[Sun Feb  5 10:18:03 2012] Detection parameters:
  Position = (374.5, 300.1) = 0 42 22.91 41 15 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6621.1 +/- 114.3
  Background counts = 27.7
  Rate = 0.5 +/- 0.009

[Sun Feb  5 10:18:06 2012] Off-axis axis estimate = 5.52'
[Sun Feb  5 16:44:16 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 16:44:16 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Sun Feb  5 16:44:16 2012] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.733
[Sun Feb  5 16:44:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.19"
[Sun Feb  5 20:11:02 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Feb  5 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src3.csv
[Sun Feb  5 20:11:02 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Feb  5 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src3.csv
[Sun Feb  5 20:11:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 20:11:03 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb  5 20:11:03 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb  5 20:11:03 2012] Fit fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb  5 23:22:26 2012] Warning, spatial fit 3 centroid is now closest to src. 10
[Sun Feb  5 23:22:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:27 2012] Assessing source extent using major
[Sun Feb  5 23:22:27 2012] Source does appear to be extended
[Sun Feb  5 23:22:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 03:58:41 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon Feb  6 03:58:41 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Mon Feb  6 03:58:41 2012] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.733
[Mon Feb  6 03:58:41 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.19"
[Mon Feb  6 06:20:10 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Feb  6 06:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src3.csv
[Mon Feb  6 06:20:10 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Feb  6 06:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src3.csv
[Mon Feb  6 06:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 06:20:11 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Feb  6 06:20:11 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Feb  6 06:20:11 2012] Fit fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Feb  6 08:41:21 2012] Spatial fit model total counts = 6224.170000, observed total counts = 6208.000000
[Mon Feb  6 08:41:21 2012] Offset between fit and detection position for source 3 = 1.701868 pixels
[Mon Feb  6 08:41:21 2012] 6350.300000 total counts/ 2267.920000 bgd. counts: snr = 85.723434
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.701868 pixels
  Position = (374.3, 301.8) = 0 42 23.01 41 15 32.6
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 4082.4 +/- 79.7
  Background counts = 2267.9
  Rate = 0.2 +/- 0.005
[Mon Feb  6 08:41:21 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:21 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:21 2012] Source does appear to be extended
[Mon Feb  6 08:41:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 16:02:13 2012] Counts = 4082.380000, rescaling region sizes by 2.000000
[Mon Feb  6 16:02:13 2012] XMMSAS src. selection expression = ellipse(32513.998200, 26210.283600, 662.774419, 662.774419, 0.000000, X, Y)
[Mon Feb  6 16:02:13 2012] Writing source region out to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src3_src.reg
[Mon Feb  6 16:02:13 2012] Extracting stamp from image fullrun_mos1_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (336, 264) - (412, 340)
[Mon Feb  6 16:02:13 2012] XMMSAS bgd. selection expression = annulus(32513.998200, 26210.283600, 2209.248064, 4418.496127, X, Y) && !ellipse(28999.761320, 26806.028200, 417.008812, 417.008812, 0.000000, X, Y) && !ellipse(27224.048000, 27186.436400, 1165.456034, 1165.456034, 0.000000, X, Y) && !ellipse(27616.620000, 27015.452000, 697.783220, 697.783220, 0.000000, X, Y) && !ellipse(34739.076000, 29899.762000, 456.956813, 300.436809, 90.000000, X, Y) && !ellipse(30664.726740, 27130.001600, 479.427214, 479.427214, 0.000000, X, Y) && !ellipse(33564.588200, 22403.475200, 536.357615, 536.357615, 0.000000, X, Y) && !ellipse(30447.309800, 23412.044000, 441.636013, 441.636013, 0.000000, X, Y) && !ellipse(28091.422200, 26513.518200, 571.386416, 363.086410, 90.000000, X, Y) && !ellipse(33489.741409, 24381.217314, 356.410008, 285.119948, 104.293835, X, Y) && !ellipse(35951.538000, 29425.414000, 257.292807, 257.292807, 0.000000, X, Y) && !ellipse(34972.908203, 29102.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31827.473000, 30627.951600, 429.087212, 429.087212, 0.000000, X, Y) && !ellipse(28332.334778, 26068.125793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.262460, 25236.688000, 251.732807, 251.732807, 0.000000, X, Y) && !ellipse(32472.635540, 24484.905600, 293.087208, 293.087208, 0.000000, X, Y) && !ellipse(32649.678240, 23825.110400, 308.454409, 308.454409, 0.000000, X, Y) && !ellipse(28649.541748, 30042.293121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28529.215820, 23691.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27761.590000, 25625.588000, 1190.016034, 1190.016034, 0.000000, X, Y) && !ellipse(31341.862400, 22383.560880, 360.468810, 360.468810, 0.000000, X, Y) && !ellipse(34299.067078, 22647.218781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35567.348022, 28843.804932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.983368, 27948.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.635559, 27094.992889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.041779, 27855.621613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31657.630000, 24442.084000, 1393.120040, 1393.120040, 0.000000, X, Y) && !ellipse(34256.568024, 29215.670990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27214.648000, 25442.464000, 1153.704033, 1153.704033, 0.000000, X, Y)
[Mon Feb  6 16:02:13 2012] Writing fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src3.gif
[Mon Feb  6 16:05:04 2012] Mean detx,y = (1819.39, 4408.27) 
[Mon Feb  6 16:05:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 16:05:26 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 16:05:26 2012] Setting source spectrum file to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb  6 16:05:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Feb  6 21:37:36 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:36 2012] Error reading totcts from fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb  6 21:37:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:37 2012] Using photon index=1.80, rate=0.241, arf fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src3.arf
[Mon Feb  6 21:37:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:37 2012] Updating source flux to 3e-12