counts = 414.4 +/- 24.4
  Background counts = 180.0
  Rate = 0.02 +/- 0.001
[Sun Feb  5 21:08:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:19 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:19 2012] Source does appear to be extended
[Sun Feb  5 21:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 00:25:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 00:25:34 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Mon Feb  6 00:25:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 13, frac = 0.521
[Mon Feb  6 00:25:34 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.69"
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src20.ximg exists
[Mon Feb  6 02:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src20.csv
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Feb  6 02:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src20.csv
[Mon Feb  6 02:40:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 02:40:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Feb  6 02:40:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Feb  6 02:40:19 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Feb  6 05:24:25 2012] Warning, spatial fit 20 centroid is now closest to src. 33
[Mon Feb  6 05:24:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:26 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:26 2012] Source does appear to be extended
[Mon Feb  6 05:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb  7 06:12:55 2012] XMMSAS src. selection expression = ellipse(33695.121200, 22102.777200, 521.415015, 521.415015, 0.000000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing source region out to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src39_src.reg
[Tue Feb  7 06:12:55 2012] Extracting stamp from image fullrun_mos1_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (358, 225) - (418, 285)
[Tue Feb  7 06:12:55 2012] XMMSAS bgd. selection expression = annulus(33695.121200, 22102.777200, 869.025025, 1738.050050, X, Y) && !ellipse(33670.865906, 24020.524719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.495600, 23651.673800, 295.448009, 295.448009, 0.000000, X, Y) && !ellipse(35250.577600, 20291.049600, 522.912015, 522.912015, 0.000000, X, Y) && !ellipse(34806.950000, 22762.792000, 1473.936042, 1473.936042, 0.000000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src39.gif
[Tue Feb  7 06:18:50 2012] Mean detx,y = (164.78, 7156.35) 
[Tue Feb  7 06:18:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb  7 06:19:00 2012] Binned source spectrum to 10 counts/bin
[Tue Feb  7 06:19:00 2012] Setting source spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Feb  7 06:19:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Tue Feb  7 10:42:28 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:28 2012] Error reading totcts from fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Feb  7 10:42:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:30 2012] Using photon index=1.80, rate=0.0244, arf fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src39.arf
[Tue Feb  7 10:42:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:30 2012] Updating source flux to 1.7e-12