[Sun Feb  5 10:18:03 2012] Detection parameters:
  Position = (298.0, 347.9) = 0 42 52.44 41 18 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1820.1 +/- 52.1
  Background counts = 25.2
  Rate = 0.1 +/- 0.004

[Sun Feb  5 10:18:06 2012] Off-axis axis estimate = 3.59'
[Sun Feb  5 16:44:16 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 16:44:16 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Sun Feb  5 16:44:16 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.700
[Sun Feb  5 16:44:16 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.22"
[Sun Feb  5 20:11:02 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src6.ximg exists
[Sun Feb  5 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src6.csv
[Sun Feb  5 20:11:02 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Feb  5 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src6.csv
[Sun Feb  5 20:11:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 20:11:03 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Feb  5 20:11:03 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Feb  5 20:11:03 2012] Fit fullrun_mos1_xmm0600660401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Feb  5 23:22:26 2012] Spatial fit model total counts = 1943.810000, observed total counts = 1935.000000
[Sun Feb  5 23:22:26 2012] Offset between fit and detection position for source 13 = 0.233810 pixels
[Sun Feb  5 23:22:26 2012] 1912.367000 total counts/ 699.167000 bgd. counts: snr = 45.881958
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.233810 pixels
  Position = (297.8, 347.9) = 0 42 52.53 41 18 53.4
  Extent = 4.9 (4.8-5.2)", rotation angle = 0
  Source counts = 1213.2 +/- 43.7
  Background counts = 699.2
  Rate = 0.07 +/- 0.003
[Sun Feb  5 23:22:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 23:22:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 23:22:27 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 23:22:27 2012] Source does appear to be extended
[Sun Feb  5 23:22:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 03:58:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 03:58:41 2012] Initial guess for spatial extent in simple fitting = 4.95"
[Mon Feb  6 03:58:41 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.119
[Mon Feb  6 03:58:41 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.95"
[Mon Feb  6 06:20:10 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src6.ximg exists
[Mon Feb  6 06:20:10 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Feb  6 06:20:10 2012] Fit fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_src6 appears to have run properly
[Mon Feb  6 06:20:11 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Feb  6 06:20:11 2012] fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Feb  6 06:20:11 2012] Fit fullrun_mos1_xmm0600660401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Feb  6 08:41:21 2012] Spatial fit model total counts = 1937.560000, observed total counts = 1935.000000
[Mon Feb  6 08:41:21 2012] Offset between fit and detection position for source 13 = 0.003775 pixels
[Mon Feb  6 08:41:21 2012] 1905.586000 total counts/ 693.926000 bgd. counts: snr = 45.996437
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.003775 pixels
  Position = (297.8, 347.9) = 0 42 52.53 41 18 53.3
  Extent = 5.2 (4.9-5.6)" x 4.7 (4.4-5.0)", rotation angle = 356 (328-22) degrees
  Source counts = 1211.7 +/- 43.7
  Background counts = 693.9
  Rate = 0.07 +/- 0.003
[Mon Feb  6 08:41:21 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 08:41:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 08:41:21 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 08:41:21 2012] Source does appear to be extended
[Mon Feb  6 08:41:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Mon Feb  6 16:02:13 2012] Counts = 1211.660000, rescaling region sizes by 2.000000
[Mon Feb  6 16:02:13 2012] XMMSAS src. selection expression = ellipse(25857.484600, 30220.296400, 620.701218, 565.119616, 356.053360, X, Y)
[Mon Feb  6 16:02:13 2012] Writing source region out to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src13_src.reg
[Mon Feb  6 16:02:13 2012] Extracting stamp from image fullrun_mos1_xmm0600660401_pi300-10000_cl_sm2.00.img.gz, (262, 312) - (333, 384)
[Mon Feb  6 16:02:13 2012] XMMSAS bgd. selection expression = annulus(25857.484600, 30220.296400, 2069.004060, 4138.008119, X, Y) && !ellipse(25712.645394, 24788.905398, 1376.896044, 1314.352818, 238.464390, X, Y) && !ellipse(28999.761320, 26806.028200, 417.008812, 417.008812, 0.000000, X, Y) && !ellipse(26788.502600, 25996.619000, 484.126414, 484.126414, 0.000000, X, Y) && !ellipse(27224.048000, 27186.436400, 1165.456034, 1165.456034, 0.000000, X, Y) && !ellipse(25312.134400, 26799.219800, 353.757610, 353.757610, 0.000000, X, Y) && !ellipse(27616.620000, 27015.452000, 697.783220, 697.783220, 0.000000, X, Y) && !ellipse(23459.646624, 26054.856143, 484.789315, 392.903470, 70.807234, X, Y) && !ellipse(24256.435200, 30728.202200, 436.624013, 436.624013, 0.000000, X, Y) && !ellipse(28091.422200, 26513.518200, 571.386416, 363.086410, 90.000000, X, Y) && !ellipse(24205.003400, 26858.188400, 359.198410, 359.198410, 0.000000, X, Y) && !ellipse(26022.436000, 26333.402000, 524.267215, 524.267215, 0.000000, X, Y) && !ellipse(23313.592400, 29235.894800, 403.740812, 403.740812, 0.000000, X, Y) && !ellipse(28332.334778, 26068.125793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.102570, 26756.152740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28649.541748, 30042.293121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26602.971200, 28771.818600, 343.744010, 343.744010, 0.000000, X, Y) && !ellipse(27761.590000, 25625.588000, 1190.016034, 1190.016034, 0.000000, X, Y) && !ellipse(25200.114410, 29722.396606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27373.983368, 27948.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30070.635559, 27094.992889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26645.910614, 29461.401917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.041779, 27855.621613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29770.931200, 31648.644600, 339.131210, 339.131210, 0.000000, X, Y) && !ellipse(24571.191071, 26142.294037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27214.648000, 25442.464000, 1153.704033, 1153.704033, 0.000000, X, Y)
[Mon Feb  6 16:02:13 2012] Writing fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src13.gif
[Mon Feb  6 16:06:01 2012] Mean detx,y = (2414.42, -3335.10) 
[Mon Feb  6 16:06:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 16:06:13 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 16:06:13 2012] Setting source spectrum file to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Feb  6 16:06:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Feb  6 21:37:36 2012] Updating aperture counts using extracted products
[Mon Feb  6 21:37:36 2012] Error reading totcts from fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Feb  6 21:37:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 21:37:37 2012] Using photon index=1.80, rate=0.0717, arf fullrun_mos1_xmm0600660401_pi300-10000_pass1_cl_src13.arf
[Mon Feb  6 21:37:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 21:37:37 2012] Updating source flux to 8.8e-13