[Sat Mar  3 10:03:47 2012] Detection parameters:
  Position = (251.8, 290.0) = 0 43 10.62 41 14 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1927.5 +/- 53.4
  Background counts = 23.0
  Rate = 0.1 +/- 0.003

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 3.43'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Sat Mar  3 16:25:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.888
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.15"
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src8.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src8.csv
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src8.csv
[Sat Mar  3 18:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Mar  3 18:30:05 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Mar  3 18:30:42 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.427520 pixels away
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:10:38 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Sun Mar  4 00:10:38 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.888
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.15"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src8.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src8.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src8.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Mar  4 02:08:44 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Mar  4 02:09:15 2012] Spatial fit model total counts = 1932.280000, observed total counts = 1937.000000
[Sun Mar  4 02:09:15 2012] Offset between fit and detection position for source 8 = 0.019933 pixels
[Sun Mar  4 02:09:15 2012] 1943.293000 total counts/ 614.673000 bgd. counts: snr = 53.589378
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.019933 pixels
  Position = (251.8, 290.0) = 0 43 10.62 41 14 50.9
  Extent = 5.2 (4.9-5.5)", rotation angle = 0
  Source counts = 1328.6 +/- 44.1
  Background counts = 614.7
  Rate = 0.07 +/- 0.002
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 13:31:50 2012] Counts = 1328.620000, rescaling region sizes by 2.000000
[Sun Mar  4 13:31:50 2012] XMMSAS src. selection expression = ellipse(21860.066520, 25184.278200, 620.817618, 620.817618, 0.000000, X, Y)
[Sun Mar  4 13:31:50 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src8_src.reg
[Sun Mar  4 13:31:50 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (216, 254) - (288, 326)
[Sun Mar  4 13:31:50 2012] XMMSAS bgd. selection expression = annulus(21860.066520, 25184.278200, 2069.392060, 4138.784119, X, Y) && !ellipse(25794.579860, 24602.495000, 1317.333638, 1317.333638, 0.000000, X, Y) && !ellipse(25393.807400, 26608.645800, 354.428010, 354.428010, 0.000000, X, Y) && !ellipse(26112.116000, 26112.116000, 1096.768032, 712.219220, 58.174000, X, Y) && !ellipse(24294.198600, 26659.449400, 325.437609, 325.437609, 0.000000, X, Y) && !ellipse(23548.413800, 25862.027000, 430.453612, 430.453612, 0.000000, X, Y) && !ellipse(23395.779600, 29049.003800, 354.820810, 354.820810, 0.000000, X, Y) && !ellipse(26690.095612, 26583.660797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24876.317657, 20325.416901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.346954, 28664.022278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16932.947906, 20205.537018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17954.195633, 29543.317535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.906097, 25943.804047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.580841, 22720.242706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25273.706512, 29629.664398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.241272, 28152.352997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.743195, 28393.015472, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 13:31:50 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src8.gif
[Sun Mar  4 13:41:54 2012] Mean detx,y = (4227.33, -4406.86) 
[Sun Mar  4 13:41:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:43:10 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:43:10 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Mar  4 13:43:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Mar  4 16:32:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:43 2012] Using photon index=1.80, rate=0.0684, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src8.arf
[Sun Mar  4 16:32:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:43 2012] Updating source flux to 9.3e-13