[Sat Mar  3 10:03:47 2012] Detection parameters:
  Position = (309.1, 297.0) = 0 42 48.51 41 15 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2377.0 +/- 60.3
  Background counts = 43.2
  Rate = 0.1 +/- 0.003

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 0.78'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Sat Mar  3 16:25:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.82"
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src7.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src7.csv
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src7.csv
[Sat Mar  3 18:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Mar  3 18:30:05 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Mar  3 18:30:42 2012] Spatial fit model total counts = 3908.520000, observed total counts = 3889.000000
[Sat Mar  3 18:30:42 2012] Offset between fit and detection position for source 7 = 0.095651 pixels
[Sat Mar  3 18:30:42 2012] 3954.450000 total counts/ 2568.910000 bgd. counts: snr = 27.336608
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.095651 pixels
  Position = (309.2, 296.9) = 0 42 48.49 41 15 20.8
  Extent = 5.1 (4.9-5.4)", rotation angle = 0
  Source counts = 1385.5 +/- 62.9
  Background counts = 2568.9
  Rate = 0.07 +/- 0.003
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:10:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 5.12"
[Sun Mar  4 00:10:38 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.066
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.12"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src7.ximg exists
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Mar  4 02:08:44 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src7 appears to have run properly
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Mar  4 02:08:44 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Mar  4 02:09:15 2012] Spatial fit model total counts = 3901.780000, observed total counts = 3889.000000
[Sun Mar  4 02:09:15 2012] Offset between fit and detection position for source 7 = 0.084708 pixels
[Sun Mar  4 02:09:15 2012] 3947.490000 total counts/ 2530.680000 bgd. counts: snr = 28.163913
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.084708 pixels
  Position = (309.3, 297.0) = 0 42 48.47 41 15 21.1
  Extent = 6.0" x 4.7", rotation angle = 126
  Source counts = 1416.8 +/- 62.8
  Background counts = 2530.7
  Rate = 0.07 +/- 0.003
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.28
[Sun Mar  4 02:09:15 2012] Source is confused with source 25
[Sun Mar  4 13:31:50 2012] Counts = 1416.810000, rescaling region sizes by 2.000000
[Sun Mar  4 13:31:50 2012] XMMSAS src. selection expression = ellipse(26856.849200, 25787.955000, 715.647621, 558.648016, 125.627600, X, Y)
[Sun Mar  4 13:31:50 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src7_src.reg
[Sun Mar  4 13:31:50 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (268, 256) - (350, 338)
[Sun Mar  4 13:31:50 2012] XMMSAS bgd. selection expression = annulus(26856.849200, 25787.955000, 2385.492069, 4770.984137, X, Y) && !ellipse(25794.579860, 24602.495000, 1317.333638, 1317.333638, 0.000000, X, Y) && !ellipse(29082.666720, 26618.647200, 413.780812, 413.780812, 0.000000, X, Y) && !ellipse(25947.503740, 30035.205800, 389.456811, 389.456811, 0.000000, X, Y) && !ellipse(27776.783200, 26713.960600, 444.004813, 444.004813, 0.000000, X, Y) && !ellipse(27389.390000, 26926.769800, 1140.784033, 593.342417, 27.439000, X, Y) && !ellipse(21860.066520, 25184.278200, 413.878412, 413.878412, 0.000000, X, Y) && !ellipse(25393.807400, 26608.645800, 354.428010, 354.428010, 0.000000, X, Y) && !ellipse(30755.187625, 26980.858514, 455.744548, 381.732918, 213.191382, X, Y) && !ellipse(30541.122000, 23233.216800, 415.100812, 415.100812, 0.000000, X, Y) && !ellipse(26112.116000, 26112.116000, 1096.768032, 712.219220, 58.174000, X, Y) && !ellipse(27676.191800, 21307.803200, 419.336012, 419.336012, 0.000000, X, Y) && !ellipse(24333.023800, 30539.569200, 377.702411, 377.702411, 0.000000, X, Y) && !ellipse(24294.198600, 26659.449400, 325.437609, 325.437609, 0.000000, X, Y) && !ellipse(31405.122200, 22201.334400, 417.373612, 353.191210, 344.491035, X, Y) && !ellipse(23548.413800, 25862.027000, 430.453612, 430.453612, 0.000000, X, Y) && !ellipse(23395.779600, 29049.003800, 354.820810, 354.820810, 0.000000, X, Y) && !ellipse(31907.355400, 30451.040200, 422.360012, 422.360012, 0.000000, X, Y) && !ellipse(26690.095612, 26583.660797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24876.317657, 20325.416901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28412.036102, 25867.124146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28257.322000, 25043.562000, 345.744810, 345.744810, 0.000000, X, Y) && !ellipse(28711.985800, 29849.556600, 324.339209, 324.339209, 0.000000, X, Y) && !ellipse(28608.562800, 23488.881800, 338.675210, 338.675210, 0.000000, X, Y) && !ellipse(26748.346954, 28664.022278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28868.459534, 24737.032166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.902000, 26756.504000, 1317.200038, 908.712026, -0.000000, X, Y) && !ellipse(27619.825806, 28125.815979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.992800, 29260.024000, 295.728809, 295.728809, 0.000000, X, Y) && !ellipse(24628.906097, 25943.804047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.580841, 22720.242706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.436000, 28648.182000, 1214.096035, 1214.096035, 0.000000, X, Y) && !ellipse(30747.871736, 30904.533600, 383.168811, 383.168811, 0.000000, X, Y) && !ellipse(25273.706512, 29629.664398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.241272, 28152.352997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.743195, 28393.015472, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 13:31:50 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src7.gif
[Sun Mar  4 13:41:31 2012] Mean detx,y = (337.99, -1213.46) 
[Sun Mar  4 13:41:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:41:50 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:41:50 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Mar  4 13:41:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Mar  4 16:32:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:43 2012] Using photon index=1.80, rate=0.073, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src7.arf
[Sun Mar  4 16:32:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:43 2012] Updating source flux to 7.9e-13
[Sun Mar  4 16:36:54 2012] Flag c found in src. 7 procflags, skipping spectral fitting