[Sat Mar 3 10:03:42 2012] Detection parameters: Position = (313.9, 285.0) = 0 42 46.66 41 14 28.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 231.2 +/- 30.4 Background counts = 166.1 Rate = 0.02 +/- 0.002 [Sat Mar 3 10:03:43 2012] Off-axis axis estimate = 1.49' [Sat Mar 3 10:05:45 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting [Sat Mar 3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 7.17" [Sat Mar 3 10:05:45 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.866 [Sat Mar 3 10:05:45 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 7.17" [Sat Mar 3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src91.ximg exists [Sat Mar 3 13:26:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src91.csv [Sat Mar 3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src91_1.ximg exists [Sat Mar 3 13:26:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src91.csv [Sat Mar 3 13:26:03 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src91_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Mar 3 13:26:04 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src91.ximg exists [Sat Mar 3 13:26:04 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists [Sat Mar 3 13:26:04 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly [Sat Mar 3 18:30:22 2012] Warning: source 91 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 95 at 10.667556 pixels away [Sat Mar 3 18:30:22 2012] Source 95 is offset by 3.421416 and 7.075197 pixels which is larger than 2 X fitted extent = 0.870377 x 0.870377, not incorporating fit results [Sat Mar 3 18:30:22 2012] Vigneting correction estimate = 1.000000 [Sat Mar 3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 3 18:30:22 2012] Assessing source extent using major [Sat Mar 3 18:30:22 2012] Source does appear to be extended [Sat Mar 3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Mar 3 18:30:22 2012] Source is confused with source 96 [Sat Mar 3 18:31:01 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting [Sat Mar 3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 7.17" [Sat Mar 3 18:31:01 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.866 [Sat Mar 3 18:31:01 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 7.17" [Sat Mar 3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src82.ximg exists [Sat Mar 3 21:39:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src82.csv [Sat Mar 3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src82_1.ximg exists [Sat Mar 3 21:39:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src82.csv [Sat Mar 3 21:39:37 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src82_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Mar 3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src82.ximg exists [Sat Mar 3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists [Sat Mar 3 21:39:38 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly [Sun Mar 4 02:08:59 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 95 at 12.196871 pixels away [Sun Mar 4 02:08:59 2012] Warning: source 82 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 95 at 10.667556 pixels away [Sun Mar 4 02:08:59 2012] Vigneting correction estimate = 1.000000 [Sun Mar 4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Mar 4 02:08:59 2012] Assessing source extent using major [Sun Mar 4 02:08:59 2012] Source does appear to be extended [Sun Mar 4 02:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Mar 4 02:09:37 2012] XMMSAS src. selection expression = ellipse(27263.921783, 24749.824097, 652.500000, 652.500000, 0.000000, X, Y) [Sun Mar 4 02:09:37 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src95_src.reg [Sun Mar 4 02:09:37 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (276, 248) - (351, 323) [Sun Mar 4 02:09:37 2012] XMMSAS bgd. selection expression = annulus(27263.921783, 24749.824097, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.469097, 24604.654184, 1400.278189, 1351.906014, 74.457379, X, Y) && !ellipse(29090.668000, 26621.338000, 1182.854434, 1182.854434, 0.000000, X, Y) && !ellipse(27508.074400, 26894.512800, 1165.184034, 1165.184034, 0.000000, X, Y) && !ellipse(27787.841370, 26748.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.156250, 26574.506256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.545013, 26576.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.450928, 26659.414093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.715980, 26133.583800, 356.246410, 356.246410, 0.000000, X, Y) && !ellipse(26861.323600, 25781.883400, 456.289613, 456.289613, 0.000000, X, Y) && !ellipse(28206.998000, 26333.352000, 876.088025, 876.088025, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(25981.356781, 27435.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30152.407806, 26923.820496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28238.747650, 25081.771790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.790039, 23505.873840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.613068, 27727.803192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.122467, 27136.036987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24808.402008, 25590.884277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.862885, 24324.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24445.196000, 22617.170000, 1310.856038, 529.228015, 293.759100, X, Y) && !ellipse(24308.252000, 22021.814000, 2437.584070, 2437.584070, 0.000000, X, Y) [Sun Mar 4 02:09:37 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src95.gif [Sun Mar 4 03:12:18 2012] Mean detx,y = (667.20, 1743.76) [Sun Mar 4 03:12:19 2012] Setting backscal keywords in source and bgd. spectrum [Sun Mar 4 03:12:30 2012] Binned source spectrum to 10 counts/bin [Sun Mar 4 03:12:30 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src95_src_b10.pi.gz [Sun Mar 4 03:12:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src95_bgd.pi.gz [Sun Mar 4 10:30:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Mar 4 10:30:37 2012] rmf not generated due to insufficient counts [Sun Mar 4 16:32:37 2012] Updating aperture counts using extracted products [Sun Mar 4 16:32:37 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src95_src_b10.pi.gz [Sun Mar 4 16:32:39 2012] Calculating source flux in energy range 0.30-8.00 [Sun Mar 4 16:32:39 2012] Using photon index=1.80, rate=0.0154, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src95.arf [Sun Mar 4 16:32:39 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Mar 4 16:32:39 2012] Updating source flux to 3.7e-14 [Sun Mar 4 16:41:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting