[Sun Feb  5 10:18:07 2012] Detection parameters:
  Position = (312.0, 313.9) = 0 42 47.03 41 16 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2030.5 +/- 55.5
  Background counts = 40.0
  Rate = 0.1 +/- 0.003

[Sun Feb  5 10:18:10 2012] Off-axis axis estimate = 1.49'
[Sun Feb  5 20:11:05 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 20:11:05 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Sun Feb  5 20:11:05 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.866
[Sun Feb  5 20:11:05 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.17"
[Sun Feb  5 23:22:00 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src6.ximg exists
[Sun Feb  5 23:22:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src6.csv
[Sun Feb  5 23:22:00 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Feb  5 23:22:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src6.csv
[Sun Feb  5 23:22:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Feb  5 23:22:01 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Feb  5 23:22:37 2012] Spatial fit model total counts = 4390.900000, observed total counts = 4392.000000
[Sun Feb  5 23:22:37 2012] Offset between fit and detection position for source 6 = 0.202636 pixels
[Sun Feb  5 23:22:37 2012] 4343.780000 total counts/ 3311.440000 bgd. counts: snr = 17.939664
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.202636 pixels
  Position = (311.8, 313.9) = 0 42 47.11 41 16 25.4
  Extent = 5.6 (5.2-6.1)", rotation angle = 0
  Source counts = 1032.3 +/- 65.9
  Background counts = 3311.4
  Rate = 0.06 +/- 0.004
[Sun Feb  5 23:22:37 2012] Spatial fit model total counts = 3941.690000, observed total counts = 3940.000000
[Sun Feb  5 23:22:37 2012] Offset between fit and detection position for source 6 = 0.151162 pixels
[Sun Feb  5 23:22:37 2012] Warning, changing simple spatial fit ID from 6 to 30
[Sun Feb  5 23:22:37 2012] 3835.980000 total counts/ 2799.250000 bgd. counts: snr = 19.594980
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.151162 pixels
  Position = (311.8, 313.8) = 0 42 47.10 41 16 24.8
  Extent = 7.7 (7.0-8.3)" x 4.3 (3.9-4.9)", rotation angle = 76 (69-82) degrees
  Source counts = 1036.7 +/- 61.9
  Background counts = 2799.2
  Rate = 0.06 +/- 0.004
[Sun Feb  5 23:22:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:37 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:37 2012] Source does appear to be extended
[Sun Feb  5 23:22:37 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Mon Feb  6 06:20:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 06:20:12 2012] Initial guess for spatial extent in simple fitting = 5.97"
[Mon Feb  6 06:20:12 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.140
[Mon Feb  6 06:20:12 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.97"
[Mon Feb  6 08:40:55 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src6.ximg exists
[Mon Feb  6 08:40:55 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Feb  6 08:40:55 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src6 appears to have run properly
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Feb  6 08:40:56 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Feb  6 08:41:30 2012] Warning, spatial fit 6 centroid is now closest to src. 26
[Mon Feb  6 08:41:30 2012] Spatial fit model total counts = 3939.850000, observed total counts = 3940.000000
[Mon Feb  6 08:41:30 2012] Offset between fit and detection position for source 6 = 0.242153 pixels
[Mon Feb  6 08:41:30 2012] Warning, changing simple spatial fit ID from 6 to 28
[Mon Feb  6 08:41:30 2012] 3850.680000 total counts/ 2741.920000 bgd. counts: snr = 21.174354
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.242153 pixels
  Position = (312.1, 313.8) = 0 42 47.01 41 16 25.0
  Extent = 6.8 (6.2-7.5)", rotation angle = 0
  Source counts = 1108.8 +/- 62.1
  Background counts = 2741.9
  Rate = 0.07 +/- 0.004
[Mon Feb  6 08:41:30 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:30 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:30 2012] Source does appear to be extended
[Mon Feb  6 08:41:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 08:41:30 2012] Source is confused with source 76
[Mon Feb  6 19:09:30 2012] Counts = 1108.760000, rescaling region sizes by 2.000000
[Mon Feb  6 19:09:30 2012] XMMSAS src. selection expression = ellipse(27102.582000, 27252.912000, 818.053224, 818.053224, 0.000000, X, Y)
[Mon Feb  6 19:09:30 2012] Writing source region out to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src6_src.reg
[Mon Feb  6 19:09:30 2012] Extracting stamp from image fullrun_mos2_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (265, 267) - (359, 361)
[Mon Feb  6 19:09:30 2012] XMMSAS bgd. selection expression = annulus(27102.582000, 27252.912000, 2726.844078, 5453.688157, X, Y) && !ellipse(25711.055960, 24790.566200, 1346.013639, 1346.013639, 0.000000, X, Y) && !ellipse(28997.441580, 26808.160800, 421.412812, 421.412812, 0.000000, X, Y) && !ellipse(32662.064000, 25991.322000, 1036.936030, 1036.936030, 0.000000, X, Y) && !ellipse(26786.175600, 25987.107000, 554.993616, 446.172013, 90.000000, X, Y) && !ellipse(21770.107820, 25370.739000, 404.904812, 404.904812, 0.000000, X, Y) && !ellipse(25867.029946, 30220.333480, 409.706250, 364.591401, 0.000000, X, Y) && !ellipse(25305.066800, 26804.690400, 359.708810, 300.905609, 206.651000, X, Y) && !ellipse(30564.672000, 27683.438000, 1316.592038, 1316.592038, 0.000000, X, Y) && !ellipse(27719.477020, 26902.649292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30456.234000, 23419.578800, 431.241612, 431.241612, 0.000000, X, Y) && !ellipse(24254.209000, 30722.273800, 402.520012, 402.520012, 0.000000, X, Y) && !ellipse(27587.779602, 21512.969025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24207.238000, 26862.103800, 329.575209, 329.575209, 0.000000, X, Y) && !ellipse(26078.606000, 25963.708000, 1055.960030, 1055.960030, 0.000000, X, Y) && !ellipse(23307.014400, 29241.317600, 361.216010, 361.216010, 0.000000, X, Y) && !ellipse(32872.450806, 26714.888275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27879.572000, 25542.248000, 1192.504034, 1192.504034, 0.000000, X, Y) && !ellipse(31832.515000, 30624.980000, 425.150412, 425.150412, 0.000000, X, Y) && !ellipse(32487.282960, 24481.745600, 305.536009, 305.536009, 0.000000, X, Y) && !ellipse(28168.865200, 25237.305600, 406.443212, 301.438409, 62.900000, X, Y) && !ellipse(32655.477460, 23787.426600, 312.112809, 312.112809, 0.000000, X, Y) && !ellipse(28547.190369, 23692.764008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.600000, 30028.009000, 294.004008, 294.004008, 0.000000, X, Y) && !ellipse(30686.911400, 31083.493460, 442.864013, 267.018408, 100.344500, X, Y) && !ellipse(31329.649600, 22398.775000, 277.780008, 277.780008, 0.000000, X, Y) && !ellipse(24591.384249, 29415.759472, 1631.278834, 1330.868062, 0.007806, X, Y) && !ellipse(30066.226440, 27119.754800, 293.048808, 293.048808, 0.000000, X, Y) && !ellipse(26604.526000, 29451.945000, 394.292011, 394.292011, 0.000000, X, Y) && !ellipse(26530.968400, 28804.016200, 311.112009, 311.112009, 0.000000, X, Y) && !ellipse(22210.604523, 22915.610382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24566.263336, 26135.056427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28794.947083, 24928.289856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27609.455261, 28656.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31441.434000, 23629.812000, 1455.664042, 1455.664042, 0.000000, X, Y) && !ellipse(26991.718000, 27634.282000, 1184.440034, 1184.440034, 0.000000, X, Y) && !ellipse(30182.600000, 25574.868000, 1273.832037, 1273.832037, 0.000000, X, Y) && !ellipse(31044.290000, 27104.838000, 1418.016041, 1418.016041, 0.000000, X, Y) && !ellipse(23239.954071, 26730.733490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25968.511749, 28586.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31856.414000, 24740.070000, 1445.648042, 1445.648042, 0.000000, X, Y)
[Mon Feb  6 19:09:30 2012] Writing fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src6.gif
[Mon Feb  6 19:12:44 2012] Mean detx,y = (590.75, 73.67) 
[Mon Feb  6 19:12:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 19:12:57 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 19:12:57 2012] Setting source spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Feb  6 19:12:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Feb  6 21:37:37 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:37 2012] Error reading totcts from fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Feb  6 21:37:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:38 2012] Using photon index=1.80, rate=0.0656, arf fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src6.arf
[Mon Feb  6 21:37:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:38 2012] Updating source flux to 7.1e-13
[Mon Feb  6 21:41:05 2012] Flag c found in src. 6 procflags, skipping spectral fitting