[Sun Feb  5 10:17:59 2012] Detection parameters:
  Position = (308.4, 299.2) = 0 42 48.43 41 15 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6053.7 +/- 95.0
  Background counts = 112.3
  Rate = 0.5 +/- 0.007

[Sun Feb  5 10:18:02 2012] Off-axis axis estimate = 0.72'
[Sun Feb  5 10:20:29 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:20:29 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Sun Feb  5 10:20:29 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942
[Sun Feb  5 10:20:29 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 6.79"
[Sun Feb  5 16:44:13 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src43.ximg exists
[Sun Feb  5 16:44:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src43.csv
[Sun Feb  5 16:44:13 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Feb  5 16:44:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src43.csv
[Sun Feb  5 16:44:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:44:15 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Feb  5 16:44:15 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Feb  5 16:44:15 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sun Feb  5 23:22:16 2012] Spatial fit model total counts = 8063.450000, observed total counts = 8062.000000
[Sun Feb  5 23:22:16 2012] Offset between fit and detection position for source 45 = 4.193936 pixels
[Sun Feb  5 23:22:16 2012] Warning, changing simple spatial fit ID from 43 to 42
[Sun Feb  5 23:22:16 2012] 8381.505000 total counts/ 7544.220000 bgd. counts: snr = 9.639758
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 4.193936 pixels
  Position = (312.4, 297.9) = 0 42 46.89 41 15 15.7
  Extent = 13.3 (11.3-14.4)", rotation angle = 0
  Source counts = 837.3 +/- 91.6
  Background counts = 7544.2
  Rate = 0.06 +/- 0.006
[Sun Feb  5 23:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:17 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:17 2012] Source does appear to be extended
[Sun Feb  5 23:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 23:22:17 2012] Source is confused with source 44
[Sun Feb  5 23:22:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 23:22:57 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Sun Feb  5 23:22:57 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.970
[Sun Feb  5 23:22:57 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 13.29"
[Mon Feb  6 03:58:38 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src43.ximg exists
[Mon Feb  6 03:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src43.csv
[Mon Feb  6 03:58:38 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Feb  6 03:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src43.csv
[Mon Feb  6 03:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 03:58:40 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Feb  6 03:58:40 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Feb  6 03:58:40 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Mon Feb  6 08:41:12 2012] Spatial fit model total counts = 8050.990000, observed total counts = 8062.000000
[Mon Feb  6 08:41:12 2012] Offset between fit and detection position for source 45 = 0.792644 pixels
[Mon Feb  6 08:41:12 2012] Warning, changing simple spatial fit ID from 43 to 42
[Mon Feb  6 08:41:12 2012] 8407.754000 total counts/ 7718.970000 bgd. counts: snr = 7.839771
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.792644 pixels
  Position = (312.4, 298.7) = 0 42 46.89 41 15 19.1
  Extent = 14.4 (14.3-28.7)" x 8.1 (6.6-9.9)", rotation angle = 90
  Source counts = 688.8 +/- 91.7
  Background counts = 7719.0
  Rate = 0.05 +/- 0.006
[Mon Feb  6 08:41:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:13 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:13 2012] Source does appear to be extended
[Mon Feb  6 08:41:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.45
[Mon Feb  6 08:41:52 2012] XMMSAS src. selection expression = ellipse(27129.824000, 25936.305200, 862.014025, 488.961614, 90.000000, X, Y)
[Mon Feb  6 08:41:52 2012] Writing source region out to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src45_src.reg
[Mon Feb  6 08:41:52 2012] Extracting stamp from image fullrun_pn_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (263, 249) - (362, 348)
[Mon Feb  6 08:41:52 2012] XMMSAS bgd. selection expression = annulus(27129.824000, 25936.305200, 1436.690041, 2873.380083, X, Y) && !ellipse(25716.303520, 24797.984400, 1413.002441, 1413.002441, 0.000000, X, Y) && !ellipse(29014.687640, 26798.008000, 1687.495249, 1687.495249, 0.000000, X, Y) && !ellipse(26620.979437, 28770.987340, 468.596211, 332.257444, 13.757322, X, Y) && !ellipse(27572.852800, 28561.134200, 891.736026, 891.736026, 0.000000, X, Y) && !ellipse(28113.542000, 27961.250000, 693.087220, 693.087220, 0.000000, X, Y) && !ellipse(25930.628600, 27696.742860, 426.037612, 426.037612, 0.000000, X, Y) && !ellipse(30108.802000, 27220.906000, 537.349615, 537.349615, 0.000000, X, Y) && !ellipse(27081.184080, 27263.358200, 507.119215, 507.119215, 0.000000, X, Y) && !ellipse(27120.068000, 27250.898000, 676.888819, 676.888819, 0.000000, X, Y) && !ellipse(26606.366608, 26749.183289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.512000, 26791.092000, 307.885609, 307.885609, 0.000000, X, Y) && !ellipse(24213.566589, 26845.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.709656, 26576.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.122000, 26337.718000, 598.574417, 331.033610, 359.947000, X, Y) && !ellipse(24595.378387, 26253.024689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28353.272000, 26283.558000, 1180.392034, 1180.392034, 0.000000, X, Y) && !ellipse(27871.426000, 25542.838000, 1191.328034, 1191.328034, 0.000000, X, Y) && !ellipse(28167.570000, 25235.797200, 343.753610, 343.753610, 0.000000, X, Y) && !ellipse(28798.294000, 24957.706000, 418.091212, 418.091212, 0.000000, X, Y) && !ellipse(28531.893400, 23689.614600, 412.564012, 412.564012, 0.000000, X, Y) && !ellipse(30460.451400, 23433.464000, 482.360814, 482.360814, 0.000000, X, Y) && !ellipse(27305.542023, 29353.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.370000, 28616.812000, 1307.376038, 1307.376038, 0.000000, X, Y) && !ellipse(28710.198000, 28839.226000, 705.511220, 705.511220, 0.000000, X, Y) && !ellipse(29486.056000, 28350.016000, 812.160023, 812.160023, 0.000000, X, Y) && !ellipse(24855.822800, 28805.486400, 950.376027, 950.376027, 0.000000, X, Y) && !ellipse(29791.161865, 27776.419434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25295.700775, 27645.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29368.111000, 27440.410000, 1275.104037, 461.176813, 204.921000, X, Y) && !ellipse(26943.204865, 24568.735168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.474426, 24495.820099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29214.744000, 24538.570000, 1229.840035, 1229.840035, 0.000000, X, Y) && !ellipse(27650.725037, 24080.849640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.040600, 23483.778200, 574.140817, 574.140817, 0.000000, X, Y) && !ellipse(26002.703217, 23272.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.265503, 22739.358917, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 08:41:52 2012] Writing fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src45.gif
[Mon Feb  6 09:24:17 2012] Mean detx,y = (-152.76, 894.87) 
[Mon Feb  6 09:24:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 09:24:30 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 09:24:30 2012] Setting source spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Feb  6 09:24:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon Feb  6 21:37:35 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:35 2012] Error reading totcts from fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Feb  6 21:37:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:36 2012] Using photon index=1.80, rate=0.0486, arf fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src45.arf
[Mon Feb  6 21:37:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:36 2012] Updating source flux to 1.4e-13
[Mon Feb  6 21:44:37 2012] Flag c found in src. 45 procflags, skipping spectral fitting