[Sat Mar  3 10:03:42 2012] Detection parameters:
  Position = (289.1, 267.0) = 0 42 56.26 41 13 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.7 +/- 22.5
  Background counts = 138.8
  Rate = 0.008 +/- 0.002

[Sat Mar  3 10:03:43 2012] Off-axis axis estimate = 2.38'
[Sat Mar  3 10:05:45 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:05:45 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sat Mar  3 10:05:45 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.789
[Sat Mar  3 10:05:45 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 7.62"
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src98.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src98.csv
[Sat Mar  3 13:26:03 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src98_1.ximg exists
[Sat Mar  3 13:26:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src98.csv
[Sat Mar  3 13:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:26:04 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sat Mar  3 13:26:04 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sat Mar  3 13:26:04 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Sat Mar  3 18:30:22 2012] Source 102 is offset by 4.568619 and -1.503220 pixels which is larger than
2 X fitted extent = 1.060749 x 1.060749, not incorporating fit results
[Sat Mar  3 18:30:22 2012] Spatial fit model total counts = 1409.240000, observed total counts = 1411.000000
[Sat Mar  3 18:30:22 2012] Offset between fit and detection position for source 102 = 6.721044 pixels
[Sat Mar  3 18:30:22 2012] 1503.070000 total counts/ 1162.670000 bgd. counts: snr = 9.983006
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 6.721044 pixels
  Position = (284.7, 261.9) = 0 42 57.93 41 12 48.5
  Extent = 15.2 (15.2-30.5)", rotation angle = 0
  Source counts = 340.4 +/- 38.8
  Background counts = 1162.7
  Rate = 0.03 +/- 0.003
[Sat Mar  3 18:30:22 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:22 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:30:22 2012] Source does appear to be extended
[Sat Mar  3 18:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:30:22 2012] Source is confused with source 101
[Sat Mar  3 18:31:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 18:31:01 2012] Initial guess for spatial extent in simple fitting = 15.23"
[Sat Mar  3 18:31:01 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.999
[Sat Mar  3 18:31:01 2012] Giving source the simple spatial ID 89 for pass 1, mean size = 15.23"
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src89.ximg exists
[Sat Mar  3 21:39:37 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src89_1.ximg exists
[Sat Mar  3 21:39:37 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_src89 appears to have run properly
[Sat Mar  3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Sat Mar  3 21:39:38 2012] fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Sat Mar  3 21:39:38 2012] Fit fullrun_pn_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly
[Sun Mar  4 02:08:59 2012] Warning, spatial fit 89 centroid is now closest to src. 104
[Sun Mar  4 02:08:59 2012] Spatial fit model total counts = 891.720000, observed total counts = 890.000000
[Sun Mar  4 02:08:59 2012] Offset between fit and detection position for source 102 = 3.447247 pixels
[Sun Mar  4 02:08:59 2012] Warning, changing simple spatial fit ID from 89 to 90
[Sun Mar  4 02:08:59 2012] 872.403000 total counts/ 759.532000 bgd. counts: snr = 4.095523
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 3.447247 pixels
  Position = (281.5, 260.5) = 0 42 59.15 41 12 42.6
  Extent = 16.4 (11.2-32.8)" x 6.6 (4.6-9.8)", rotation angle = 294 (280-307) degrees
  Source counts = 112.9 +/- 29.5
  Background counts = 759.5
  Rate = 0.009 +/- 0.002
[Sun Mar  4 02:08:59 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:08:59 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:08:59 2012] Source does appear to be extended
[Sun Mar  4 02:08:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Sun Mar  4 02:09:37 2012] XMMSAS src. selection expression = ellipse(24445.196000, 22617.170000, 983.142028, 396.921011, 293.759100, X, Y)
[Sun Mar  4 02:09:37 2012] Writing source region out to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src102_src.reg
[Sun Mar  4 02:09:37 2012] Extracting stamp from image fullrun_pn_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (225, 204) - (338, 317)
[Sun Mar  4 02:09:37 2012] XMMSAS bgd. selection expression = annulus(24445.196000, 22617.170000, 1638.570047, 3277.140094, X, Y) && !ellipse(25800.469097, 24604.654184, 1400.278189, 1351.906014, 74.457379, X, Y) && !ellipse(27508.074400, 26894.512800, 1165.184034, 1165.184034, 0.000000, X, Y) && !ellipse(27787.841370, 26748.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.156250, 26574.506256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.545013, 26576.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.450928, 26659.414093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.715980, 26133.583800, 356.246410, 356.246410, 0.000000, X, Y) && !ellipse(26861.323600, 25781.883400, 456.289613, 456.289613, 0.000000, X, Y) && !ellipse(28206.998000, 26333.352000, 876.088025, 876.088025, 0.000000, X, Y) && !ellipse(23559.226400, 25857.414800, 426.233612, 426.233612, 0.000000, X, Y) && !ellipse(21865.834366, 25202.973877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27677.129303, 21320.957306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24730.209200, 20644.496400, 423.504812, 423.504812, 0.000000, X, Y) && !ellipse(27994.722000, 27995.492000, 2550.016073, 2550.016073, 0.000000, X, Y) && !ellipse(28238.747650, 25081.771790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22345.668518, 22777.182465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.994690, 20316.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24808.402008, 25590.884277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.921783, 24749.824097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.862885, 24324.804352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.332458, 23272.863159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24308.252000, 22021.814000, 2437.584070, 2437.584070, 0.000000, X, Y) && !ellipse(20777.879028, 21045.953354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22904.212341, 19966.466232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22433.171000, 19124.752000, 1525.232044, 501.037614, 126.281900, X, Y) && !ellipse(22583.291831, 19279.168352, 1794.048052, 1192.731903, 120.934666, X, Y)
[Sun Mar  4 02:09:37 2012] Writing fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src102.gif
[Sun Mar  4 03:14:06 2012] Mean detx,y = (-587.80, 5058.54) 
[Sun Mar  4 03:14:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 03:14:22 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 03:14:22 2012] Setting source spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sun Mar  4 03:14:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sun Mar  4 16:32:37 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:37 2012] Error reading totcts from fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sun Mar  4 16:32:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:39 2012] Using photon index=1.80, rate=0.00901, arf fullrun_pn_xmm0600660501_pi300-10000_pass1_cl_src102.arf
[Sun Mar  4 16:32:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:39 2012] Updating source flux to 3e-14
[Sun Mar  4 16:41:35 2012] Flag b found in src. 102 procflags, skipping spectral fitting
[Sun Mar  4 16:41:35 2012] Flag c found in src. 102 procflags, skipping spectral fitting