[Sun Feb  5 10:05:08 2012] Detection parameters:
  Position = (320.9, 307.0) = 0 42 44.31 41 16 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1707.7 +/- 53.3
  Background counts = 33.2
  Rate = 0.1 +/- 0.003

[Sun Feb  5 10:05:10 2012] Off-axis axis estimate = 1.75'
[Sun Feb  5 14:54:52 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 14:54:52 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Feb  5 14:54:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Feb  5 14:54:52 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.30"
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src8.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src8.csv
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src8.csv
[Sun Feb  5 18:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Feb  5 18:05:21 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Feb  5 21:08:19 2012] Warning, spatial fit 8 centroid is now closest to src. 7
[Sun Feb  5 21:08:19 2012] Spatial fit model total counts = 4900.450000, observed total counts = 4897.000000
[Sun Feb  5 21:08:19 2012] Offset between fit and detection position for source 22 = 0.626547 pixels
[Sun Feb  5 21:08:19 2012] Warning, changing simple spatial fit ID from 8 to 16
[Sun Feb  5 21:08:19 2012] 4502.579000 total counts/ 3984.630000 bgd. counts: snr = 8.205272
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.626547 pixels
  Position = (320.9, 306.4) = 0 42 44.32 41 16 8.5
  Extent = 5.1 (4.6-5.9)", rotation angle = 0
  Source counts = 517.9 +/- 67.1
  Background counts = 3984.6
  Rate = 0.03 +/- 0.004
[Sun Feb  5 21:08:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:19 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:19 2012] Source does appear to be extended
[Sun Feb  5 21:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:19 2012] Source is confused with source 7
[Mon Feb  6 00:25:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 00:25:34 2012] Initial guess for spatial extent in simple fitting = 5.07"
[Mon Feb  6 00:25:34 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.081
[Mon Feb  6 00:25:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.07"
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src9.ximg exists
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Feb  6 02:40:17 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src9 appears to have run properly
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Feb  6 02:40:18 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Feb  6 05:24:25 2012] Warning, spatial fit 9 centroid is now closest to src. 7
[Mon Feb  6 05:24:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:26 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:26 2012] Source does appear to be extended
[Mon Feb  6 05:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb  7 06:12:55 2012] XMMSAS src. selection expression = ellipse(27870.660000, 26609.568000, 304.362609, 304.362609, 0.000000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing source region out to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src22_src.reg
[Tue Feb  7 06:12:55 2012] Extracting stamp from image fullrun_mos1_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (303, 289) - (338, 324)
[Tue Feb  7 06:12:55 2012] XMMSAS bgd. selection expression = annulus(27870.660000, 26609.568000, 507.271015, 1014.542029, X, Y) && !ellipse(29160.715600, 26515.406000, 436.658413, 419.483212, 22.675000, X, Y) && !ellipse(26942.268600, 25709.844000, 501.800814, 501.800814, 0.000000, X, Y) && !ellipse(27472.684000, 26789.117600, 811.632023, 811.632023, 0.000000, X, Y) && !ellipse(28235.556200, 26217.962580, 510.568015, 510.568015, 0.000000, X, Y) && !ellipse(26020.043213, 26049.798126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.688080, 26484.471558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27695.908325, 28220.502289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27159.562000, 25433.346000, 1119.576032, 1119.576032, 0.000000, X, Y) && !ellipse(26054.348846, 27421.484497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26950.344238, 27600.855621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.705719, 25114.240143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.679993, 24826.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26515.596466, 27615.675995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.146000, 28278.884000, 1148.768033, 1148.768033, 0.000000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src22.gif
[Tue Feb  7 06:16:15 2012] Mean detx,y = (319.42, -241.35) 
[Tue Feb  7 06:16:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb  7 06:16:21 2012] Binned source spectrum to 10 counts/bin
[Tue Feb  7 06:16:21 2012] Setting source spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Feb  7 06:16:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Feb  7 10:42:28 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:28 2012] Error reading totcts from fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Feb  7 10:42:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:30 2012] Using photon index=1.80, rate=0.0304, arf fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src22.arf
[Tue Feb  7 10:42:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:30 2012] Updating source flux to 3.7e-13
[Tue Feb  7 10:42:35 2012] Flag c found in src. 22 procflags, skipping spectral fitting