[Sun Feb  5 10:17:58 2012] Detection parameters:
  Position = (279.5, 353.8) = 0 42 59.58 41 19 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1932.3 +/- 54.8
  Background counts = 77.2
  Rate = 0.2 +/- 0.005

[Sun Feb  5 10:18:02 2012] Off-axis axis estimate = 4.24'
[Sun Feb  5 10:20:29 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:20:29 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Sun Feb  5 10:20:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Sun Feb  5 10:20:29 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.55"
[Sun Feb  5 16:44:12 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src15.ximg exists
[Sun Feb  5 16:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src15.csv
[Sun Feb  5 16:44:12 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Feb  5 16:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src15.csv
[Sun Feb  5 16:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:44:14 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Feb  5 16:44:14 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Feb  5 16:44:14 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Feb  5 23:22:16 2012] Spatial fit model total counts = 2319.710000, observed total counts = 2321.000000
[Sun Feb  5 23:22:16 2012] Offset between fit and detection position for source 16 = 0.192265 pixels
[Sun Feb  5 23:22:16 2012] 2320.450000 total counts/ 1066.170000 bgd. counts: snr = 38.413269
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.192265 pixels
  Position = (279.3, 353.7) = 0 42 59.64 41 19 18.3
  Extent = 5.7 (5.4-5.9)", rotation angle = 0
  Source counts = 1254.3 +/- 48.2
  Background counts = 1066.2
  Rate = 0.09 +/- 0.003
[Sun Feb  5 23:22:17 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:17 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:17 2012] Source does appear to be extended
[Sun Feb  5 23:22:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 23:22:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 23:22:57 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Sun Feb  5 23:22:57 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.693
[Sun Feb  5 23:22:57 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 5.67"
[Mon Feb  6 03:58:37 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src15.ximg exists
[Mon Feb  6 03:58:37 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Feb  6 03:58:37 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_src15 appears to have run properly
[Mon Feb  6 03:58:39 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Feb  6 03:58:39 2012] fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Feb  6 03:58:39 2012] Fit fullrun_pn_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Feb  6 08:41:12 2012] Spatial fit model total counts = 2312.860000, observed total counts = 2321.000000
[Mon Feb  6 08:41:12 2012] Offset between fit and detection position for source 16 = 0.002074 pixels
[Mon Feb  6 08:41:12 2012] 2313.700000 total counts/ 1058.220000 bgd. counts: snr = 38.594180
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.002074 pixels
  Position = (279.3, 353.7) = 0 42 59.64 41 19 18.3
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1255.5 +/- 48.1
  Background counts = 1058.2
  Rate = 0.09 +/- 0.003
[Mon Feb  6 08:41:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:13 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:13 2012] Source does appear to be extended
[Mon Feb  6 08:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 08:41:50 2012] Counts = 1255.480000, rescaling region sizes by 2.000000
[Mon Feb  6 08:41:50 2012] XMMSAS src. selection expression = ellipse(24254.598600, 30719.581000, 682.510820, 682.510820, 0.000000, X, Y)
[Mon Feb  6 08:41:50 2012] Writing source region out to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src16_src.reg
[Mon Feb  6 08:41:50 2012] Extracting stamp from image fullrun_pn_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (240, 314) - (319, 393)
[Mon Feb  6 08:41:50 2012] XMMSAS bgd. selection expression = annulus(24254.598600, 30719.581000, 2275.036065, 4550.072131, X, Y) && !ellipse(25716.303520, 24797.984400, 1413.002441, 1413.002441, 0.000000, X, Y) && !ellipse(29014.687640, 26798.008000, 1687.495249, 1687.495249, 0.000000, X, Y) && !ellipse(23425.390427, 33167.986155, 626.162265, 414.396131, 331.814596, X, Y) && !ellipse(19970.660400, 31944.489800, 350.153610, 350.153610, 0.000000, X, Y) && !ellipse(25565.638000, 30140.881600, 1296.432037, 380.956811, 315.977000, X, Y) && !ellipse(23810.750854, 30136.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.109600, 30040.447400, 448.803213, 448.803213, 0.000000, X, Y) && !ellipse(25242.823212, 29876.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26654.296000, 29436.026000, 342.804810, 342.804810, 0.000000, X, Y) && !ellipse(23312.657600, 29240.558000, 447.272013, 447.272013, 0.000000, X, Y) && !ellipse(26620.979437, 28770.987340, 468.596211, 332.257444, 13.757322, X, Y) && !ellipse(27572.852800, 28561.134200, 891.736026, 891.736026, 0.000000, X, Y) && !ellipse(28113.542000, 27961.250000, 693.087220, 693.087220, 0.000000, X, Y) && !ellipse(25930.628600, 27696.742860, 426.037612, 426.037612, 0.000000, X, Y) && !ellipse(27081.184080, 27263.358200, 507.119215, 507.119215, 0.000000, X, Y) && !ellipse(27120.068000, 27250.898000, 676.888819, 676.888819, 0.000000, X, Y) && !ellipse(26606.366608, 26749.183289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.512000, 26791.092000, 307.885609, 307.885609, 0.000000, X, Y) && !ellipse(24213.566589, 26845.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.709656, 26576.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.122000, 26337.718000, 598.574417, 331.033610, 359.947000, X, Y) && !ellipse(24595.378387, 26253.024689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28353.272000, 26283.558000, 1180.392034, 1180.392034, 0.000000, X, Y) && !ellipse(27871.426000, 25542.838000, 1191.328034, 1191.328034, 0.000000, X, Y) && !ellipse(27129.824000, 25936.305200, 1149.352033, 651.948819, 90.000000, X, Y) && !ellipse(23474.147200, 26064.888800, 488.512814, 488.512814, 0.000000, X, Y) && !ellipse(28298.679626, 32793.976105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27305.542023, 29353.756409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.370000, 28616.812000, 1307.376038, 1307.376038, 0.000000, X, Y) && !ellipse(19449.609820, 28976.620800, 458.099213, 458.099213, 0.000000, X, Y) && !ellipse(28710.198000, 28839.226000, 705.511220, 705.511220, 0.000000, X, Y) && !ellipse(29486.056000, 28350.016000, 812.160023, 812.160023, 0.000000, X, Y) && !ellipse(24855.822800, 28805.486400, 950.376027, 950.376027, 0.000000, X, Y) && !ellipse(25295.700775, 27645.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29368.111000, 27440.410000, 1275.104037, 461.176813, 204.921000, X, Y)
[Mon Feb  6 08:41:50 2012] Writing fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src16.gif
[Mon Feb  6 08:59:47 2012] Mean detx,y = (-4661.38, -2099.33) 
[Mon Feb  6 08:59:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 09:00:25 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 09:00:25 2012] Setting source spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Feb  6 09:00:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Feb  6 21:37:35 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:35 2012] Error reading totcts from fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Feb  6 21:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:35 2012] Using photon index=1.80, rate=0.0886, arf fullrun_pn_xmm0600660401_pi300-10000_pass1_cl_src16.arf
[Mon Feb  6 21:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:35 2012] Updating source flux to 2.9e-13