[Sun Feb  5 10:18:08 2012] Detection parameters:
  Position = (402.5, 335.1) = 0 42 12.11 41 17 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 452.3 +/- 26.4
  Background counts = 11.9
  Rate = 0.04 +/- 0.002

[Sun Feb  5 10:18:10 2012] Off-axis axis estimate = 8.00'
[Sun Feb  5 20:11:05 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 20:11:05 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Sun Feb  5 20:11:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.894
[Sun Feb  5 20:11:05 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.43"
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src25.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src25.csv
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Feb  5 23:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src25.csv
[Sun Feb  5 23:22:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Feb  5 23:22:01 2012] fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Feb  5 23:22:01 2012] Fit fullrun_mos2_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Feb  5 23:22:37 2012] Spatial fit model total counts = 701.762000, observed total counts = 700.000000
[Sun Feb  5 23:22:37 2012] Offset between fit and detection position for source 23 = 5.337357 pixels
[Sun Feb  5 23:22:37 2012] Warning, changing simple spatial fit ID from 25 to 19
[Sun Feb  5 23:22:37 2012] 656.936023 total counts/ 656.936000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 5.337357 pixels
  Position = (404.0, 330.0) = 0 42 11.52 41 17 35.0
  Extent = 21.7 (2.7-40.8)", rotation angle = 0
  Source counts = 0.0 +/- 25.6
  Background counts = 656.9
  Rate = 1e-09 +/- 0.002
  Deleting source due to low Poisson probability