[Sun Feb  5 10:17:58 2012] Detection parameters:
  Position = (306.3, 338.7) = 0 42 49.24 41 18 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 284.9 +/- 23.1
  Background counts = 91.7
  Rate = 0.02 +/- 0.002

[Sun Feb  5 10:18:02 2012] Off-axis axis estimate = 2.97'
[Sun Feb  5 10:20:29 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:20:29 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Sun Feb  5 10:20:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.604
[Sun Feb  5 10:20:29 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.92"
[Sun Feb  5 16:44:12 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src21.ximg exists
[Sun Feb  5 16:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src21.csv
[Sun Feb  5 16:44:12 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Feb  5 16:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src21.csv
[Sun Feb  5 16:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:44:14 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Feb  5 16:44:14 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Feb  5 16:44:14 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Feb  5 23:22:16 2012] Warning, spatial fit 21 centroid is now closest to src. 26
[Sun Feb  5 23:22:16 2012] Source 22 is offset by -0.242523 and 7.377712 pixels which is larger than
2 X fitted extent = 2.285752 x 2.285752, not incorporating fit results
[Sun Feb  5 23:22:17 2012] Spatial fit model total counts = 909.341000, observed total counts = 962.000000
[Sun Feb  5 23:22:17 2012] Offset between fit and detection position for source 22 = 0.668183 pixels
[Sun Feb  5 23:22:17 2012] Warning, changing simple spatial fit ID from 21 to 82
[Sun Feb  5 23:22:17 2012] 928.986000 total counts/ 749.436000 bgd. counts: snr = 6.558706
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.668183 pixels
  Position = (306.9, 338.9) = 0 42 48.99 41 18 14.1
  Extent = 4.3 (3.7-4.7)", rotation angle = 0
  Source counts = 179.6 +/- 30.5
  Background counts = 749.4
  Rate = 0.01 +/- 0.002
[Sun Feb  5 23:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:17 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:17 2012] Source does appear to be extended
[Sun Feb  5 23:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 23:22:17 2012] Source is confused with source 26
[Sun Feb  5 23:22:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 23:22:57 2012] Initial guess for spatial extent in simple fitting = 4.29"
[Sun Feb  5 23:22:57 2012] source mask rpix=1.0, npix_max = 8, mask sum = 5, frac = 0.567
[Sun Feb  5 23:22:57 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 4.29"
[Mon Feb  6 03:58:37 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src21.ximg exists
[Mon Feb  6 03:58:37 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Feb  6 03:58:37 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src21 appears to have run properly
[Mon Feb  6 03:58:39 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Feb  6 03:58:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Feb  6 03:58:39 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Feb  6 03:58:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Feb  6 03:58:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 08:41:12 2012] Warning, spatial fit 21 centroid is now closest to src. 85
[Mon Feb  6 08:41:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:13 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:13 2012] Source does appear to be extended
[Mon Feb  6 08:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 08:41:50 2012] XMMSAS src. selection expression = ellipse(26654.296000, 29436.026000, 257.103607, 257.103607, 0.000000, X, Y)
[Mon Feb  6 08:41:50 2012] Writing source region out to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src22_src.reg
[Mon Feb  6 08:41:50 2012] Extracting stamp from image fullrun_pn_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (292, 324) - (322, 354)
[Mon Feb  6 08:41:50 2012] XMMSAS bgd. selection expression = annulus(26654.296000, 29436.026000, 428.506012, 857.012025, X, Y) && !ellipse(25565.638000, 30140.881600, 1296.432037, 380.956811, 315.977000, X, Y) && !ellipse(25242.823212, 29876.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26620.979437, 28770.987340, 468.596211, 332.257444, 13.757322, X, Y) && !ellipse(27572.852800, 28561.134200, 891.736026, 891.736026, 0.000000, X, Y) && !ellipse(28113.542000, 27961.250000, 693.087220, 693.087220, 0.000000, X, Y) && !ellipse(27305.542023, 29353.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.370000, 28616.812000, 1307.376038, 1307.376038, 0.000000, X, Y) && !ellipse(24855.822800, 28805.486400, 950.376027, 950.376027, 0.000000, X, Y)
[Mon Feb  6 08:41:50 2012] Writing fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src22.gif
[Mon Feb  6 09:02:13 2012] Mean detx,y = (-1934.61, -1996.84) 
[Mon Feb  6 09:02:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 09:02:24 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 09:02:24 2012] Setting source spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb  6 09:02:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Feb  6 21:37:35 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:35 2012] Error reading totcts from fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb  6 21:37:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:36 2012] Using photon index=1.80, rate=0.0127, arf fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src22.arf
[Mon Feb  6 21:37:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:36 2012] Updating source flux to 6.6e-14
[Mon Feb  6 21:44:37 2012] Flag b found in src. 22 procflags, skipping spectral fitting
[Mon Feb  6 21:44:37 2012] Flag c found in src. 22 procflags, skipping spectral fitting