[Sat Mar  3 10:03:46 2012] Detection parameters:
  Position = (257.2, 262.0) = 0 43 8.55 41 12 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.6 +/- 13.9
  Background counts = 19.6
  Rate = 0.008 +/- 0.001

[Sat Mar  3 10:03:46 2012] Off-axis axis estimate = 3.99'
[Sat Mar  3 13:26:04 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 13:26:04 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Sat Mar  3 13:26:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842
[Sat Mar  3 13:26:04 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.42"
[Sat Mar  3 16:25:53 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src53.ximg exists
[Sat Mar  3 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src53.csv
[Sat Mar  3 16:25:53 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat Mar  3 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src53.csv
[Sat Mar  3 16:25:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 16:25:54 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat Mar  3 16:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Mar  3 16:25:54 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat Mar  3 16:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Mar  3 16:25:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 18:30:32 2012] Source 86 is offset by -6.091807 and -6.764615 pixels which is larger than
2 X fitted extent = 0.968331 x 0.968331, not incorporating fit results
[Sat Mar  3 18:30:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:32 2012] Assessing source extent using major
[Sat Mar  3 18:30:32 2012] Source does appear to be extended
[Sat Mar  3 18:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 21:39:38 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 21:39:38 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Sat Mar  3 21:39:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842
[Sat Mar  3 21:39:38 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 8.42"
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src52.ximg exists
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src52_1.ximg exists
[Sun Mar  4 00:10:37 2012] Fit fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src52 appears to have run properly
[Sun Mar  4 00:10:38 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sun Mar  4 00:10:38 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sun Mar  4 00:10:38 2012] Fit fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sun Mar  4 02:09:07 2012] Spatial fit model total counts = 284.543000, observed total counts = 266.000000
[Sun Mar  4 02:09:07 2012] Offset between fit and detection position for source 86 = 0.073275 pixels
[Sun Mar  4 02:09:07 2012] 287.808500 total counts/ 205.507000 bgd. counts: snr = 5.741091
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 0.073275 pixels
  Position = (257.2, 261.9) = 0 43 8.55 41 12 48.6
  Extent = 5.2 (4.2-7.0)", rotation angle = 0
  Source counts = 82.3 +/- 17.0
  Background counts = 205.5
  Rate = 0.004 +/- 0.0009
[Sun Mar  4 02:09:07 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:07 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:09:07 2012] Source does appear to be extended
[Sun Mar  4 02:09:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 10:46:23 2012] XMMSAS src. selection expression = ellipse(22324.987000, 22738.724800, 313.557009, 313.557009, 0.000000, X, Y)
[Sun Mar  4 10:46:23 2012] Writing source region out to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src86_src.reg
[Sun Mar  4 10:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (239, 244) - (275, 280)
[Sun Mar  4 10:46:23 2012] XMMSAS bgd. selection expression = annulus(22324.987000, 22738.724800, 522.595015, 1045.190030, X, Y)
[Sun Mar  4 10:46:23 2012] Writing fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src86.gif
[Sun Mar  4 11:08:03 2012] Mean detx,y = (-5996.32, -2730.38) 
[Sun Mar  4 11:08:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 11:08:12 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 11:08:13 2012] Setting source spectrum file to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sun Mar  4 11:08:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Sun Mar  4 13:14:05 2012] Not generating rmf since there are only 82 counts
[Sun Mar  4 13:14:05 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:40 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:40 2012] Error reading totcts from fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sun Mar  4 16:32:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:41 2012] Using photon index=1.80, rate=0.00424, arf fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src86.arf
[Sun Mar  4 16:32:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:41 2012] Updating source flux to 7.1e-14
[Sun Mar  4 16:32:47 2012] Flag b found in src. 86 procflags, skipping spectral fitting
[Sun Mar  4 16:32:47 2012] Source 86 has fewer than 100.000000 counts, skipping spectral fitting