[Sat Mar  3 10:03:47 2012] Detection parameters:
  Position = (367.5, 350.7) = 0 42 25.99 41 19 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 450.2 +/- 26.5
  Background counts = 21.2
  Rate = 0.03 +/- 0.002

[Sat Mar  3 10:03:49 2012] Off-axis axis estimate = 6.28'
[Sat Mar  3 16:25:54 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:25:54 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Sat Mar  3 16:25:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Sat Mar  3 16:25:54 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.57"
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src29.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src29.csv
[Sat Mar  3 18:30:04 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Mar  3 18:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src29.csv
[Sat Mar  3 18:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Mar  3 18:30:05 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Mar  3 18:30:05 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Mar  3 18:30:42 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.069878 pixels away
[Sat Mar  3 18:30:42 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:42 2012] Assessing source extent using major
[Sat Mar  3 18:30:42 2012] Source does appear to be extended
[Sat Mar  3 18:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:10:38 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 00:10:38 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Sun Mar  4 00:10:38 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Sun Mar  4 00:10:38 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 9.57"
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src29.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src29.csv
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Mar  4 02:08:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src29.csv
[Sun Mar  4 02:08:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Mar  4 02:08:44 2012] fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Mar  4 02:08:44 2012] Fit fullrun_mos2_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Mar  4 02:09:15 2012] Spatial fit model total counts = 558.168000, observed total counts = 549.000000
[Sun Mar  4 02:09:15 2012] Offset between fit and detection position for source 13 = 0.222925 pixels
[Sun Mar  4 02:09:15 2012] 554.434000 total counts/ 232.759000 bgd. counts: snr = 21.084537
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.222925 pixels
  Position = (367.3, 350.6) = 0 42 26.05 41 19 14.1
  Extent = 5.3 (4.8-5.9)", rotation angle = 0
  Source counts = 321.7 +/- 23.5
  Background counts = 232.8
  Rate = 0.02 +/- 0.001
[Sun Mar  4 02:09:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:15 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:09:15 2012] Source does appear to be extended
[Sun Mar  4 02:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 13:31:51 2012] XMMSAS src. selection expression = ellipse(31907.355400, 30451.040200, 316.770009, 316.770009, 0.000000, X, Y)
[Sun Mar  4 13:31:51 2012] Writing source region out to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src13_src.reg
[Sun Mar  4 13:31:51 2012] Extracting stamp from image fullrun_mos2_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (349, 332) - (386, 369)
[Sun Mar  4 13:31:51 2012] XMMSAS bgd. selection expression = annulus(31907.355400, 30451.040200, 527.950015, 1055.900030, X, Y) && !ellipse(30747.871736, 30904.533600, 383.168811, 383.168811, 0.000000, X, Y)
[Sun Mar  4 13:31:51 2012] Writing fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src13.gif
[Sun Mar  4 13:49:19 2012] Mean detx,y = (-1457.31, 5401.32) 
[Sun Mar  4 13:49:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 13:49:29 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 13:49:29 2012] Setting source spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Mar  4 13:49:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Mar  4 16:32:42 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:42 2012] Error reading totcts from fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Mar  4 16:32:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:43 2012] Using photon index=1.80, rate=0.0166, arf fullrun_mos2_xmm0600660501_pi300-10000_pass1_cl_src13.arf
[Sun Mar  4 16:32:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:43 2012] Updating source flux to 2.7e-13