[Sun Feb  5 10:18:10 2012] Detection parameters:
  Position = (340.7, 299.3) = 0 42 35.96 41 15 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.1 +/- 16.4
  Background counts = 38.6
  Rate = 0.005 +/- 0.001

[Sun Feb  5 10:18:10 2012] Off-axis axis estimate = 3.07'
[Sun Feb  5 20:11:05 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 20:11:05 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Sun Feb  5 20:11:05 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.151
[Sun Feb  5 20:11:05 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 7.96"
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src70.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src70.csv
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src70.csv
[Sun Feb  5 23:22:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:22:02 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun Feb  5 23:22:02 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun Feb  5 23:22:02 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Sun Feb  5 23:22:37 2012] Spatial fit model total counts = 2414.400000, observed total counts = 2385.000000
[Sun Feb  5 23:22:37 2012] Offset between fit and detection position for source 81 = 8.285396 pixels
[Sun Feb  5 23:22:37 2012] 1674.540000 total counts/ 1285.090000 bgd. counts: snr = 10.863879
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 8.285396 pixels
  Position = (347.5, 294.5) = 0 42 33.35 41 15 1.0
  Extent = 15.9 (15.8-31.8)", rotation angle = 0
  Source counts = 389.4 +/- 40.9
  Background counts = 1285.1
  Rate = 0.02 +/- 0.002
[Sun Feb  5 23:22:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:37 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:37 2012] Source does appear to be extended
[Sun Feb  5 23:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 06:20:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 06:20:12 2012] Initial guess for spatial extent in simple fitting = 15.92"
[Mon Feb  6 06:20:12 2012] source mask rpix=3.7, npix_max = 69, mask sum = 81, frac = 1.170
[Mon Feb  6 06:20:12 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 15.92"
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src67.ximg exists
[Mon Feb  6 08:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src67.csv
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src67_1.ximg exists
[Mon Feb  6 08:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src67.csv
[Mon Feb  6 08:40:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Mon Feb  6 08:40:56 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Mon Feb  6 08:41:30 2012] Warning, spatial fit 67 centroid is now closest to src. 10
[Mon Feb  6 08:41:30 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:30 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:30 2012] Source does appear to be extended
[Mon Feb  6 08:41:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 19:09:31 2012] XMMSAS src. selection expression = ellipse(30182.600000, 25574.868000, 955.374027, 955.374027, 0.000000, X, Y)
[Mon Feb  6 19:09:31 2012] Writing source region out to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src81_src.reg
[Mon Feb  6 19:09:31 2012] Extracting stamp from image fullrun_mos2_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (293, 240) - (402, 349)
[Mon Feb  6 19:09:31 2012] XMMSAS bgd. selection expression = annulus(30182.600000, 25574.868000, 1592.290046, 3184.580092, X, Y) && !ellipse(25711.055960, 24790.566200, 1346.013639, 1346.013639, 0.000000, X, Y) && !ellipse(28997.441580, 26808.160800, 421.412812, 421.412812, 0.000000, X, Y) && !ellipse(32662.064000, 25991.322000, 1036.936030, 1036.936030, 0.000000, X, Y) && !ellipse(26786.175600, 25987.107000, 554.993616, 446.172013, 90.000000, X, Y) && !ellipse(27102.582000, 27252.912000, 545.368816, 545.368816, 0.000000, X, Y) && !ellipse(30564.672000, 27683.438000, 1316.592038, 1316.592038, 0.000000, X, Y) && !ellipse(27719.477020, 26902.649292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33569.312600, 22419.061200, 520.687215, 520.687215, 0.000000, X, Y) && !ellipse(30456.234000, 23419.578800, 431.241612, 431.241612, 0.000000, X, Y) && !ellipse(33516.013977, 24389.762299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26078.606000, 25963.708000, 1055.960030, 1055.960030, 0.000000, X, Y) && !ellipse(32872.450806, 26714.888275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27879.572000, 25542.248000, 1192.504034, 1192.504034, 0.000000, X, Y) && !ellipse(32487.282960, 24481.745600, 305.536009, 305.536009, 0.000000, X, Y) && !ellipse(28168.865200, 25237.305600, 406.443212, 301.438409, 62.900000, X, Y) && !ellipse(32655.477460, 23787.426600, 312.112809, 312.112809, 0.000000, X, Y) && !ellipse(28547.190369, 23692.764008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31329.649600, 22398.775000, 277.780008, 277.780008, 0.000000, X, Y) && !ellipse(30066.226440, 27119.754800, 293.048808, 293.048808, 0.000000, X, Y) && !ellipse(28794.947083, 24928.289856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27609.455261, 28656.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34169.007812, 28380.725342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31441.434000, 23629.812000, 1455.664042, 1455.664042, 0.000000, X, Y) && !ellipse(26991.718000, 27634.282000, 1184.440034, 1184.440034, 0.000000, X, Y) && !ellipse(31044.290000, 27104.838000, 1418.016041, 1418.016041, 0.000000, X, Y) && !ellipse(31856.414000, 24740.070000, 1445.648042, 1445.648042, 0.000000, X, Y)
[Mon Feb  6 19:09:31 2012] Writing fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src81.gif
[Mon Feb  6 19:24:38 2012] Mean detx,y = (-2641.13, -5.01) 
[Mon Feb  6 19:24:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 19:24:45 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 19:24:45 2012] Setting source spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon Feb  6 19:24:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Mon Feb  6 21:37:38 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:38 2012] Error reading totcts from fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon Feb  6 21:37:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:39 2012] Using photon index=1.80, rate=0.023, arf fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src81.arf
[Mon Feb  6 21:37:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:39 2012] Updating source flux to 2.2e-13