[Sat Mar  3 10:03:48 2012] Detection parameters:
  Position = (318.8, 328.7) = 0 42 44.79 41 17 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.5 +/- 17.4
  Background counts = 34.7
  Rate = 0.007 +/- 0.001

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 2.64'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sat Mar  3 16:25:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.201
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 7.75"
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src60.ximg exists
[Sat Mar  3 18:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src60.csv
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src60_1.ximg exists
[Sat Mar  3 18:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src60.csv
[Sat Mar  3 18:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sat Mar  3 18:30:05 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sat Mar  3 18:30:42 2012] Warning, spatial fit 60 centroid is now closest to src. 54
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:30:42 2012] Source is confused with source 54
[Sun Mar  4 00:10:38 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sun Mar  4 00:10:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.201
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 7.75"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src59.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src59.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src59.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:45 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun Mar  4 02:08:45 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun Mar  4 02:08:45 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sun Mar  4 02:09:15 2012] Spatial fit model total counts = 1330.470000, observed total counts = 1332.000000
[Sun Mar  4 02:09:15 2012] Offset between fit and detection position for source 67 = 1.584316 pixels
[Sun Mar  4 02:09:15 2012] Warning, changing simple spatial fit ID from 59 to 52
[Sun Mar  4 02:09:15 2012] 1213.076000 total counts/ 934.238000 bgd. counts: snr = 9.122696
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 1.584316 pixels
  Position = (317.7, 329.8) = 0 42 45.22 41 17 44.1
  Extent = 15.2 (15.2-15.2)", rotation angle = 0
  Source counts = 278.8 +/- 34.8
  Background counts = 934.2
  Rate = 0.01 +/- 0.002
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 13:31:52 2012] XMMSAS src. selection expression = ellipse(27588.436000, 28648.182000, 910.572026, 910.572026, 0.000000, X, Y)
[Sun Mar  4 13:31:52 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src67_src.reg
[Sun Mar  4 13:31:52 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (265, 278) - (370, 382)
[Sun Mar  4 13:31:52 2012] XMMSAS bgd. selection expression = annulus(27588.436000, 28648.182000, 1517.620044, 3035.240087, X, Y) && !ellipse(25794.579860, 24602.495000, 1317.333638, 1317.333638, 0.000000, X, Y) && !ellipse(29082.666720, 26618.647200, 413.780812, 413.780812, 0.000000, X, Y) && !ellipse(25947.503740, 30035.205800, 389.456811, 389.456811, 0.000000, X, Y) && !ellipse(27776.783200, 26713.960600, 444.004813, 444.004813, 0.000000, X, Y) && !ellipse(27389.390000, 26926.769800, 1140.784033, 593.342417, 27.439000, X, Y) && !ellipse(26856.849200, 25787.955000, 477.098414, 372.432011, 125.627600, X, Y) && !ellipse(25393.807400, 26608.645800, 354.428010, 354.428010, 0.000000, X, Y) && !ellipse(30755.187625, 26980.858514, 455.744548, 381.732918, 213.191382, X, Y) && !ellipse(26112.116000, 26112.116000, 1096.768032, 712.219220, 58.174000, X, Y) && !ellipse(24333.023800, 30539.569200, 377.702411, 377.702411, 0.000000, X, Y) && !ellipse(24294.198600, 26659.449400, 325.437609, 325.437609, 0.000000, X, Y) && !ellipse(26690.095612, 26583.660797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28412.036102, 25867.124146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.985800, 29849.556600, 324.339209, 324.339209, 0.000000, X, Y) && !ellipse(26748.346954, 28664.022278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29867.823181, 31563.569153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.902000, 26756.504000, 1317.200038, 908.712026, -0.000000, X, Y) && !ellipse(27619.825806, 28125.815979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.992800, 29260.024000, 295.728809, 295.728809, 0.000000, X, Y) && !ellipse(24628.906097, 25943.804047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30747.871736, 30904.533600, 383.168811, 383.168811, 0.000000, X, Y) && !ellipse(25273.706512, 29629.664398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.241272, 28152.352997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.743195, 28393.015472, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 13:31:52 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src67.gif
[Sun Mar  4 13:57:43 2012] Mean detx,y = (1184.71, 1358.86) 
[Sun Mar  4 13:57:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:57:56 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:57:56 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sun Mar  4 13:57:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sun Mar  4 16:32:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:44 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src67.arf
[Sun Mar  4 16:32:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:44 2012] Updating source flux to 1.4e-13
[Sun Mar  4 16:36:54 2012] Flag c found in src. 67 procflags, skipping spectral fitting