[Sun Feb  5 10:18:09 2012] Detection parameters:
  Position = (206.4, 342.1) = 0 43 27.78 41 18 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.6 +/- 11.6
  Background counts = 10.8
  Rate = 0.008 +/- 0.001

[Sun Feb  5 10:18:10 2012] Off-axis axis estimate = 7.38'
[Sun Feb  5 20:11:05 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 20:11:05 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Sun Feb  5 20:11:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Sun Feb  5 20:11:05 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 10.12"
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src59.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src59.csv
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src59.csv
[Sun Feb  5 23:22:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:22:02 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun Feb  5 23:22:02 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun Feb  5 23:22:02 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sun Feb  5 23:22:37 2012] Spatial fit model total counts = 163.999000, observed total counts = 164.000000
[Sun Feb  5 23:22:37 2012] Offset between fit and detection position for source 58 = 0.468912 pixels
[Sun Feb  5 23:22:37 2012] 165.736600 total counts/ 111.505000 bgd. counts: snr = 5.135766
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.468912 pixels
  Position = (206.0, 342.0) = 0 43 27.96 41 18 27.5
  Extent = 5.8 (4.7-7.9)", rotation angle = 0
  Source counts = 54.2 +/- 12.9
  Background counts = 111.5
  Rate = 0.003 +/- 0.0008
[Sun Feb  5 23:22:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:37 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:37 2012] Source does appear to be extended
[Sun Feb  5 23:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 06:20:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 06:20:12 2012] Initial guess for spatial extent in simple fitting = 5.84"
[Mon Feb  6 06:20:12 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.178
[Mon Feb  6 06:20:12 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 5.84"
[Mon Feb  6 08:40:55 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src56.ximg exists
[Mon Feb  6 08:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src56.csv
[Mon Feb  6 08:40:55 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src56_1.ximg exists
[Mon Feb  6 08:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src56.csv
[Mon Feb  6 08:40:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Mon Feb  6 08:40:56 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Mon Feb  6 08:41:30 2012] Warning, spatial fit 56 centroid is now closest to src. 73
[Mon Feb  6 08:41:30 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:30 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:30 2012] Source does appear to be extended
[Mon Feb  6 08:41:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 19:09:31 2012] XMMSAS src. selection expression = ellipse(17872.325120, 29709.448600, 350.544010, 350.544010, 0.000000, X, Y)
[Mon Feb  6 19:09:31 2012] Writing source region out to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src58_src.reg
[Mon Feb  6 19:09:31 2012] Extracting stamp from image fullrun_mos2_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (186, 322) - (226, 362)
[Mon Feb  6 19:09:31 2012] XMMSAS bgd. selection expression = annulus(17872.325120, 29709.448600, 584.240017, 1168.480034, X, Y) && !ellipse(19408.449432, 28945.431488, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 19:09:31 2012] Writing fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src58.gif
[Mon Feb  6 19:22:49 2012] Mean detx,y = (10100.89, -1853.20) 
[Mon Feb  6 19:22:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 19:22:54 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 19:22:54 2012] Setting source spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Feb  6 19:22:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Mon Feb  6 21:12:24 2012] Not generating rmf since there are only 54 counts
[Mon Feb  6 21:12:24 2012] rmf not generated due to insufficient counts
[Mon Feb  6 21:37:38 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:38 2012] Error reading totcts from fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Feb  6 21:37:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:38 2012] Using photon index=1.80, rate=0.00321, arf fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src58.arf
[Mon Feb  6 21:37:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:38 2012] Updating source flux to 7.3e-14
[Mon Feb  6 21:41:05 2012] Source 58 has fewer than 100.000000 counts, skipping spectral fitting