[Sat Mar  3 10:03:40 2012] Detection parameters:
  Position = (309.5, 435.0) = 0 42 48.36 41 25 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2039.9 +/- 53.8
  Background counts = 74.8
  Rate = 0.1 +/- 0.003

[Sat Mar  3 10:03:43 2012] Off-axis axis estimate = 9.93'
[Sat Mar  3 10:05:45 2012] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 11.39"
[Sat Mar  3 10:05:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 38, frac = 0.976
[Sat Mar  3 10:05:45 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.39"
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Mar  3 13:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src5.csv
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Mar  3 13:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src5.csv
[Sat Mar  3 13:26:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Mar  3 13:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:21 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.421701 pixels away
[Sat Mar  3 18:30:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:22 2012] Assessing source extent using major
[Sat Mar  3 18:30:22 2012] Source does appear to be extended
[Sat Mar  3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:31:01 2012] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 11.39"
[Sat Mar  3 18:31:01 2012] source mask rpix=2.6, npix_max = 38, mask sum = 38, frac = 0.976
[Sat Mar  3 18:31:01 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.39"
[Sat Mar  3 21:39:36 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Mar  3 21:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src5.csv
[Sat Mar  3 21:39:36 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Mar  3 21:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src5.csv
[Sat Mar  3 21:39:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:59 2012] Spatial fit model total counts = 1783.870000, observed total counts = 1526.000000
[Sun Mar  4 02:08:59 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar  4 02:08:59 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:08:59 2012] Assessing source extent using major
[Sun Mar  4 02:08:59 2012] Source does appear to be extended
[Sun Mar  4 02:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 02:09:33 2012] Counts = 2039.876221, rescaling region sizes by 2.000000
[Sun Mar  4 02:09:33 2012] XMMSAS src. selection expression = ellipse(26877.758392, 37792.302399, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar  4 02:09:33 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src5_src.reg
[Sun Mar  4 02:09:33 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (234, 360) - (384, 510)
[Sun Mar  4 02:09:33 2012] XMMSAS bgd. selection expression = annulus(26877.758392, 37792.302399, 4350.000000, 8700.000000, X, Y) && !ellipse(23941.686279, 43706.133240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.802445, 30529.063315, 451.298241, 392.761110, 327.424011, X, Y) && !ellipse(25965.662903, 30076.216431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.914000, 29680.683800, 448.995213, 448.995213, 0.000000, X, Y) && !ellipse(23388.182800, 29038.336600, 411.216012, 411.216012, 0.000000, X, Y) && !ellipse(26007.992035, 44695.630798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31210.543182, 42211.343781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33142.918640, 39345.738800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25332.393280, 38484.516327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23528.855266, 32983.775200, 467.768813, 341.156810, 340.997367, X, Y) && !ellipse(35723.473160, 32302.227800, 459.605613, 459.605613, 0.000000, X, Y) && !ellipse(29864.945129, 31450.650757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30783.091431, 30967.953156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31929.793274, 30427.537872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25324.831757, 29733.176025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28788.538000, 29261.726000, 1275.008037, 1275.008037, 0.000000, X, Y) && !ellipse(17976.937286, 29538.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26713.574036, 28781.658661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35047.140167, 28926.902039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(26325.305206, 44662.166809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.549744, 36193.836700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34322.848175, 32042.236420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22568.327240, 31742.403961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19982.059219, 31688.886536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29518.941711, 29341.160950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.786011, 28738.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.110687, 28653.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.546661, 28776.815887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35658.017273, 28681.797699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29739.529510, 28278.071289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25587.727448, 28243.433777, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 02:09:33 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src5.gif
[Sun Mar  4 02:15:25 2012] Mean detx,y = (-6505.60, -9117.17) 
[Sun Mar  4 02:15:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 02:17:29 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 02:17:30 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar  4 02:17:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Mar  4 03:39:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 03:39:03 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:35 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:35 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar  4 16:32:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:37 2012] Using photon index=1.80, rate=0.114, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src5.arf
[Sun Mar  4 16:32:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:37 2012] Updating source flux to 5.6e-13
[Sun Mar  4 16:41:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting