[Sun Feb  5 10:18:05 2012] Detection parameters:
  Position = (315.2, 321.8) = 0 42 45.80 41 17 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.4 +/- 21.0
  Background counts = 35.7
  Rate = 0.01 +/- 0.001

[Sun Feb  5 10:18:06 2012] Off-axis axis estimate = 2.09'
[Sun Feb  5 16:44:16 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 16:44:16 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sun Feb  5 16:44:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Sun Feb  5 16:44:16 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 7.47"
[Sun Feb  5 20:11:03 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src50.ximg exists
[Sun Feb  5 20:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src50.csv
[Sun Feb  5 20:11:03 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun Feb  5 20:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src50.csv
[Sun Feb  5 20:11:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 20:11:04 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun Feb  5 20:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Feb  5 20:11:04 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun Feb  5 20:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Feb  5 20:11:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 23:22:27 2012] Warning, spatial fit 50 centroid is now closest to src. 70
[Sun Feb  5 23:22:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:27 2012] Assessing source extent using major
[Sun Feb  5 23:22:27 2012] Source does appear to be extended
[Sun Feb  5 23:22:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 23:22:27 2012] Source is confused with source 8
[Mon Feb  6 03:58:41 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Mon Feb  6 03:58:41 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Mon Feb  6 03:58:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Mon Feb  6 03:58:41 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 7.47"
[Mon Feb  6 06:20:11 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src50.ximg exists
[Mon Feb  6 06:20:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src50.csv
[Mon Feb  6 06:20:11 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src50_1.ximg exists
[Mon Feb  6 06:20:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src50.csv
[Mon Feb  6 06:20:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 06:20:12 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Mon Feb  6 06:20:12 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Mon Feb  6 06:20:12 2012] Fit fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Mon Feb  6 08:41:21 2012] Warning, spatial fit 50 centroid is now closest to src. 8
[Mon Feb  6 08:41:21 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:21 2012] Assessing source extent using major
[Mon Feb  6 08:41:21 2012] Source does appear to be extended
[Mon Feb  6 08:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 16:02:14 2012] XMMSAS src. selection expression = ellipse(27373.983368, 27948.683044, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb  6 16:02:14 2012] Writing source region out to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src46_src.reg
[Mon Feb  6 16:02:14 2012] Extracting stamp from image fullrun_mos1_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (278, 284) - (353, 359)
[Mon Feb  6 16:02:14 2012] XMMSAS bgd. selection expression = annulus(27373.983368, 27948.683044, 1087.500000, 2175.000000, X, Y) && !ellipse(25712.645394, 24788.905398, 1376.896044, 1314.352818, 238.464390, X, Y) && !ellipse(28999.761320, 26806.028200, 417.008812, 417.008812, 0.000000, X, Y) && !ellipse(26788.502600, 25996.619000, 484.126414, 484.126414, 0.000000, X, Y) && !ellipse(25857.484600, 30220.296400, 413.800812, 376.746411, 356.053360, X, Y) && !ellipse(27224.048000, 27186.436400, 1165.456034, 1165.456034, 0.000000, X, Y) && !ellipse(25312.134400, 26799.219800, 353.757610, 353.757610, 0.000000, X, Y) && !ellipse(27616.620000, 27015.452000, 697.783220, 697.783220, 0.000000, X, Y) && !ellipse(28091.422200, 26513.518200, 571.386416, 363.086410, 90.000000, X, Y) && !ellipse(26022.436000, 26333.402000, 524.267215, 524.267215, 0.000000, X, Y) && !ellipse(28332.334778, 26068.125793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.102570, 26756.152740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28649.541748, 30042.293121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26602.971200, 28771.818600, 343.744010, 343.744010, 0.000000, X, Y) && !ellipse(27761.590000, 25625.588000, 1190.016034, 1190.016034, 0.000000, X, Y) && !ellipse(25200.114410, 29722.396606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.635559, 27094.992889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26645.910614, 29461.401917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.041779, 27855.621613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24571.191071, 26142.294037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27214.648000, 25442.464000, 1153.704033, 1153.704033, 0.000000, X, Y)
[Mon Feb  6 16:02:14 2012] Writing fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src46.gif
[Mon Feb  6 16:18:41 2012] Mean detx,y = (899.58, -897.87) 
[Mon Feb  6 16:18:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 16:18:48 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 16:18:48 2012] Setting source spectrum file to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon Feb  6 16:18:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Mon Feb  6 18:58:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb  6 18:58:50 2012] rmf not generated due to insufficient counts
[Mon Feb  6 21:37:37 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:37 2012] Error reading totcts from fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon Feb  6 21:37:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:37 2012] Using photon index=1.80, rate=0.0118, arf fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src46.arf
[Mon Feb  6 21:37:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:37 2012] Updating source flux to 1.2e-13
[Mon Feb  6 21:37:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting