[Sat Mar  3 10:03:41 2012] Detection parameters:
  Position = (299.2, 315.9) = 0 42 52.35 41 16 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 599.2 +/- 35.9
  Background counts = 148.5
  Rate = 0.05 +/- 0.003

[Sat Mar  3 10:03:43 2012] Off-axis axis estimate = 1.27'
[Sat Mar  3 10:05:45 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Sat Mar  3 10:05:45 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.832
[Sat Mar  3 10:05:45 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.06"
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src53.ximg exists
[Sat Mar  3 13:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src53.csv
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat Mar  3 13:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src53.csv
[Sat Mar  3 13:26:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Mar  3 13:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:21 2012] Spatial fit model total counts = 2978.420000, observed total counts = 2456.000000
[Sat Mar  3 18:30:21 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar  3 18:30:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:22 2012] Assessing source extent using major
[Sat Mar  3 18:30:22 2012] Source does appear to be extended
[Sat Mar  3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:30:22 2012] Source is confused with source 90
[Sat Mar  3 18:31:01 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Sat Mar  3 18:31:01 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.832
[Sat Mar  3 18:31:01 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 7.06"
[Sat Mar  3 21:39:36 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src52.ximg exists
[Sat Mar  3 21:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src52.csv
[Sat Mar  3 21:39:36 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src52.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:59 2012] Spatial fit model total counts = 2977.430000, observed total counts = 2456.000000
[Sun Mar  4 02:08:59 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar  4 02:08:59 2012] Source 55 is offset by -2.439784 and -2.755305 pixels which is larger than
2 X fitted extent = 0.954193 x 0.954193, not incorporating fit results
[Sun Mar  4 02:08:59 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:08:59 2012] Assessing source extent using major
[Sun Mar  4 02:08:59 2012] Source does appear to be extended
[Sun Mar  4 02:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 02:09:36 2012] XMMSAS src. selection expression = ellipse(25981.356781, 27435.633148, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 02:09:36 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src55_src.reg
[Sun Mar  4 02:09:36 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (262, 278) - (337, 353)
[Sun Mar  4 02:09:36 2012] XMMSAS bgd. selection expression = annulus(25981.356781, 27435.633148, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.469097, 24604.654184, 1400.278189, 1351.906014, 74.457379, X, Y) && !ellipse(29090.668000, 26621.338000, 1182.854434, 1182.854434, 0.000000, X, Y) && !ellipse(25965.662903, 30076.216431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.074400, 26894.512800, 1165.184034, 1165.184034, 0.000000, X, Y) && !ellipse(27787.841370, 26748.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.156250, 26574.506256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.545013, 26576.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.450928, 26659.414093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.715980, 26133.583800, 356.246410, 356.246410, 0.000000, X, Y) && !ellipse(26861.323600, 25781.883400, 456.289613, 456.289613, 0.000000, X, Y) && !ellipse(28206.998000, 26333.352000, 876.088025, 876.088025, 0.000000, X, Y) && !ellipse(23559.226400, 25857.414800, 426.233612, 426.233612, 0.000000, X, Y) && !ellipse(25324.831757, 29733.176025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28788.538000, 29261.726000, 1275.008037, 1275.008037, 0.000000, X, Y) && !ellipse(26713.574036, 28781.658661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27675.994000, 28526.068000, 414.016812, 414.016812, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(28238.747650, 25081.771790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.786011, 28738.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.110687, 28653.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25587.727448, 28243.433777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.613068, 27727.803192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24808.402008, 25590.884277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.921783, 24749.824097, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 02:09:36 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src55.gif
[Sun Mar  4 03:00:21 2012] Mean detx,y = (-1665.81, 162.87) 
[Sun Mar  4 03:00:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 03:00:34 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 03:00:34 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun Mar  4 03:00:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sun Mar  4 10:03:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 10:03:00 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:36 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:36 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun Mar  4 16:32:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:38 2012] Using photon index=1.80, rate=0.0452, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src55.arf
[Sun Mar  4 16:32:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:38 2012] Updating source flux to 1.5e-13
[Sun Mar  4 16:41:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting