[Sat Mar  3 10:03:47 2012] Detection parameters:
  Position = (375.5, 300.0) = 0 42 22.89 41 15 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5048.3 +/- 84.6
  Background counts = 25.7
  Rate = 0.3 +/- 0.005

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 5.59'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Sat Mar  3 16:25:54 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.092
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.22"
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src3.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src3.csv
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src3.csv
[Sat Mar  3 18:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Mar  3 18:30:05 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Mar  3 18:30:42 2012] Warning, spatial fit 3 centroid is now closest to src. 21
[Sat Mar  3 18:30:42 2012] Spatial fit model total counts = 4947.210000, observed total counts = 4809.000000
[Sat Mar  3 18:30:42 2012] Offset between fit and detection position for source 3 = 0.142518 pixels
[Sat Mar  3 18:30:42 2012] Warning, changing simple spatial fit ID from 3 to 28
[Sat Mar  3 18:30:42 2012] 4801.490000 total counts/ 1729.970000 bgd. counts: snr = 73.847205
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.142518 pixels
  Position = (375.4, 300.0) = 0 42 22.95 41 15 34.0
  Extent = 4.4 (4.3-4.5)", rotation angle = 0
  Source counts = 3071.5 +/- 69.3
  Background counts = 1730.0
  Rate = 0.2 +/- 0.004
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:30:42 2012] Source is confused with source 21
[Sun Mar  4 00:10:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 4.39"
[Sun Mar  4 00:10:38 2012] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.319
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.39"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src3.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src3.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar  4 02:08:44 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Mar  4 02:09:15 2012] Spatial fit model total counts = 5353.950000, observed total counts = 5272.000000
[Sun Mar  4 02:09:15 2012] Offset between fit and detection position for source 3 = 0.069675 pixels
[Sun Mar  4 02:09:15 2012] 5461.140000 total counts/ 2080.310000 bgd. counts: snr = 74.124078
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.069675 pixels
  Position = (375.3, 299.9) = 0 42 22.97 41 15 33.8
  Extent = 4.9 (4.8-5.1)", rotation angle = 0
  Source counts = 3380.8 +/- 73.9
  Background counts = 2080.3
  Rate = 0.2 +/- 0.004
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 13:31:50 2012] Counts = 3380.830000, rescaling region sizes by 2.000000
[Sun Mar  4 13:31:50 2012] XMMSAS src. selection expression = ellipse(32606.776800, 26046.670800, 585.799217, 585.799217, 0.000000, X, Y)
[Sun Mar  4 13:31:50 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar  4 13:31:50 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (342, 266) - (409, 334)
[Sun Mar  4 13:31:50 2012] XMMSAS bgd. selection expression = annulus(32606.776800, 26046.670800, 1952.664056, 3905.328112, X, Y) && !ellipse(29082.666720, 26618.647200, 413.780812, 413.780812, 0.000000, X, Y) && !ellipse(30755.187625, 26980.858514, 455.744548, 381.732918, 213.191382, X, Y) && !ellipse(34825.631073, 29598.874023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33665.381800, 22235.478800, 435.872013, 435.872013, 0.000000, X, Y) && !ellipse(30541.122000, 23233.216800, 415.100812, 415.100812, 0.000000, X, Y) && !ellipse(33580.156000, 24177.019800, 366.445611, 366.445611, 0.000000, X, Y) && !ellipse(31405.122200, 22201.334400, 417.373612, 353.191210, 344.491035, X, Y) && !ellipse(32962.769592, 26470.020233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35034.682000, 28907.456000, 307.396809, 307.396809, 0.000000, X, Y) && !ellipse(28412.036102, 25867.124146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32116.519400, 23752.115000, 278.891208, 278.891208, 0.000000, X, Y) && !ellipse(28711.985800, 29849.556600, 324.339209, 324.339209, 0.000000, X, Y) && !ellipse(28608.562800, 23488.881800, 338.675210, 338.675210, 0.000000, X, Y) && !ellipse(32570.485940, 24304.803200, 299.123209, 299.123209, 0.000000, X, Y) && !ellipse(28868.459534, 24737.032166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32744.263336, 23620.236572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.902000, 26756.504000, 1317.200038, 908.712026, -0.000000, X, Y) && !ellipse(34395.787140, 22477.429657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36066.010315, 29505.130249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34236.560400, 28184.450800, 306.351209, 306.351209, 0.000000, X, Y) && !ellipse(27588.436000, 28648.182000, 1214.096035, 1214.096035, 0.000000, X, Y) && !ellipse(36224.352000, 28106.768000, 1703.952049, 1703.952049, 0.000000, X, Y)
[Sun Mar  4 13:31:50 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src3.gif
[Sun Mar  4 13:35:09 2012] Mean detx,y = (-4396.38, 2070.42) 
[Sun Mar  4 13:35:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:35:37 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:35:37 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar  4 13:35:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar  4 16:32:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:43 2012] Using photon index=1.80, rate=0.174, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src3.arf
[Sun Mar  4 16:32:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:43 2012] Updating source flux to 2.3e-12
[Sun Mar  4 16:36:54 2012] Flag c found in src. 3 procflags, skipping spectral fitting