[Sun Feb  5 10:17:59 2012] Detection parameters:
  Position = (326.4, 300.2) = 0 42 41.46 41 15 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1252.8 +/- 52.2
  Background counts = 118.5
  Rate = 0.09 +/- 0.004

[Sun Feb  5 10:18:02 2012] Off-axis axis estimate = 2.03'
[Sun Feb  5 10:20:29 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:20:29 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Feb  5 10:20:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Sun Feb  5 10:20:29 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.45"
[Sun Feb  5 16:44:13 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src41.ximg exists
[Sun Feb  5 16:44:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src41.csv
[Sun Feb  5 16:44:13 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Feb  5 16:44:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src41.csv
[Sun Feb  5 16:44:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:44:15 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Feb  5 16:44:15 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Feb  5 16:44:15 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Feb  5 23:22:16 2012] Warning, spatial fit 41 centroid is now closest to src. 51
[Sun Feb  5 23:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:17 2012] Assessing source extent using major
[Sun Feb  5 23:22:17 2012] Source does appear to be extended
[Sun Feb  5 23:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 23:22:17 2012] Source is confused with source 40
[Sun Feb  5 23:22:57 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 23:22:57 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Feb  5 23:22:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Sun Feb  5 23:22:57 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 7.45"
[Mon Feb  6 03:58:38 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src41.ximg exists
[Mon Feb  6 03:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src41.csv
[Mon Feb  6 03:58:38 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src41_1.ximg exists
[Mon Feb  6 03:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src41.csv
[Mon Feb  6 03:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 03:58:40 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Mon Feb  6 03:58:40 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Mon Feb  6 03:58:40 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Mon Feb  6 08:41:12 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.454505 pixels away
[Mon Feb  6 08:41:12 2012] Spatial fit model total counts = 13307.200000, observed total counts = 13296.000000
[Mon Feb  6 08:41:12 2012] Offset between fit and detection position for source 43 = 2.486860 pixels
[Mon Feb  6 08:41:12 2012] Warning, changing simple spatial fit ID from 41 to 39
[Mon Feb  6 08:41:12 2012] 12602.800000 total counts/ 10301.200000 bgd. counts: snr = 22.677018
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.486860 pixels
  Position = (326.5, 302.7) = 0 42 41.46 41 15 36.5
  Extent = 14.8 (14.7-29.5)", rotation angle = 0
  Source counts = 2301.6 +/- 112.3
  Background counts = 10301.2
  Rate = 0.2 +/- 0.008
[Mon Feb  6 08:41:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:13 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:13 2012] Source does appear to be extended
[Mon Feb  6 08:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 08:41:51 2012] Counts = 2301.600000, rescaling region sizes by 2.000000
[Mon Feb  6 08:41:51 2012] XMMSAS src. selection expression = ellipse(28353.272000, 26283.558000, 1770.588051, 1770.588051, 0.000000, X, Y)
[Mon Feb  6 08:41:51 2012] Writing source region out to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src43_src.reg
[Mon Feb  6 08:41:51 2012] Extracting stamp from image fullrun_pn_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (225, 201) - (428, 404)
[Mon Feb  6 08:41:51 2012] XMMSAS bgd. selection expression = annulus(28353.272000, 26283.558000, 5901.960170, 11803.920340, X, Y) && !ellipse(25716.303520, 24797.984400, 1413.002441, 1413.002441, 0.000000, X, Y) && !ellipse(32529.066000, 26240.898000, 1276.195237, 1180.569634, 80.544000, X, Y) && !ellipse(29014.687640, 26798.008000, 1687.495249, 1687.495249, 0.000000, X, Y) && !ellipse(31849.722900, 38552.612518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.340469, 38641.705326, 743.384021, 435.182711, 14.661727, X, Y) && !ellipse(26783.860626, 37978.358887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23425.390427, 33167.986155, 626.162265, 414.396131, 331.814596, X, Y) && !ellipse(19970.660400, 31944.489800, 350.153610, 350.153610, 0.000000, X, Y) && !ellipse(29763.374040, 31645.836383, 500.726852, 450.307304, 2.334503, X, Y) && !ellipse(30671.768020, 31105.876600, 375.020011, 375.020011, 0.000000, X, Y) && !ellipse(31817.814200, 30632.446600, 462.565613, 462.565613, 0.000000, X, Y) && !ellipse(25565.638000, 30140.881600, 1296.432037, 380.956811, 315.977000, X, Y) && !ellipse(24254.598600, 30719.581000, 455.007213, 455.007213, 0.000000, X, Y) && !ellipse(23810.750854, 30136.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.109600, 30040.447400, 448.803213, 448.803213, 0.000000, X, Y) && !ellipse(25242.823212, 29876.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34732.480000, 29883.614000, 465.436813, 465.436813, 0.000000, X, Y) && !ellipse(17883.140780, 29759.569800, 483.072014, 483.072014, 0.000000, X, Y) && !ellipse(26654.296000, 29436.026000, 342.804810, 342.804810, 0.000000, X, Y) && !ellipse(35949.674000, 29435.802000, 332.116010, 332.116010, 0.000000, X, Y) && !ellipse(23312.657600, 29240.558000, 447.272013, 447.272013, 0.000000, X, Y) && !ellipse(34957.857000, 29115.026200, 301.648009, 301.648009, 0.000000, X, Y) && !ellipse(26620.979437, 28770.987340, 468.596211, 332.257444, 13.757322, X, Y) && !ellipse(35569.387085, 28856.533142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27572.852800, 28561.134200, 891.736026, 891.736026, 0.000000, X, Y) && !ellipse(28113.542000, 27961.250000, 693.087220, 693.087220, 0.000000, X, Y) && !ellipse(25930.628600, 27696.742860, 426.037612, 426.037612, 0.000000, X, Y) && !ellipse(30108.802000, 27220.906000, 537.349615, 537.349615, 0.000000, X, Y) && !ellipse(30680.415460, 27165.981700, 457.058413, 457.058413, 0.000000, X, Y) && !ellipse(27081.184080, 27263.358200, 507.119215, 507.119215, 0.000000, X, Y) && !ellipse(32884.114349, 26711.681000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.068000, 27250.898000, 676.888819, 676.888819, 0.000000, X, Y) && !ellipse(26606.366608, 26749.183289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.512000, 26791.092000, 307.885609, 307.885609, 0.000000, X, Y) && !ellipse(24213.566589, 26845.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.709656, 26576.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.122000, 26337.718000, 598.574417, 331.033610, 359.947000, X, Y) && !ellipse(24595.378387, 26253.024689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27871.426000, 25542.838000, 1191.328034, 1191.328034, 0.000000, X, Y) && !ellipse(27129.824000, 25936.305200, 1149.352033, 651.948819, 90.000000, X, Y) && !ellipse(23474.147200, 26064.888800, 488.512814, 488.512814, 0.000000, X, Y) && !ellipse(39589.405160, 25123.506480, 458.969613, 458.969613, 0.000000, X, Y) && !ellipse(28167.570000, 25235.797200, 343.753610, 343.753610, 0.000000, X, Y) && !ellipse(21772.412800, 25365.925400, 447.840013, 447.840013, 0.000000, X, Y) && !ellipse(15745.938736, 25203.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.294000, 24957.706000, 418.091212, 418.091212, 0.000000, X, Y) && !ellipse(32481.046387, 24498.528229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28531.893400, 23689.614600, 412.564012, 412.564012, 0.000000, X, Y) && !ellipse(16414.510000, 23616.898600, 442.996813, 442.996813, 0.000000, X, Y) && !ellipse(30460.451400, 23433.464000, 482.360814, 482.360814, 0.000000, X, Y) && !ellipse(22205.378400, 22904.437340, 356.572810, 356.572810, 0.000000, X, Y) && !ellipse(34675.448000, 22724.009600, 1210.136035, 1210.136035, 0.000000, X, Y) && !ellipse(31322.317261, 22399.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.111328, 22427.929291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.775238, 21509.366150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24635.804200, 20831.982800, 430.078412, 430.078412, 0.000000, X, Y) && !ellipse(35073.647980, 20543.094788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16831.888199, 20386.793213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27336.803600, 20268.559200, 453.115213, 453.115213, 0.000000, X, Y) && !ellipse(31345.370780, 19549.824200, 447.607213, 447.607213, 0.000000, X, Y) && !ellipse(23459.819702, 19867.975266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17552.452530, 16918.943954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20909.761800, 16365.004400, 440.511213, 440.511213, 0.000000, X, Y) && !ellipse(32200.731049, 36390.954041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28298.679626, 32793.976105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35659.908000, 32515.768000, 427.021612, 427.021612, 0.000000, X, Y) && !ellipse(34172.028200, 32175.746200, 407.116812, 407.116812, 0.000000, X, Y) && !ellipse(35081.114000, 31633.760000, 1708.088049, 1708.088049, 0.000000, X, Y) && !ellipse(27305.542023, 29353.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.370000, 28616.812000, 1307.376038, 1307.376038, 0.000000, X, Y) && !ellipse(34256.358276, 29113.359436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19449.609820, 28976.620800, 458.099213, 458.099213, 0.000000, X, Y) && !ellipse(28710.198000, 28839.226000, 705.511220, 705.511220, 0.000000, X, Y) && !ellipse(29486.056000, 28350.016000, 812.160023, 812.160023, 0.000000, X, Y) && !ellipse(34127.896240, 28361.479400, 396.523211, 396.523211, 0.000000, X, Y) && !ellipse(24855.822800, 28805.486400, 950.376027, 950.376027, 0.000000, X, Y) && !ellipse(29791.161865, 27776.419434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35039.530853, 27726.143799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25295.700775, 27645.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29368.111000, 27440.410000, 1275.104037, 461.176813, 204.921000, X, Y) && !ellipse(31670.694275, 26823.895813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35383.051819, 25727.713867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26943.204865, 24568.735168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.474426, 24495.820099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29214.744000, 24538.570000, 1229.840035, 1229.840035, 0.000000, X, Y) && !ellipse(31143.206329, 24126.330292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27650.725037, 24080.849640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23923.040600, 23483.778200, 574.140817, 574.140817, 0.000000, X, Y) && !ellipse(26002.703217, 23272.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.265503, 22739.358917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24157.877350, 21607.391159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23585.579800, 20476.596000, 1550.672045, 341.836810, 121.692000, X, Y) && !ellipse(22767.034943, 18744.762466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22322.259125, 17870.931259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.717773, 16570.285507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21560.098450, 16309.641281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21264.433060, 15710.617554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20617.160812, 14414.422958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20910.598633, 14994.590668, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 08:41:51 2012] Writing fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src43.gif
[Mon Feb  6 09:17:37 2012] Mean detx,y = (735.04, -145.36) 
[Mon Feb  6 09:17:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 09:20:55 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 09:20:55 2012] Setting source spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Feb  6 09:20:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Feb  6 21:37:35 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:35 2012] Error reading totcts from fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Feb  6 21:37:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:36 2012] Using photon index=1.80, rate=0.162, arf fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src43.arf
[Mon Feb  6 21:37:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:36 2012] Updating source flux to 3.4e-13
[Mon Feb  6 21:44:37 2012] Flag c found in src. 43 procflags, skipping spectral fitting