[Sat Mar  3 10:03:47 2012] Detection parameters:
  Position = (327.1, 297.9) = 0 42 41.57 41 15 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 431.7 +/- 29.4
  Background counts = 42.2
  Rate = 0.02 +/- 0.002

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 2.08'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Mar  3 16:25:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.47"
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src35.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src35.csv
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src35.csv
[Sat Mar  3 18:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat Mar  3 18:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Mar  3 18:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Mar  3 18:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:42 2012] Spatial fit model total counts = 1700.250000, observed total counts = 4340.000000
[Sat Mar  3 18:30:42 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:10:38 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sun Mar  4 00:10:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 7.47"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src35.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src35.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src35.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:09:15 2012] Source 26 is offset by 2.166346 and -3.153010 pixels which is larger than
2 X fitted extent = 1.245779 x 1.245779, not incorporating fit results
[Sun Mar  4 02:09:15 2012] Warning, spatial fit 35 centroid is now closest to src. 47
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 13:31:51 2012] XMMSAS src. selection expression = ellipse(28412.036102, 25867.124146, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 13:31:51 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src26_src.reg
[Sun Mar  4 13:31:51 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (290, 260) - (365, 335)
[Sun Mar  4 13:31:51 2012] XMMSAS bgd. selection expression = annulus(28412.036102, 25867.124146, 1087.500000, 2175.000000, X, Y) && !ellipse(25794.579860, 24602.495000, 1317.333638, 1317.333638, 0.000000, X, Y) && !ellipse(29082.666720, 26618.647200, 413.780812, 413.780812, 0.000000, X, Y) && !ellipse(27776.783200, 26713.960600, 444.004813, 444.004813, 0.000000, X, Y) && !ellipse(27389.390000, 26926.769800, 1140.784033, 593.342417, 27.439000, X, Y) && !ellipse(26856.849200, 25787.955000, 477.098414, 372.432011, 125.627600, X, Y) && !ellipse(30755.187625, 26980.858514, 455.744548, 381.732918, 213.191382, X, Y) && !ellipse(26112.116000, 26112.116000, 1096.768032, 712.219220, 58.174000, X, Y) && !ellipse(26690.095612, 26583.660797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28257.322000, 25043.562000, 345.744810, 345.744810, 0.000000, X, Y) && !ellipse(28608.562800, 23488.881800, 338.675210, 338.675210, 0.000000, X, Y) && !ellipse(26748.346954, 28664.022278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28868.459534, 24737.032166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.902000, 26756.504000, 1317.200038, 908.712026, -0.000000, X, Y) && !ellipse(27619.825806, 28125.815979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.436000, 28648.182000, 1214.096035, 1214.096035, 0.000000, X, Y) && !ellipse(25379.241272, 28152.352997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.743195, 28393.015472, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 13:31:51 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src26.gif
[Sun Mar  4 13:50:45 2012] Mean detx,y = (-927.72, -213.86) 
[Sun Mar  4 13:50:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:50:57 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:50:57 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Mar  4 13:50:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Mar  4 15:50:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 15:50:03 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Mar  4 16:32:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:43 2012] Using photon index=1.80, rate=0.0237, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src26.arf
[Sun Mar  4 16:32:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:43 2012] Updating source flux to 2.3e-13
[Sun Mar  4 16:36:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting