[Sat Mar  3 10:03:40 2012] Detection parameters:
  Position = (298.9, 301.0) = 0 42 52.48 41 15 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5609.4 +/- 93.3
  Background counts = 155.1
  Rate = 0.4 +/- 0.006

[Sat Mar  3 10:03:43 2012] Off-axis axis estimate = 0.19'
[Sat Mar  3 10:05:45 2012] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 6.52"
[Sat Mar  3 10:05:45 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Sat Mar  3 10:05:45 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 6.52"
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src20.ximg exists
[Sat Mar  3 13:26:02 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Mar  3 13:26:02 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src20 appears to have run properly
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Mar  3 13:26:03 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Mar  3 18:30:21 2012] Spatial fit model total counts = 8042.220000, observed total counts = 6799.000000
[Sat Mar  3 18:30:21 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar  3 18:30:21 2012] Spatial fit model total counts = 9334.310000, observed total counts = 9347.000000
[Sat Mar  3 18:30:21 2012] Offset between fit and detection position for source 20 = 0.081681 pixels
[Sat Mar  3 18:30:21 2012] 9150.220000 total counts/ 7126.250000 bgd. counts: snr = 23.975824
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.081681 pixels
  Position = (298.8, 300.9) = 0 42 52.50 41 15 38.4
  Extent = 4.5 (4.2-4.6)", rotation angle = 0
  Source counts = 2024.0 +/- 95.7
  Background counts = 7126.2
  Rate = 0.2 +/- 0.008
[Sat Mar  3 18:30:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:22 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:30:22 2012] Source does appear to be extended
[Sat Mar  3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:31:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 4.45"
[Sat Mar  3 18:31:01 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.969
[Sat Mar  3 18:31:01 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 4.45"
[Sat Mar  3 21:39:36 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src20.ximg exists
[Sat Mar  3 21:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src20.csv
[Sat Mar  3 21:39:36 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Mar  3 21:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src20.csv
[Sat Mar  3 21:39:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Mar  3 21:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Mar  3 21:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:59 2012] Warning, spatial fit 20 centroid is now closest to src. 18
[Sun Mar  4 02:08:59 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:08:59 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:08:59 2012] Source does appear to be extended
[Sun Mar  4 02:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 02:09:34 2012] Counts = 2023.970000, rescaling region sizes by 2.000000
[Sun Mar  4 02:09:34 2012] XMMSAS src. selection expression = ellipse(25946.715980, 26133.583800, 534.369615, 534.369615, 0.000000, X, Y)
[Sun Mar  4 02:09:34 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src20_src.reg
[Sun Mar  4 02:09:34 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (268, 270) - (330, 332)
[Sun Mar  4 02:09:34 2012] XMMSAS bgd. selection expression = annulus(25946.715980, 26133.583800, 1781.232051, 3562.464103, X, Y) && !ellipse(25800.469097, 24604.654184, 1400.278189, 1351.906014, 74.457379, X, Y) && !ellipse(29090.668000, 26621.338000, 1182.854434, 1182.854434, 0.000000, X, Y) && !ellipse(25965.662903, 30076.216431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23388.182800, 29038.336600, 411.216012, 411.216012, 0.000000, X, Y) && !ellipse(27508.074400, 26894.512800, 1165.184034, 1165.184034, 0.000000, X, Y) && !ellipse(27787.841370, 26748.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.156250, 26574.506256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.545013, 26576.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.450928, 26659.414093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26861.323600, 25781.883400, 456.289613, 456.289613, 0.000000, X, Y) && !ellipse(28206.998000, 26333.352000, 876.088025, 876.088025, 0.000000, X, Y) && !ellipse(23559.226400, 25857.414800, 426.233612, 426.233612, 0.000000, X, Y) && !ellipse(21865.834366, 25202.973877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25324.831757, 29733.176025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28788.538000, 29261.726000, 1275.008037, 1275.008037, 0.000000, X, Y) && !ellipse(26713.574036, 28781.658661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27675.994000, 28526.068000, 414.016812, 414.016812, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(25981.356781, 27435.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30152.407806, 26923.820496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28238.747650, 25081.771790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.790039, 23505.873840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22345.668518, 22777.182465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29518.941711, 29341.160950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.786011, 28738.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.110687, 28653.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29739.529510, 28278.071289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25587.727448, 28243.433777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.613068, 27727.803192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29682.122467, 27136.036987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24808.402008, 25590.884277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30345.988647, 25549.274658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.921783, 24749.824097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.862885, 24324.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.332458, 23272.863159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24445.196000, 22617.170000, 1310.856038, 529.228015, 293.759100, X, Y) && !ellipse(24308.252000, 22021.814000, 2437.584070, 2437.584070, 0.000000, X, Y)
[Sun Mar  4 02:09:34 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src20.gif
[Sun Mar  4 02:35:34 2012] Mean detx,y = (-1153.56, 1258.35) 
[Sun Mar  4 02:35:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 02:35:51 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 02:35:52 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Mar  4 02:35:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Mar  4 16:32:35 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:35 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Mar  4 16:32:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:37 2012] Using photon index=1.80, rate=0.162, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src20.arf
[Sun Mar  4 16:32:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:38 2012] Updating source flux to 4.2e-13
[Sun Mar  4 16:41:35 2012] Flag p found in src. 20 procflags, skipping spectral fitting