[Sat Mar  3 10:03:41 2012] Detection parameters:
  Position = (347.1, 310.0) = 0 42 33.85 41 16 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 824.0 +/- 42.4
  Background counts = 142.9
  Rate = 0.06 +/- 0.003

[Sat Mar  3 10:03:43 2012] Off-axis axis estimate = 3.63'
[Sat Mar  3 10:05:45 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Sat Mar  3 10:05:45 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Sat Mar  3 10:05:45 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 8.24"
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src54.ximg exists
[Sat Mar  3 13:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src54.csv
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src54_1.ximg exists
[Sat Mar  3 13:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src54.csv
[Sat Mar  3 13:26:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sat Mar  3 13:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:21 2012] Warning, spatial fit 54 centroid is now closest to src. 3
[Sat Mar  3 18:30:22 2012] Warning: source 90 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 12.242740 pixels away
[Sat Mar  3 18:30:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:22 2012] Assessing source extent using major
[Sat Mar  3 18:30:22 2012] Source does appear to be extended
[Sat Mar  3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:30:22 2012] Source is confused with source 16
[Sat Mar  3 18:31:01 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Sat Mar  3 18:31:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Sat Mar  3 18:31:01 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 8.24"
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src53.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src53.csv
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src53_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src53.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:59 2012] Spatial fit model total counts = 4815.910000, observed total counts = 4193.000000
[Sun Mar  4 02:08:59 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar  4 02:08:59 2012] Source 56 is offset by -2.496669 and -8.339787 pixels which is larger than
2 X fitted extent = 1.754503 x 0.954193, not incorporating fit results
[Sun Mar  4 02:08:59 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:08:59 2012] Assessing source extent using major
[Sun Mar  4 02:08:59 2012] Source does appear to be extended
[Sun Mar  4 02:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 02:09:36 2012] XMMSAS src. selection expression = ellipse(30152.407806, 26923.820496, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 02:09:36 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src56_src.reg
[Sun Mar  4 02:09:36 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (310, 273) - (385, 348)
[Sun Mar  4 02:09:36 2012] XMMSAS bgd. selection expression = annulus(30152.407806, 26923.820496, 1087.500000, 2175.000000, X, Y) && !ellipse(32612.623800, 26049.129800, 430.657612, 430.657612, 0.000000, X, Y) && !ellipse(29090.668000, 26621.338000, 1182.854434, 1182.854434, 0.000000, X, Y) && !ellipse(27508.074400, 26894.512800, 1165.184034, 1165.184034, 0.000000, X, Y) && !ellipse(32963.876740, 26467.585571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27787.841370, 26748.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30774.550800, 26980.100000, 408.022412, 408.022412, 0.000000, X, Y) && !ellipse(28206.998000, 26333.352000, 876.088025, 876.088025, 0.000000, X, Y) && !ellipse(28788.538000, 29261.726000, 1275.008037, 1275.008037, 0.000000, X, Y) && !ellipse(27675.994000, 28526.068000, 414.016812, 414.016812, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(28238.747650, 25081.771790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29518.941711, 29341.160950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.786011, 28738.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29739.529510, 28278.071289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.122467, 27136.036987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30345.988647, 25549.274658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.921783, 24749.824097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.862885, 24324.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31233.087036, 23888.450287, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 02:09:36 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src56.gif
[Sun Mar  4 03:00:42 2012] Mean detx,y = (2154.91, -1753.80) 
[Sun Mar  4 03:00:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 03:01:02 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 03:01:02 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun Mar  4 03:01:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sun Mar  4 10:03:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 10:03:16 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:36 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:36 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun Mar  4 16:32:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:38 2012] Using photon index=1.80, rate=0.0582, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src56.arf
[Sun Mar  4 16:32:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:38 2012] Updating source flux to 1.5e-13
[Sun Mar  4 16:41:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting