[Sat Mar  3 10:03:44 2012] Detection parameters:
  Position = (401.0, 340.3) = 0 42 13.04 41 18 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 739.1 +/- 33.2
  Background counts = 20.0
  Rate = 0.06 +/- 0.003

[Sat Mar  3 10:03:46 2012] Off-axis axis estimate = 8.03'
[Sat Mar  3 13:26:04 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 13:26:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 13:26:04 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sat Mar  3 13:26:04 2012] source mask rpix=2.4, npix_max = 33, mask sum = 31, frac = 0.921
[Sat Mar  3 13:26:04 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.44"
[Sat Mar  3 16:25:53 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src15.ximg exists
[Sat Mar  3 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src15.csv
[Sat Mar  3 16:25:53 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Mar  3 16:25:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src15.csv
[Sat Mar  3 16:25:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 16:25:54 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Mar  3 16:25:54 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Mar  3 16:25:54 2012] Fit fullrun_mos1_xmm0600660501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Mar  3 18:30:32 2012] Warning, spatial fit 15 centroid is now closest to src. 18
[Sat Mar  3 18:30:32 2012] Source 19 is offset by 7.597199 and -3.340546 pixels which is larger than
2 X fitted extent = 1.199752 x 1.199752, not incorporating fit results
[Sat Mar  3 18:30:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 18:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 18:30:32 2012] Assessing source extent using major
[Sat Mar  3 18:30:32 2012] Source does appear to be extended
[Sat Mar  3 18:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 21:39:38 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 21:39:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 21:39:38 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sat Mar  3 21:39:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 31, frac = 0.921
[Sat Mar  3 21:39:38 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.44"
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src15.ximg exists
[Sun Mar  4 00:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src15.csv
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Mar  4 00:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src15.csv
[Sun Mar  4 00:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Mar  4 00:10:37 2012] fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Mar  4 00:10:37 2012] Fit fullrun_mos1_xmm0600660501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Mar  4 02:09:07 2012] Warning, spatial fit 15 centroid is now closest to src. 18
[Sun Mar  4 02:09:07 2012] Spatial fit model total counts = 1073.920000, observed total counts = 958.000000
[Sun Mar  4 02:09:07 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar  4 02:09:07 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 02:09:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 02:09:07 2012] Assessing source extent using major
[Sun Mar  4 02:09:07 2012] Source does appear to be extended
[Sun Mar  4 02:09:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 10:46:21 2012] XMMSAS src. selection expression = ellipse(34838.428314, 29553.900482, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 10:46:21 2012] Writing source region out to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src19_src.reg
[Sun Mar  4 10:46:21 2012] Extracting stamp from image fullrun_mos1_xmm0600660501_pi300-10000_cl_sm2.00.img.gz, (363, 303) - (438, 378)
[Sun Mar  4 10:46:22 2012] XMMSAS bgd. selection expression = annulus(34838.428314, 29553.900482, 1087.500000, 2175.000000, X, Y) && !ellipse(36075.653381, 29353.796234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31925.598328, 30429.178680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35057.539917, 28917.383759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35742.927765, 32393.868500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35660.951080, 28676.407990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34308.540222, 32003.812836, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 10:46:22 2012] Writing fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src19.gif
[Sun Mar  4 10:56:27 2012] Mean detx,y = (6390.85, 4278.32) 
[Sun Mar  4 10:56:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 10:56:46 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 10:56:46 2012] Setting source spectrum file to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Mar  4 10:56:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Mar  4 12:08:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar  4 12:08:43 2012] rmf not generated due to insufficient counts
[Sun Mar  4 16:32:39 2012] Updating aperture counts using extracted products
[Sun Mar  4 16:32:39 2012] Error reading totcts from fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Mar  4 16:32:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 16:32:41 2012] Using photon index=1.80, rate=0.0635, arf fullrun_mos1_xmm0600660501_pi300-10000_pass1_cl_src19.arf
[Sun Mar  4 16:32:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 16:32:41 2012] Updating source flux to 9.9e-13
[Sun Mar  4 16:32:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting