[Sun Feb  5 10:18:08 2012] Detection parameters:
  Position = (360.7, 225.4) = 0 42 28.30 41 9 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 315.8 +/- 22.5
  Background counts = 12.9
  Rate = 0.03 +/- 0.002

[Sun Feb  5 10:18:10 2012] Off-axis axis estimate = 6.95'
[Sun Feb  5 20:11:05 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 20:11:05 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Sun Feb  5 20:11:05 2012] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.583
[Sun Feb  5 20:11:05 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.91"
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src27.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src27.csv
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src27.csv
[Sun Feb  5 23:22:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Feb  5 23:22:01 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Feb  5 23:22:37 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 13.741274 pixels away
[Sun Feb  5 23:22:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:37 2012] Assessing source extent using major
[Sun Feb  5 23:22:37 2012] Source does appear to be extended
[Sun Feb  5 23:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 06:20:12 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Mon Feb  6 06:20:12 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Mon Feb  6 06:20:12 2012] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.583
[Mon Feb  6 06:20:12 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.91"
[Mon Feb  6 08:40:55 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src25.ximg exists
[Mon Feb  6 08:40:55 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Feb  6 08:40:55 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_src25 appears to have run properly
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Feb  6 08:40:56 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Feb  6 08:40:56 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Feb  6 08:41:30 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 12.842703 pixels away
[Mon Feb  6 08:41:30 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:30 2012] Assessing source extent using major
[Mon Feb  6 08:41:30 2012] Source does appear to be extended
[Mon Feb  6 08:41:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 19:09:30 2012] XMMSAS src. selection expression = ellipse(31328.540649, 19564.761627, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb  6 19:09:30 2012] Writing source region out to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src42_src.reg
[Mon Feb  6 19:09:30 2012] Extracting stamp from image fullrun_mos2_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (323, 188) - (398, 263)
[Mon Feb  6 19:09:30 2012] XMMSAS bgd. selection expression = annulus(31328.540649, 19564.761627, 1087.500000, 2175.000000, X, Y) && !ellipse(34325.561615, 22598.382172, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 19:09:30 2012] Writing fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src42.gif
[Mon Feb  6 19:17:41 2012] Mean detx,y = (-6470.36, -4893.09) 
[Mon Feb  6 19:17:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 19:17:59 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 19:17:59 2012] Setting source spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Feb  6 19:17:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Feb  6 20:29:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb  6 20:29:53 2012] rmf not generated due to insufficient counts
[Mon Feb  6 21:37:38 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:38 2012] Error reading totcts from fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Feb  6 21:37:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:38 2012] Using photon index=1.80, rate=0.0288, arf fullrun_mos2_xmm0600660401_pi300-10000_pass1_cl_src42.arf
[Mon Feb  6 21:37:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:38 2012] Updating source flux to 7e-13
[Mon Feb  6 21:41:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting