[Sat Mar  3 10:03:47 2012] Detection parameters:
  Position = (298.8, 301.1) = 0 42 52.49 41 15 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1231.1 +/- 45.2
  Background counts = 41.3
  Rate = 0.07 +/- 0.002

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 0.19'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 6.53 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Sat Mar  3 16:25:54 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 1.000
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 6.53"
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src15.ximg exists
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Mar  3 18:30:04 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src15 appears to have run properly
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Mar  3 18:30:05 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Mar  3 18:30:42 2012] Source 25 is offset by 5.823373 and -5.274187 pixels which is larger than
2 X fitted extent = 1.967168 x 1.967168, not incorporating fit results
[Sat Mar  3 18:30:42 2012] Spatial fit model total counts = 4774.230000, observed total counts = 4746.000000
[Sat Mar  3 18:30:42 2012] Offset between fit and detection position for source 25 = 1.894317 pixels
[Sat Mar  3 18:30:42 2012] Warning, changing simple spatial fit ID from 15 to 30
[Sat Mar  3 18:30:42 2012] 5067.043000 total counts/ 4301.690000 bgd. counts: snr = 11.669231
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.894317 pixels
  Position = (300.7, 301.4) = 0 42 51.77 41 15 40.2
  Extent = 8.7 (7.7-9.7)", rotation angle = 0
  Source counts = 765.4 +/- 71.2
  Background counts = 4301.7
  Rate = 0.04 +/- 0.004
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:10:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sun Mar  4 00:10:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.003
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.68"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src15.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src15.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src15.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Mar  4 02:08:44 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Mar  4 02:09:15 2012] Warning, spatial fit 15 centroid is now closest to src. 57
[Sun Mar  4 02:09:15 2012] Spatial fit model total counts = 4734.270000, observed total counts = 4746.000000
[Sun Mar  4 02:09:15 2012] Offset between fit and detection position for source 25 = 0.661310 pixels
[Sun Mar  4 02:09:15 2012] Warning, changing simple spatial fit ID from 15 to 30
[Sun Mar  4 02:09:15 2012] 5126.174000 total counts/ 4162.330000 bgd. counts: snr = 14.939584
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.661310 pixels
  Position = (300.7, 300.7) = 0 42 51.77 41 15 37.3
  Extent = 13.7 (13.7-27.4)" x 8.9 (8.2-9.8)", rotation angle = 58 (50-70) degrees
  Source counts = 963.8 +/- 71.6
  Background counts = 4162.3
  Rate = 0.05 +/- 0.004
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.39
[Sun Mar  4 02:09:15 2012] Source is confused with source 7
[Sun Mar  4 13:31:51 2012] XMMSAS src. selection expression = ellipse(26112.116000, 26112.116000, 822.576024, 534.164415, 58.174000, X, Y)
[Sun Mar  4 13:31:51 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src25_src.reg
[Sun Mar  4 13:31:51 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (253, 253) - (348, 348)
[Sun Mar  4 13:31:51 2012] XMMSAS bgd. selection expression = annulus(26112.116000, 26112.116000, 1370.960039, 2741.920079, X, Y) && !ellipse(25794.579860, 24602.495000, 1317.333638, 1317.333638, 0.000000, X, Y) && !ellipse(29082.666720, 26618.647200, 413.780812, 413.780812, 0.000000, X, Y) && !ellipse(27776.783200, 26713.960600, 444.004813, 444.004813, 0.000000, X, Y) && !ellipse(27389.390000, 26926.769800, 1140.784033, 593.342417, 27.439000, X, Y) && !ellipse(26856.849200, 25787.955000, 477.098414, 372.432011, 125.627600, X, Y) && !ellipse(25393.807400, 26608.645800, 354.428010, 354.428010, 0.000000, X, Y) && !ellipse(24294.198600, 26659.449400, 325.437609, 325.437609, 0.000000, X, Y) && !ellipse(23548.413800, 25862.027000, 430.453612, 430.453612, 0.000000, X, Y) && !ellipse(23395.779600, 29049.003800, 354.820810, 354.820810, 0.000000, X, Y) && !ellipse(26690.095612, 26583.660797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28412.036102, 25867.124146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28257.322000, 25043.562000, 345.744810, 345.744810, 0.000000, X, Y) && !ellipse(28608.562800, 23488.881800, 338.675210, 338.675210, 0.000000, X, Y) && !ellipse(26748.346954, 28664.022278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28868.459534, 24737.032166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.902000, 26756.504000, 1317.200038, 908.712026, -0.000000, X, Y) && !ellipse(27619.825806, 28125.815979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.906097, 25943.804047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.436000, 28648.182000, 1214.096035, 1214.096035, 0.000000, X, Y) && !ellipse(25273.706512, 29629.664398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.241272, 28152.352997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26019.743195, 28393.015472, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 13:31:51 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src25.gif
[Sun Mar  4 13:46:02 2012] Mean detx,y = (1159.24, -1320.84) 
[Sun Mar  4 13:46:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:46:13 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:46:13 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Mar  4 13:46:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Mar  4 16:32:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:43 2012] Using photon index=1.80, rate=0.0496, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src25.arf
[Sun Mar  4 16:32:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:43 2012] Updating source flux to 5.9e-13
[Sun Mar  4 16:36:54 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Sun Mar  4 16:36:54 2012] Flag c found in src. 25 procflags, skipping spectral fitting