[Sat Mar  3 10:03:42 2012] Detection parameters:
  Position = (285.7, 294.7) = 0 42 57.55 41 15 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.6 +/- 23.7
  Background counts = 145.9
  Rate = 0.01 +/- 0.002

[Sat Mar  3 10:03:43 2012] Off-axis axis estimate = 0.96'
[Sat Mar  3 10:05:45 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Sat Mar  3 10:05:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.860
[Sat Mar  3 10:05:45 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 6.91"
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src88.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src88.csv
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src88_1.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src88.csv
[Sat Mar  3 13:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:26:04 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Sat Mar  3 13:26:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sat Mar  3 13:26:04 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Sat Mar  3 13:26:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sat Mar  3 13:26:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:21 2012] Source 92 is offset by 0.115425 and -6.698342 pixels which is larger than
2 X fitted extent = 0.824510 x 0.824510, not incorporating fit results
[Sat Mar  3 18:30:21 2012] Warning, spatial fit 88 centroid is now closest to src. 18
[Sat Mar  3 18:30:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:22 2012] Assessing source extent using major
[Sat Mar  3 18:30:22 2012] Source does appear to be extended
[Sat Mar  3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:31:01 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Sat Mar  3 18:31:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.860
[Sat Mar  3 18:31:01 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 6.91"
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src80.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src80.csv
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src80_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src80.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sat Mar  3 21:39:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sat Mar  3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sat Mar  3 21:39:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sat Mar  3 21:39:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:59 2012] Spatial fit model total counts = 5210.780000, observed total counts = 1664.000000
[Sun Mar  4 02:08:59 2012] Poor agreement between spatial fit and data for source 92
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar  4 02:08:59 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:08:59 2012] Assessing source extent using major
[Sun Mar  4 02:08:59 2012] Source does appear to be extended
[Sun Mar  4 02:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 02:09:37 2012] XMMSAS src. selection expression = ellipse(24808.402008, 25590.884277, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 02:09:37 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src92_src.reg
[Sun Mar  4 02:09:37 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (248, 257) - (323, 332)
[Sun Mar  4 02:09:37 2012] XMMSAS bgd. selection expression = annulus(24808.402008, 25590.884277, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.469097, 24604.654184, 1400.278189, 1351.906014, 74.457379, X, Y) && !ellipse(27508.074400, 26894.512800, 1165.184034, 1165.184034, 0.000000, X, Y) && !ellipse(27787.841370, 26748.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.156250, 26574.506256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.545013, 26576.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.450928, 26659.414093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.715980, 26133.583800, 356.246410, 356.246410, 0.000000, X, Y) && !ellipse(26861.323600, 25781.883400, 456.289613, 456.289613, 0.000000, X, Y) && !ellipse(23559.226400, 25857.414800, 426.233612, 426.233612, 0.000000, X, Y) && !ellipse(21865.834366, 25202.973877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(25981.356781, 27435.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22345.668518, 22777.182465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25587.727448, 28243.433777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.613068, 27727.803192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.921783, 24749.824097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.862885, 24324.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.332458, 23272.863159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24445.196000, 22617.170000, 1310.856038, 529.228015, 293.759100, X, Y) && !ellipse(24308.252000, 22021.814000, 2437.584070, 2437.584070, 0.000000, X, Y)
[Sun Mar  4 02:09:37 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src92.gif
[Sun Mar  4 03:11:24 2012] Mean detx,y = (-1678.33, 2298.51) 
[Sun Mar  4 03:11:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 03:11:39 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 03:11:39 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sun Mar  4 03:11:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Sun Mar  4 10:22:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 10:22:40 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:37 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:37 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sun Mar  4 16:32:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:39 2012] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src92.arf
[Sun Mar  4 16:32:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:39 2012] Updating source flux to 3.5e-14
[Sun Mar  4 16:41:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting