[Sat Mar  3 10:03:41 2012] Detection parameters:
  Position = (329.6, 270.7) = 0 42 40.61 41 13 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 909.6 +/- 41.0
  Background counts = 161.1
  Rate = 0.06 +/- 0.003

[Sat Mar  3 10:03:43 2012] Off-axis axis estimate = 3.02'
[Sat Mar  3 10:05:45 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Mar  3 10:05:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.156
[Sat Mar  3 10:05:45 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.94"
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src63.ximg exists
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Mar  3 13:26:02 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src63 appears to have run properly
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Mar  3 13:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:21 2012] Warning, spatial fit 63 centroid is now closest to src. 96
[Sat Mar  3 18:30:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:22 2012] Assessing source extent using major
[Sat Mar  3 18:30:22 2012] Source does appear to be extended
[Sat Mar  3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:31:01 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Mar  3 18:31:01 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.156
[Sat Mar  3 18:31:01 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 7.94"
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src61.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src61.csv
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src61_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src61.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sat Mar  3 21:39:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sat Mar  3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sat Mar  3 21:39:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sat Mar  3 21:39:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:59 2012] Warning, spatial fit 61 centroid is now closest to src. 96
[Sun Mar  4 02:08:59 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:08:59 2012] Assessing source extent using major
[Sun Mar  4 02:08:59 2012] Source does appear to be extended
[Sun Mar  4 02:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 02:09:36 2012] XMMSAS src. selection expression = ellipse(28628.790039, 23505.873840, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 02:09:36 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src65_src.reg
[Sun Mar  4 02:09:36 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (292, 233) - (367, 308)
[Sun Mar  4 02:09:36 2012] XMMSAS bgd. selection expression = annulus(28628.790039, 23505.873840, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.469097, 24604.654184, 1400.278189, 1351.906014, 74.457379, X, Y) && !ellipse(29090.668000, 26621.338000, 1182.854434, 1182.854434, 0.000000, X, Y) && !ellipse(26861.323600, 25781.883400, 456.289613, 456.289613, 0.000000, X, Y) && !ellipse(28206.998000, 26333.352000, 876.088025, 876.088025, 0.000000, X, Y) && !ellipse(30545.295000, 23229.192600, 462.102413, 462.102413, 0.000000, X, Y) && !ellipse(31415.553925, 22213.292740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27677.129303, 21320.957306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(28238.747650, 25081.771790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30345.988647, 25549.274658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.921783, 24749.824097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.862885, 24324.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31233.087036, 23888.450287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24308.252000, 22021.814000, 2437.584070, 2437.584070, 0.000000, X, Y)
[Sun Mar  4 02:09:36 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src65.gif
[Sun Mar  4 03:04:42 2012] Mean detx,y = (2491.98, 2090.22) 
[Sun Mar  4 03:04:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 03:04:56 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 03:04:56 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sun Mar  4 03:04:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sun Mar  4 10:13:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 10:13:16 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:36 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:36 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sun Mar  4 16:32:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:38 2012] Using photon index=1.80, rate=0.0633, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src65.arf
[Sun Mar  4 16:32:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:38 2012] Updating source flux to 1.6e-13
[Sun Mar  4 16:41:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting