[Wed Jan 25 00:59:22 2012] Detection parameters:
  Position = (314.5, 235.9) = 0 42 45.77 41 10 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1995.2 +/- 54.6
  Background counts = 47.4
  Rate = 0.2 +/- 0.005

[Wed Jan 25 00:59:24 2012] Off-axis axis estimate = 4.68'
[Wed Jan 25 01:03:00 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:03:00 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Wed Jan 25 01:03:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988
[Wed Jan 25 01:03:00 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 8.77"
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src63.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src63.csv
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src63.csv
[Wed Jan 25 07:32:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed Jan 25 07:32:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src63.csv
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Jan 25 07:32:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src63.csv
[Wed Jan 25 07:32:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 17:39:20 2012] Spatial fit model total counts = 1614.630000, observed total counts = 2308.000000
[Wed Jan 25 17:39:20 2012] Poor agreement between spatial fit and data for source 67
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jan 25 17:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:20 2012] Assessing source extent using major
[Wed Jan 25 17:39:20 2012] Source does appear to be extended
[Wed Jan 25 17:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:40:17 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 17:40:17 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Wed Jan 25 17:40:17 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988
[Wed Jan 25 17:40:17 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 8.77"
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src63.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src63.csv
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src63_1.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src63.csv
[Thu Jan 26 00:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Thu Jan 26 00:00:21 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Thu Jan 26 08:58:02 2012] Spatial fit model total counts = 2315.730000, observed total counts = 2308.000000
[Thu Jan 26 08:58:02 2012] Offset between fit and detection position for source 67 = 0.063019 pixels
[Thu Jan 26 08:58:02 2012] 2337.687000 total counts/ 947.547000 bgd. counts: snr = 45.160439
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.063019 pixels
  Position = (314.6, 235.9) = 0 42 45.75 41 10 36.8
  Extent = 5.3 (5.0-5.5)", rotation angle = 0
  Source counts = 1390.1 +/- 48.3
  Background counts = 947.5
  Rate = 0.09 +/- 0.003
[Thu Jan 26 08:58:02 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:02 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:02 2012] Source does appear to be extended
[Thu Jan 26 08:58:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 08:58:57 2012] Counts = 1390.140000, rescaling region sizes by 2.000000
[Thu Jan 26 08:58:57 2012] XMMSAS src. selection expression = ellipse(27317.882400, 20473.386500, 630.140418, 630.140418, 0.000000, X, Y)
[Thu Jan 26 08:58:57 2012] Writing source region out to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src67_src.reg
[Thu Jan 26 08:58:57 2012] Extracting stamp from image fullrun_pn_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (278, 200) - (351, 272)
[Thu Jan 26 08:58:57 2012] XMMSAS bgd. selection expression = annulus(27317.882400, 20473.386500, 2100.468060, 4200.936121, X, Y) && !ellipse(25683.490800, 25001.799000, 1420.574441, 1420.574441, 0.000000, X, Y) && !ellipse(27250.590000, 27404.390000, 3511.440101, 3511.440101, 0.000000, X, Y) && !ellipse(27397.400000, 27361.936000, 3793.848109, 3793.848109, 0.000000, X, Y) && !ellipse(28418.766000, 26269.212000, 1754.880050, 1754.880050, 0.000000, X, Y) && !ellipse(28504.946480, 23891.757000, 403.592812, 403.592812, 0.000000, X, Y) && !ellipse(30424.152200, 23631.010800, 484.975214, 427.766412, 326.642300, X, Y) && !ellipse(31316.219600, 22605.695600, 320.188809, 320.188809, 0.000000, X, Y) && !ellipse(27564.970800, 21702.297600, 407.168812, 407.168812, 0.000000, X, Y) && !ellipse(24617.763600, 21040.775400, 435.184813, 435.184813, 0.000000, X, Y) && !ellipse(23445.498474, 20036.269608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.376617, 19761.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31494.282000, 24773.566000, 1393.576040, 1393.576040, 0.000000, X, Y) && !ellipse(29384.990173, 24490.063995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.949768, 24141.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.587433, 23790.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25121.021088, 23540.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24437.670360, 21838.196728, 1302.896037, 394.121077, 112.744678, X, Y) && !ellipse(23894.782532, 20572.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23427.096466, 19363.138702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23115.538000, 18832.816000, 1495.832043, 1495.832043, 0.000000, X, Y) && !ellipse(23086.758600, 18573.544000, 1495.608043, 1495.608043, 0.000000, X, Y) && !ellipse(22839.550000, 17788.384000, 1530.688044, 1530.688044, 0.000000, X, Y) && !ellipse(22593.101318, 17180.456375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22212.844000, 16671.098000, 1651.608048, 1651.608048, 0.000000, X, Y) && !ellipse(21825.706600, 15328.772800, 1790.232052, 465.653613, 111.356000, X, Y)
[Thu Jan 26 08:58:57 2012] Writing fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src67.gif
[Thu Jan 26 10:56:00 2012] Mean detx,y = (2244.79, 6004.10) 
[Thu Jan 26 10:56:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 10:57:00 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 10:57:01 2012] Setting source spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu Jan 26 10:57:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Fri Jan 27 22:51:17 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:17 2012] Error reading totcts from fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri Jan 27 22:51:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:19 2012] Using photon index=1.80, rate=0.0901, arf fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src67.arf
[Fri Jan 27 22:51:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:19 2012] Updating source flux to 2.9e-13
[Fri Jan 27 22:58:42 2012] Flag p found in src. 67 procflags, skipping spectral fitting