[Sat Mar  3 10:03:48 2012] Detection parameters:
  Position = (376.9, 272.1) = 0 42 22.37 41 13 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.2 +/- 20.0
  Background counts = 22.8
  Rate = 0.01 +/- 0.001

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 6.00'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Sat Mar  3 16:25:54 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.264
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 9.43"
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src47.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src47.csv
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src47.csv
[Sat Mar  3 18:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Mar  3 18:30:05 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sat Mar  3 18:30:42 2012] Warning, spatial fit 47 centroid is now closest to src. 32
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:30:42 2012] Source is confused with source 32
[Sun Mar  4 00:10:38 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Sun Mar  4 00:10:38 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.264
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 9.43"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src47.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src47.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src47.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:45 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun Mar  4 02:08:45 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun Mar  4 02:08:45 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sun Mar  4 02:09:15 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 11.311624 pixels away
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 13:31:52 2012] XMMSAS src. selection expression = ellipse(32744.263336, 23620.236572, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 13:31:52 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src49_src.reg
[Sun Mar  4 13:31:52 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (339, 235) - (414, 310)
[Sun Mar  4 13:31:52 2012] XMMSAS bgd. selection expression = annulus(32744.263336, 23620.236572, 1087.500000, 2175.000000, X, Y) && !ellipse(32606.776800, 26046.670800, 390.532811, 390.532811, 0.000000, X, Y) && !ellipse(33665.381800, 22235.478800, 435.872013, 435.872013, 0.000000, X, Y) && !ellipse(30541.122000, 23233.216800, 415.100812, 415.100812, 0.000000, X, Y) && !ellipse(33580.156000, 24177.019800, 366.445611, 366.445611, 0.000000, X, Y) && !ellipse(31405.122200, 22201.334400, 417.373612, 353.191210, 344.491035, X, Y) && !ellipse(32962.769592, 26470.020233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32116.519400, 23752.115000, 278.891208, 278.891208, 0.000000, X, Y) && !ellipse(32570.485940, 24304.803200, 299.123209, 299.123209, 0.000000, X, Y) && !ellipse(29481.902000, 26756.504000, 1317.200038, 908.712026, -0.000000, X, Y) && !ellipse(34395.787140, 22477.429657, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 13:31:52 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src49.gif
[Sun Mar  4 13:54:02 2012] Mean detx,y = (-5665.84, 78.74) 
[Sun Mar  4 13:54:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:54:21 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:54:21 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun Mar  4 13:54:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sun Mar  4 16:09:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 16:09:29 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun Mar  4 16:32:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:43 2012] Using photon index=1.80, rate=0.0143, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src49.arf
[Sun Mar  4 16:32:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:43 2012] Updating source flux to 1.8e-13
[Sun Mar  4 16:36:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting