[Sat Mar  3 10:03:44 2012] Detection parameters:
  Position = (313.0, 311.0) = 0 42 47.01 41 16 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2659.1 +/- 63.7
  Background counts = 44.5
  Rate = 0.1 +/- 0.003

[Sat Mar  3 10:03:46 2012] Off-axis axis estimate = 1.40'
[Sat Mar  3 13:26:04 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 13:26:04 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Mar  3 13:26:04 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Sat Mar  3 13:26:04 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.13"
[Sat Mar  3 16:25:53 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Mar  3 16:25:53 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Mar  3 16:25:53 2012] Fit fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src5 appears to have run properly
[Sat Mar  3 16:25:54 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Mar  3 16:25:54 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Mar  3 16:25:54 2012] Fit fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Mar  3 18:30:32 2012] Spatial fit model total counts = 6171.210000, observed total counts = 6149.000000
[Sat Mar  3 18:30:32 2012] Offset between fit and detection position for source 4 = 0.494136 pixels
[Sat Mar  3 18:30:32 2012] 6003.090000 total counts/ 4855.090000 bgd. counts: snr = 16.475676
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.494136 pixels
  Position = (312.8, 311.5) = 0 42 47.12 41 16 24.2
  Extent = 5.7 (5.4-6.2)", rotation angle = 0
  Source counts = 1148.0 +/- 77.5
  Background counts = 4855.1
  Rate = 0.06 +/- 0.004
[Sat Mar  3 18:30:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:32 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 18:30:32 2012] Source does appear to be extended
[Sat Mar  3 18:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 21:39:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 21:39:38 2012] Initial guess for spatial extent in simple fitting = 5.69"
[Sat Mar  3 21:39:38 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.917
[Sat Mar  3 21:39:38 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.69"
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Mar  4 00:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src5.csv
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Mar  4 00:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src5.csv
[Sun Mar  4 00:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Mar  4 00:10:37 2012] Fit fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Mar  4 02:09:07 2012] Spatial fit model total counts = 5658.940000, observed total counts = 5559.000000
[Sun Mar  4 02:09:07 2012] Offset between fit and detection position for source 4 = 0.173121 pixels
[Sun Mar  4 02:09:07 2012] 5598.090000 total counts/ 4366.620000 bgd. counts: snr = 18.635933
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.173121 pixels
  Position = (312.8, 311.3) = 0 42 47.09 41 16 23.5
  Extent = 6.1 (5.7-6.4)", rotation angle = 0
  Source counts = 1231.5 +/- 74.8
  Background counts = 4366.6
  Rate = 0.06 +/- 0.004
[Sun Mar  4 02:09:07 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:07 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 02:09:07 2012] Source does appear to be extended
[Sun Mar  4 02:09:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 10:46:21 2012] Counts = 1231.470000, rescaling region sizes by 2.000000
[Sun Mar  4 10:46:21 2012] XMMSAS src. selection expression = ellipse(27167.672400, 27035.272400, 731.414421, 731.414421, 0.000000, X, Y)
[Sun Mar  4 10:46:21 2012] Writing source region out to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src4_src.reg
[Sun Mar  4 10:46:21 2012] Extracting stamp from image fullrun_mos1_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (271, 269) - (355, 353)
[Sun Mar  4 10:46:21 2012] XMMSAS bgd. selection expression = annulus(27167.672400, 27035.272400, 2438.048070, 4876.096140, X, Y) && !ellipse(25795.953600, 24599.533400, 1324.600838, 1324.600838, 0.000000, X, Y) && !ellipse(29087.797260, 26613.584800, 437.644813, 422.667212, 229.134000, X, Y) && !ellipse(25952.549360, 30035.375000, 383.844811, 383.844811, 0.000000, X, Y) && !ellipse(27725.562000, 26763.348000, 651.961619, 651.961619, 0.000000, X, Y) && !ellipse(21862.764714, 25180.132008, 456.823745, 397.438134, 65.916017, X, Y) && !ellipse(26851.075840, 25781.171800, 463.567213, 399.078411, 117.395700, X, Y) && !ellipse(25442.470000, 26609.476000, 378.593611, 311.994409, 0.000000, X, Y) && !ellipse(30769.256940, 26982.859200, 397.546411, 342.209610, 359.577728, X, Y) && !ellipse(25957.461790, 26144.530503, 305.359696, 273.009210, 211.799267, X, Y) && !ellipse(30540.846558, 23313.285980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24332.358400, 30539.192400, 358.879210, 358.879210, 0.000000, X, Y) && !ellipse(28163.982025, 26328.411591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24288.731080, 26663.920277, 360.471672, 306.049298, 88.933888, X, Y) && !ellipse(31399.390800, 22197.260200, 383.658411, 383.658411, 0.000000, X, Y) && !ellipse(23399.011400, 29042.895200, 433.784812, 372.003211, 331.047164, X, Y) && !ellipse(23563.767800, 25851.687200, 473.212814, 330.712010, 61.331332, X, Y) && !ellipse(31925.598328, 30429.178680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.198975, 26574.901855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30141.769104, 26853.209991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28726.495600, 29850.949600, 347.293610, 347.293610, 0.000000, X, Y) && !ellipse(28235.842420, 25052.024400, 324.308809, 253.709607, 90.000000, X, Y) && !ellipse(28619.004000, 23484.658800, 376.849384, 376.849384, 0.000000, X, Y) && !ellipse(32113.399800, 23758.838200, 304.124809, 304.124809, 0.000000, X, Y) && !ellipse(26675.468300, 28577.650540, 363.615210, 363.615210, 0.000000, X, Y) && !ellipse(29865.497020, 31457.798600, 379.712811, 379.712811, 0.000000, X, Y) && !ellipse(25982.299316, 27520.580811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.078857, 28132.320801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22324.987000, 22738.724800, 418.076012, 418.076012, 0.000000, X, Y) && !ellipse(24635.177277, 25887.618317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25332.220703, 29710.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.589264, 32656.950043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.748000, 24708.458000, 1062.872031, 1062.872031, 0.000000, X, Y) && !ellipse(23320.064270, 26645.207031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26403.068359, 27775.163605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30232.552521, 27530.890289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28492.852000, 27497.044000, 1284.912037, 1284.912037, 0.000000, X, Y)
[Sun Mar  4 10:46:21 2012] Writing fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src4.gif
[Sun Mar  4 10:50:22 2012] Mean detx,y = (205.78, -731.08) 
[Sun Mar  4 10:50:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 10:50:42 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 10:50:42 2012] Setting source spectrum file to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar  4 10:50:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Mar  4 16:32:39 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:39 2012] Error reading totcts from fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar  4 16:32:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:40 2012] Using photon index=1.80, rate=0.0634, arf fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src4.arf
[Sun Mar  4 16:32:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:40 2012] Updating source flux to 6.2e-13