[Wed Jan 25 00:59:22 2012] Detection parameters:
  Position = (317.3, 250.0) = 0 42 44.67 41 11 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2087.1 +/- 56.0
  Background counts = 58.1
  Rate = 0.2 +/- 0.005

[Wed Jan 25 00:59:24 2012] Off-axis axis estimate = 3.77'
[Wed Jan 25 01:03:00 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:03:00 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Wed Jan 25 01:03:00 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Wed Jan 25 01:03:00 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 8.31"
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src59.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src59.csv
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src59.csv
[Wed Jan 25 07:32:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Jan 25 07:32:39 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Wed Jan 25 17:39:20 2012] Spatial fit model total counts = 2662.900000, observed total counts = 2661.000000
[Wed Jan 25 17:39:20 2012] Offset between fit and detection position for source 63 = 0.060419 pixels
[Wed Jan 25 17:39:20 2012] 2682.490000 total counts/ 1280.780000 bgd. counts: snr = 39.167054
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.060419 pixels
  Position = (317.4, 250.0) = 0 42 44.65 41 11 38.2
  Extent = 5.1 (4.8-5.3)", rotation angle = 0
  Source counts = 1401.7 +/- 51.8
  Background counts = 1280.8
  Rate = 0.09 +/- 0.003
[Wed Jan 25 17:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:20 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 17:39:20 2012] Source does appear to be extended
[Wed Jan 25 17:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:40:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 17:40:17 2012] Initial guess for spatial extent in simple fitting = 5.09"
[Wed Jan 25 17:40:17 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.076
[Wed Jan 25 17:40:17 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 5.09"
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src59.ximg exists
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu Jan 26 00:00:19 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src59 appears to have run properly
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu Jan 26 00:00:21 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu Jan 26 08:58:02 2012] Spatial fit model total counts = 2662.910000, observed total counts = 2661.000000
[Thu Jan 26 08:58:02 2012] Offset between fit and detection position for source 63 = 0.000000 pixels
[Thu Jan 26 08:58:02 2012] 2682.490000 total counts/ 1280.780000 bgd. counts: snr = 39.167054
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.000000 pixels
  Position = (317.4, 250.0) = 0 42 44.65 41 11 38.2
  Extent = 5.1 (4.8-5.3)", rotation angle = 0
  Source counts = 1401.7 +/- 51.8
  Background counts = 1280.8
  Rate = 0.09 +/- 0.003
[Thu Jan 26 08:58:02 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:02 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:02 2012] Source does appear to be extended
[Thu Jan 26 08:58:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 08:58:57 2012] Counts = 1401.710000, rescaling region sizes by 2.000000
[Thu Jan 26 08:58:57 2012] XMMSAS src. selection expression = ellipse(27564.970800, 21702.297600, 610.753218, 610.753218, 0.000000, X, Y)
[Thu Jan 26 08:58:57 2012] Writing source region out to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src63_src.reg
[Thu Jan 26 08:58:57 2012] Extracting stamp from image fullrun_pn_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (282, 215) - (352, 285)
[Thu Jan 26 08:58:57 2012] XMMSAS bgd. selection expression = annulus(27564.970800, 21702.297600, 2035.844059, 4071.688117, X, Y) && !ellipse(25683.490800, 25001.799000, 1420.574441, 1420.574441, 0.000000, X, Y) && !ellipse(28968.569400, 27018.306600, 1396.507240, 1332.974438, 1.279140, X, Y) && !ellipse(27250.590000, 27404.390000, 3511.440101, 3511.440101, 0.000000, X, Y) && !ellipse(27397.400000, 27361.936000, 3793.848109, 3793.848109, 0.000000, X, Y) && !ellipse(27843.972000, 26861.017000, 1182.832034, 572.047216, 40.086000, X, Y) && !ellipse(27546.257599, 26320.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28418.766000, 26269.212000, 1754.880050, 1754.880050, 0.000000, X, Y) && !ellipse(26960.200000, 26233.433600, 776.868022, 776.868022, 0.000000, X, Y) && !ellipse(28111.911000, 25451.614800, 334.915210, 334.915210, 0.000000, X, Y) && !ellipse(28777.746400, 25109.500000, 379.506411, 379.506411, 0.000000, X, Y) && !ellipse(28504.946480, 23891.757000, 403.592812, 403.592812, 0.000000, X, Y) && !ellipse(30424.152200, 23631.010800, 484.975214, 427.766412, 326.642300, X, Y) && !ellipse(31316.219600, 22605.695600, 320.188809, 320.188809, 0.000000, X, Y) && !ellipse(24617.763600, 21040.775400, 435.184813, 435.184813, 0.000000, X, Y) && !ellipse(27317.882400, 20473.386500, 420.093612, 420.093612, 0.000000, X, Y) && !ellipse(23445.498474, 20036.269608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.376617, 19761.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29933.428955, 25718.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31494.282000, 24773.566000, 1393.576040, 1393.576040, 0.000000, X, Y) && !ellipse(29384.990173, 24490.063995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.949768, 24141.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.587433, 23790.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25121.021088, 23540.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24437.670360, 21838.196728, 1302.896037, 394.121077, 112.744678, X, Y) && !ellipse(23894.782532, 20572.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23427.096466, 19363.138702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23115.538000, 18832.816000, 1495.832043, 1495.832043, 0.000000, X, Y) && !ellipse(23086.758600, 18573.544000, 1495.608043, 1495.608043, 0.000000, X, Y) && !ellipse(22839.550000, 17788.384000, 1530.688044, 1530.688044, 0.000000, X, Y) && !ellipse(22212.844000, 16671.098000, 1651.608048, 1651.608048, 0.000000, X, Y)
[Thu Jan 26 08:58:57 2012] Writing fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src63.gif
[Thu Jan 26 10:51:44 2012] Mean detx,y = (2015.88, 4763.34) 
[Thu Jan 26 10:51:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 10:52:37 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 10:52:38 2012] Setting source spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Jan 26 10:52:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Fri Jan 27 22:51:17 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:17 2012] Error reading totcts from fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jan 27 22:51:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:19 2012] Using photon index=1.80, rate=0.0909, arf fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src63.arf
[Fri Jan 27 22:51:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:19 2012] Updating source flux to 2.8e-13