[Sun Feb  5 10:05:08 2012] Detection parameters:
  Position = (355.2, 309.7) = 0 42 31.10 41 16 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1571.2 +/- 48.5
  Background counts = 26.9
  Rate = 0.1 +/- 0.003

[Sun Feb  5 10:05:10 2012] Off-axis axis estimate = 4.19'
[Sun Feb  5 14:54:52 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 14:54:52 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Sun Feb  5 14:54:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Sun Feb  5 14:54:52 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.53"
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src9.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src9.csv
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src9.csv
[Sun Feb  5 18:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Feb  5 18:05:21 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Feb  5 21:08:19 2012] Spatial fit model total counts = 1970.850000, observed total counts = 1972.000000
[Sun Feb  5 21:08:19 2012] Offset between fit and detection position for source 21 = 0.222657 pixels
[Sun Feb  5 21:08:19 2012] 1929.243000 total counts/ 907.703000 bgd. counts: snr = 33.906541
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.222657 pixels
  Position = (355.1, 309.5) = 0 42 31.14 41 16 21.8
  Extent = 4.8 (4.6-5.1)", rotation angle = 0
  Source counts = 1021.5 +/- 43.9
  Background counts = 907.7
  Rate = 0.06 +/- 0.003
[Sun Feb  5 21:08:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:19 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:19 2012] Source does appear to be extended
[Sun Feb  5 21:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 00:25:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 00:25:34 2012] Initial guess for spatial extent in simple fitting = 4.82"
[Mon Feb  6 00:25:34 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.161
[Mon Feb  6 00:25:34 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.82"
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src10.ximg exists
[Mon Feb  6 02:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src10.csv
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Feb  6 02:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src10.csv
[Mon Feb  6 02:40:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Feb  6 02:40:18 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Feb  6 05:24:25 2012] Spatial fit model total counts = 1970.910000, observed total counts = 1972.000000
[Mon Feb  6 05:24:25 2012] Offset between fit and detection position for source 21 = 0.000042 pixels
[Mon Feb  6 05:24:25 2012] 1929.335000 total counts/ 908.075000 bgd. counts: snr = 33.890304
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.000042 pixels
  Position = (355.1, 309.5) = 0 42 31.14 41 16 21.8
  Extent = 4.8 (4.6-5.1)", rotation angle = 0
  Source counts = 1021.3 +/- 43.9
  Background counts = 908.1
  Rate = 0.06 +/- 0.003
[Mon Feb  6 05:24:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:26 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:26 2012] Source does appear to be extended
[Mon Feb  6 05:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb  7 06:12:55 2012] Counts = 1021.260000, rescaling region sizes by 2.000000
[Tue Feb  7 06:12:55 2012] XMMSAS src. selection expression = ellipse(30841.960640, 26878.208200, 577.749617, 577.749617, 0.000000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing source region out to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src21_src.reg
[Tue Feb  7 06:12:55 2012] Extracting stamp from image fullrun_mos1_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (322, 276) - (388, 343)
[Tue Feb  7 06:12:55 2012] XMMSAS bgd. selection expression = annulus(30841.960640, 26878.208200, 1925.832055, 3851.664111, X, Y) && !ellipse(29160.715600, 26515.406000, 436.658413, 419.483212, 22.675000, X, Y) && !ellipse(32685.302000, 25948.274000, 367.926411, 342.080810, 76.421000, X, Y) && !ellipse(26942.268600, 25709.844000, 501.800814, 501.800814, 0.000000, X, Y) && !ellipse(27472.684000, 26789.117600, 811.632023, 811.632023, 0.000000, X, Y) && !ellipse(27870.660000, 26609.568000, 405.816812, 405.816812, 0.000000, X, Y) && !ellipse(33670.865906, 24020.524719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34928.813477, 29543.962708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.556200, 26217.962580, 510.568015, 510.568015, 0.000000, X, Y) && !ellipse(30612.193400, 23110.871200, 463.716813, 463.716813, 0.000000, X, Y) && !ellipse(33033.547363, 26439.344025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31987.033640, 30333.266200, 398.675211, 344.419210, 39.639793, X, Y) && !ellipse(28688.950600, 23387.005000, 401.376012, 401.376012, 0.000000, X, Y) && !ellipse(32187.495600, 23651.673800, 295.448009, 295.448009, 0.000000, X, Y) && !ellipse(26769.688080, 26484.471558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28304.029880, 24957.723000, 305.605609, 305.605609, 0.000000, X, Y) && !ellipse(28798.767670, 29725.598572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28928.790480, 24576.848600, 336.671210, 336.671210, 0.000000, X, Y) && !ellipse(30827.281738, 30821.738037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32636.947000, 24207.088840, 254.571207, 254.571207, 0.000000, X, Y) && !ellipse(26777.891000, 28470.038200, 238.973607, 238.973607, 0.000000, X, Y) && !ellipse(27695.908325, 28220.502289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27159.562000, 25433.346000, 1119.576032, 1119.576032, 0.000000, X, Y) && !ellipse(34806.950000, 22762.792000, 1473.936042, 1473.936042, 0.000000, X, Y) && !ellipse(35134.949951, 28756.558014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26950.344238, 27600.855621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.705719, 25114.240143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.679993, 24826.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35183.725494, 27418.006409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29988.308411, 27264.489960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26515.596466, 27615.675995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.146000, 28278.884000, 1148.768033, 1148.768033, 0.000000, X, Y) && !ellipse(27681.849945, 24332.182678, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src21.gif
[Tue Feb  7 06:16:23 2012] Mean detx,y = (2289.30, 2001.84) 
[Tue Feb  7 06:16:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb  7 06:16:35 2012] Binned source spectrum to 10 counts/bin
[Tue Feb  7 06:16:35 2012] Setting source spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Feb  7 06:16:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Feb  7 10:42:28 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:28 2012] Error reading totcts from fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Feb  7 10:42:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:30 2012] Using photon index=1.80, rate=0.06, arf fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src21.arf
[Tue Feb  7 10:42:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:30 2012] Updating source flux to 6.4e-13