[Sun Feb  5 10:17:59 2012] Detection parameters:
  Position = (250.8, 292.1) = 0 43 10.62 41 14 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4214.5 +/- 78.6
  Background counts = 66.2
  Rate = 0.4 +/- 0.008

[Sun Feb  5 10:18:02 2012] Off-axis axis estimate = 3.48'
[Sun Feb  5 10:20:29 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:20:29 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Sun Feb  5 10:20:29 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.884
[Sun Feb  5 10:20:29 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.17"
[Sun Feb  5 16:44:13 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src47.ximg exists
[Sun Feb  5 16:44:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src47.csv
[Sun Feb  5 16:44:13 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun Feb  5 16:44:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src47.csv
[Sun Feb  5 16:44:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:44:15 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun Feb  5 16:44:15 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Feb  5 16:44:15 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Feb  5 23:22:17 2012] Spatial fit model total counts = 4058.000000, observed total counts = 4058.000000
[Sun Feb  5 23:22:17 2012] Offset between fit and detection position for source 49 = 0.060559 pixels
[Sun Feb  5 23:22:17 2012] 4064.050000 total counts/ 1240.110000 bgd. counts: snr = 80.190950
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.060559 pixels
  Position = (250.8, 292.1) = 0 43 10.63 41 14 50.5
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source counts = 2823.9 +/- 63.7
  Background counts = 1240.1
  Rate = 0.2 +/- 0.004
[Sun Feb  5 23:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:17 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:17 2012] Source does appear to be extended
[Sun Feb  5 23:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 23:22:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 23:22:57 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Sun Feb  5 23:22:57 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.229
[Sun Feb  5 23:22:57 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 5.67"
[Mon Feb  6 03:58:38 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src47.ximg exists
[Mon Feb  6 03:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src47.csv
[Mon Feb  6 03:58:38 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon Feb  6 03:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src47.csv
[Mon Feb  6 03:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 03:58:40 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon Feb  6 03:58:40 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Feb  6 03:58:40 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Mon Feb  6 08:41:12 2012] Spatial fit model total counts = 4063.000000, observed total counts = 4063.000000
[Mon Feb  6 08:41:12 2012] Offset between fit and detection position for source 49 = 0.012252 pixels
[Mon Feb  6 08:41:12 2012] 4082.200000 total counts/ 1286.990000 bgd. counts: snr = 77.916037
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.012252 pixels
  Position = (250.8, 292.1) = 0 43 10.64 41 14 50.5
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2795.2 +/- 63.9
  Background counts = 1287.0
  Rate = 0.2 +/- 0.005
[Mon Feb  6 08:41:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:13 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:13 2012] Source does appear to be extended
[Mon Feb  6 08:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 08:41:52 2012] Counts = 2795.210000, rescaling region sizes by 2.000000
[Mon Feb  6 08:41:52 2012] XMMSAS src. selection expression = ellipse(21772.412800, 25365.925400, 671.760019, 671.760019, 0.000000, X, Y)
[Mon Feb  6 08:41:52 2012] Writing source region out to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src49_src.reg
[Mon Feb  6 08:41:52 2012] Extracting stamp from image fullrun_pn_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (212, 254) - (289, 331)
[Mon Feb  6 08:41:52 2012] XMMSAS bgd. selection expression = annulus(21772.412800, 25365.925400, 2239.200064, 4478.400129, X, Y) && !ellipse(25716.303520, 24797.984400, 1413.002441, 1413.002441, 0.000000, X, Y) && !ellipse(25565.638000, 30140.881600, 1296.432037, 380.956811, 315.977000, X, Y) && !ellipse(23810.750854, 30136.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25242.823212, 29876.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17883.140780, 29759.569800, 483.072014, 483.072014, 0.000000, X, Y) && !ellipse(23312.657600, 29240.558000, 447.272013, 447.272013, 0.000000, X, Y) && !ellipse(26620.979437, 28770.987340, 468.596211, 332.257444, 13.757322, X, Y) && !ellipse(25930.628600, 27696.742860, 426.037612, 426.037612, 0.000000, X, Y) && !ellipse(26606.366608, 26749.183289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.512000, 26791.092000, 307.885609, 307.885609, 0.000000, X, Y) && !ellipse(24213.566589, 26845.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.122000, 26337.718000, 598.574417, 331.033610, 359.947000, X, Y) && !ellipse(24595.378387, 26253.024689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.824000, 25936.305200, 1149.352033, 651.948819, 90.000000, X, Y) && !ellipse(23474.147200, 26064.888800, 488.512814, 488.512814, 0.000000, X, Y) && !ellipse(22205.378400, 22904.437340, 356.572810, 356.572810, 0.000000, X, Y) && !ellipse(24635.804200, 20831.982800, 430.078412, 430.078412, 0.000000, X, Y) && !ellipse(16831.888199, 20386.793213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19449.609820, 28976.620800, 458.099213, 458.099213, 0.000000, X, Y) && !ellipse(24855.822800, 28805.486400, 950.376027, 950.376027, 0.000000, X, Y) && !ellipse(25295.700775, 27645.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26943.204865, 24568.735168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.040600, 23483.778200, 574.140817, 574.140817, 0.000000, X, Y) && !ellipse(26002.703217, 23272.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.265503, 22739.358917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24157.877350, 21607.391159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23585.579800, 20476.596000, 1550.672045, 341.836810, 121.692000, X, Y)
[Mon Feb  6 08:41:52 2012] Writing fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src49.gif
[Mon Feb  6 09:25:53 2012] Mean detx,y = (-4541.12, 3788.65) 
[Mon Feb  6 09:25:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 09:26:34 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 09:26:34 2012] Setting source spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Feb  6 09:26:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Mon Feb  6 21:37:35 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:35 2012] Error reading totcts from fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Feb  6 21:37:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:36 2012] Using photon index=1.80, rate=0.197, arf fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src49.arf
[Mon Feb  6 21:37:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:36 2012] Updating source flux to 6.7e-13