[Sun Feb  5 10:17:58 2012] Detection parameters:
  Position = (308.4, 437.1) = 0 42 48.41 41 25 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1456.3 +/- 45.9
  Background counts = 41.1
  Rate = 0.1 +/- 0.003

[Sun Feb  5 10:18:02 2012] Off-axis axis estimate = 10.08'
[Sun Feb  5 10:20:29 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:20:29 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Sun Feb  5 10:20:29 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.067
[Sun Feb  5 10:20:29 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.47"
[Sun Feb  5 16:44:12 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src8.ximg exists
[Sun Feb  5 16:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src8.csv
[Sun Feb  5 16:44:12 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Feb  5 16:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src8.csv
[Sun Feb  5 16:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:44:14 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Feb  5 16:44:14 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Feb  5 16:44:14 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Feb  5 23:22:16 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.289548 pixels away
[Sun Feb  5 23:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:17 2012] Assessing source extent using major
[Sun Feb  5 23:22:17 2012] Source does appear to be extended
[Sun Feb  5 23:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 23:22:57 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 23:22:57 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Sun Feb  5 23:22:57 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.067
[Sun Feb  5 23:22:57 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.47"
[Mon Feb  6 03:58:37 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src8.ximg exists
[Mon Feb  6 03:58:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src8.csv
[Mon Feb  6 03:58:37 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Feb  6 03:58:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src8.csv
[Mon Feb  6 03:58:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 03:58:39 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Feb  6 03:58:39 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Feb  6 03:58:39 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Feb  6 08:41:12 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.043490 pixels away
[Mon Feb  6 08:41:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:13 2012] Assessing source extent using major
[Mon Feb  6 08:41:13 2012] Source does appear to be extended
[Mon Feb  6 08:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 08:41:50 2012] Counts = 1456.257690, rescaling region sizes by 2.000000
[Mon Feb  6 08:41:50 2012] XMMSAS src. selection expression = ellipse(26783.860626, 37978.358887, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Feb  6 08:41:50 2012] Writing source region out to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src8_src.reg
[Mon Feb  6 08:41:50 2012] Extracting stamp from image fullrun_pn_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (233, 362) - (383, 512)
[Mon Feb  6 08:41:50 2012] XMMSAS bgd. selection expression = annulus(26783.860626, 37978.358887, 4350.000000, 8700.000000, X, Y) && !ellipse(23745.986725, 43839.253754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31069.559840, 42426.583800, 394.067155, 394.067155, 0.000000, X, Y) && !ellipse(31849.722900, 38552.612518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.340469, 38641.705326, 743.384021, 435.182711, 14.661727, X, Y) && !ellipse(23425.390427, 33167.986155, 626.162265, 414.396131, 331.814596, X, Y) && !ellipse(19970.660400, 31944.489800, 350.153610, 350.153610, 0.000000, X, Y) && !ellipse(29763.374040, 31645.836383, 500.726852, 450.307304, 2.334503, X, Y) && !ellipse(30671.768020, 31105.876600, 375.020011, 375.020011, 0.000000, X, Y) && !ellipse(31817.814200, 30632.446600, 462.565613, 462.565613, 0.000000, X, Y) && !ellipse(25565.638000, 30140.881600, 1296.432037, 380.956811, 315.977000, X, Y) && !ellipse(24254.598600, 30719.581000, 455.007213, 455.007213, 0.000000, X, Y) && !ellipse(23810.750854, 30136.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.109600, 30040.447400, 448.803213, 448.803213, 0.000000, X, Y) && !ellipse(25242.823212, 29876.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34732.480000, 29883.614000, 465.436813, 465.436813, 0.000000, X, Y) && !ellipse(17883.140780, 29759.569800, 483.072014, 483.072014, 0.000000, X, Y) && !ellipse(26654.296000, 29436.026000, 342.804810, 342.804810, 0.000000, X, Y) && !ellipse(23312.657600, 29240.558000, 447.272013, 447.272013, 0.000000, X, Y) && !ellipse(34957.857000, 29115.026200, 301.648009, 301.648009, 0.000000, X, Y) && !ellipse(35569.387085, 28856.533142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27572.852800, 28561.134200, 891.736026, 891.736026, 0.000000, X, Y) && !ellipse(26000.172974, 44916.773499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33109.666160, 39610.971120, 793.688823, 513.909615, 359.927000, X, Y) && !ellipse(32200.731049, 36390.954041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28298.679626, 32793.976105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35659.908000, 32515.768000, 427.021612, 427.021612, 0.000000, X, Y) && !ellipse(34172.028200, 32175.746200, 407.116812, 407.116812, 0.000000, X, Y) && !ellipse(35081.114000, 31633.760000, 1708.088049, 1708.088049, 0.000000, X, Y) && !ellipse(27305.542023, 29353.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.370000, 28616.812000, 1307.376038, 1307.376038, 0.000000, X, Y) && !ellipse(34256.358276, 29113.359436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19449.609820, 28976.620800, 458.099213, 458.099213, 0.000000, X, Y) && !ellipse(28710.198000, 28839.226000, 705.511220, 705.511220, 0.000000, X, Y) && !ellipse(24855.822800, 28805.486400, 950.376027, 950.376027, 0.000000, X, Y)
[Mon Feb  6 08:41:50 2012] Writing fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src8.gif
[Mon Feb  6 08:51:57 2012] Mean detx,y = (-5595.93, -9734.66) 
[Mon Feb  6 08:51:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 08:53:51 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 08:53:51 2012] Setting source spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Feb  6 08:53:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Feb  6 10:42:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb  6 10:42:02 2012] rmf not generated due to insufficient counts
[Mon Feb  6 21:37:35 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:35 2012] Error reading totcts from fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Feb  6 21:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:35 2012] Using photon index=1.80, rate=0.095, arf fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src8.arf
[Mon Feb  6 21:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:35 2012] Updating source flux to 4.6e-13
[Mon Feb  6 21:44:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting