[Sun Feb  5 10:05:07 2012] Detection parameters:
  Position = (376.3, 298.8) = 0 42 22.94 41 15 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5272.8 +/- 86.4
  Background counts = 21.9
  Rate = 0.4 +/- 0.006

[Sun Feb  5 10:05:10 2012] Off-axis axis estimate = 5.65'
[Sun Feb  5 14:54:52 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 14:54:52 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Sun Feb  5 14:54:52 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.906
[Sun Feb  5 14:54:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.25"
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src3.csv
[Sun Feb  5 18:05:19 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb  5 18:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src3.csv
[Sun Feb  5 18:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb  5 18:05:21 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb  5 18:05:21 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb  5 21:08:19 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.254141 pixels away
[Sun Feb  5 21:08:19 2012] Spatial fit model total counts = 4976.690000, observed total counts = 4946.000000
[Sun Feb  5 21:08:19 2012] Offset between fit and detection position for source 2 = 0.074321 pixels
[Sun Feb  5 21:08:19 2012] Warning, changing simple spatial fit ID from 3 to 25
[Sun Feb  5 21:08:19 2012] 4823.690000 total counts/ 1590.980000 bgd. counts: snr = 81.046523
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.074321 pixels
  Position = (376.3, 298.8) = 0 42 22.97 41 15 35.2
  Extent = 4.4 (4.3-4.5)", rotation angle = 0
  Source counts = 3232.7 +/- 69.5
  Background counts = 1591.0
  Rate = 0.2 +/- 0.004
[Sun Feb  5 21:08:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 21:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 21:08:19 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 21:08:19 2012] Source does appear to be extended
[Sun Feb  5 21:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 21:08:19 2012] Source is confused with source 25
[Mon Feb  6 00:25:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 00:25:34 2012] Initial guess for spatial extent in simple fitting = 4.38"
[Mon Feb  6 00:25:34 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.992
[Mon Feb  6 00:25:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.38"
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src3.ximg exists
[Mon Feb  6 02:40:17 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Feb  6 02:40:17 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Feb  6 02:40:18 2012] fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Feb  6 02:40:18 2012] Fit fullrun_mos1_xmm0600660601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Feb  6 05:24:25 2012] Spatial fit model total counts = 5347.860000, observed total counts = 5343.000000
[Mon Feb  6 05:24:25 2012] Offset between fit and detection position for source 2 = 0.067996 pixels
[Mon Feb  6 05:24:25 2012] 5442.990000 total counts/ 1867.060000 bgd. counts: snr = 82.757978
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.067996 pixels
  Position = (376.2, 298.8) = 0 42 22.98 41 15 34.9
  Extent = 4.9 (4.8-5.1)", rotation angle = 0
  Source counts = 3575.9 +/- 73.8
  Background counts = 1867.1
  Rate = 0.2 +/- 0.004
[Mon Feb  6 05:24:25 2012] Spatial fit model total counts = 4925.810000, observed total counts = 4946.000000
[Mon Feb  6 05:24:25 2012] Offset between fit and detection position for source 2 = 0.067362 pixels
[Mon Feb  6 05:24:25 2012] Warning, changing simple spatial fit ID from 3 to 26
[Mon Feb  6 05:24:25 2012] 4776.580000 total counts/ 1551.710000 bgd. counts: snr = 81.866634
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.067362 pixels
  Position = (376.3, 298.8) = 0 42 22.97 41 15 35.2
  Extent = 4.6 (4.4-4.8)" x 4.3 (4.1-4.4)", rotation angle = 76 (76-76) degrees
  Source counts = 3224.9 +/- 69.1
  Background counts = 1551.7
  Rate = 0.2 +/- 0.004
[Mon Feb  6 05:24:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 05:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 05:24:26 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 05:24:26 2012] Source does appear to be extended
[Mon Feb  6 05:24:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Tue Feb  7 06:12:55 2012] Counts = 3224.870000, rescaling region sizes by 2.000000
[Tue Feb  7 06:12:55 2012] XMMSAS src. selection expression = ellipse(32685.302000, 25948.274000, 551.889616, 513.121215, 76.421000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing source region out to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src2_src.reg
[Tue Feb  7 06:12:55 2012] Extracting stamp from image fullrun_mos1_xmm0600660601_pi300-10000_cl_sm2.00.img.gz, (345, 267) - (408, 331)
[Tue Feb  7 06:12:55 2012] XMMSAS bgd. selection expression = annulus(32685.302000, 25948.274000, 1839.632053, 3679.264106, X, Y) && !ellipse(29160.715600, 26515.406000, 436.658413, 419.483212, 22.675000, X, Y) && !ellipse(30841.960640, 26878.208200, 385.166411, 385.166411, 0.000000, X, Y) && !ellipse(33670.865906, 24020.524719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34928.813477, 29543.962708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36129.782900, 29179.663600, 582.465617, 403.209612, 66.693570, X, Y) && !ellipse(33695.121200, 22102.777200, 695.220020, 695.220020, 0.000000, X, Y) && !ellipse(30612.193400, 23110.871200, 463.716813, 463.716813, 0.000000, X, Y) && !ellipse(33033.547363, 26439.344025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28688.950600, 23387.005000, 401.376012, 401.376012, 0.000000, X, Y) && !ellipse(32187.495600, 23651.673800, 295.448009, 295.448009, 0.000000, X, Y) && !ellipse(31483.746400, 22099.741600, 328.408809, 328.408809, 0.000000, X, Y) && !ellipse(28798.767670, 29725.598572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28928.790480, 24576.848600, 336.671210, 336.671210, 0.000000, X, Y) && !ellipse(32636.947000, 24207.088840, 254.571207, 254.571207, 0.000000, X, Y) && !ellipse(34806.950000, 22762.792000, 1473.936042, 1473.936042, 0.000000, X, Y) && !ellipse(35134.949951, 28756.558014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35183.725494, 27418.006409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29988.308411, 27264.489960, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb  7 06:12:55 2012] Writing fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src2.gif
[Tue Feb  7 06:13:27 2012] Mean detx,y = (2653.94, 4050.13) 
[Tue Feb  7 06:13:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb  7 06:13:44 2012] Binned source spectrum to 10 counts/bin
[Tue Feb  7 06:13:45 2012] Setting source spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb  7 06:13:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Feb  7 10:42:28 2012] Updating aperture counts using extracted products
[Tue Feb  7 10:42:28 2012] Error reading totcts from fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb  7 10:42:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb  7 10:42:29 2012] Using photon index=1.80, rate=0.19, arf fullrun_mos1_xmm0600660601_pi300-10000_pass1_cl_src2.arf
[Tue Feb  7 10:42:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb  7 10:42:29 2012] Updating source flux to 2.3e-12
[Tue Feb  7 10:42:35 2012] Flag c found in src. 2 procflags, skipping spectral fitting