[Wed Jan 25 00:59:22 2012] Detection parameters:
  Position = (297.6, 305.8) = 0 42 52.29 41 15 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4742.1 +/- 84.3
  Background counts = 88.6
  Rate = 0.4 +/- 0.007

[Wed Jan 25 00:59:24 2012] Off-axis axis estimate = 0.54'
[Wed Jan 25 01:03:00 2012] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:03:00 2012] Initial guess for spatial extent in simple fitting = 6.70"
[Wed Jan 25 01:03:00 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.961
[Wed Jan 25 01:03:00 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 6.70"
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src39.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src39.csv
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src39.csv
[Wed Jan 25 07:32:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Jan 25 07:32:39 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Jan 25 17:39:20 2012] Spatial fit model total counts = 13663.800000, observed total counts = 13654.000000
[Wed Jan 25 17:39:20 2012] Offset between fit and detection position for source 42 = 2.292804 pixels
[Wed Jan 25 17:39:20 2012] Warning, changing simple spatial fit ID from 39 to 34
[Wed Jan 25 17:39:20 2012] 13788.810000 total counts/ 11872.000000 bgd. counts: snr = 17.592077
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 2.292804 pixels
  Position = (299.6, 306.9) = 0 42 51.51 41 15 45.7
  Extent = 10.5 (9.4-12.4)", rotation angle = 0
  Source counts = 1916.8 +/- 117.4
  Background counts = 11872.0
  Rate = 0.1 +/- 0.008
[Wed Jan 25 17:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:20 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 17:39:20 2012] Source does appear to be extended
[Wed Jan 25 17:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:40:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 17:40:17 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Wed Jan 25 17:40:17 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.068
[Wed Jan 25 17:40:17 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 10.45"
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src39.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src39.csv
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src39.csv
[Thu Jan 26 00:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Jan 26 00:00:21 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Jan 26 08:58:02 2012] Spatial fit model total counts = 16828.300000, observed total counts = 13654.000000
[Thu Jan 26 08:58:02 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jan 26 08:58:02 2012] Spatial fit model total counts = 11080.400000, observed total counts = 11079.000000
[Thu Jan 26 08:58:02 2012] Offset between fit and detection position for source 42 = 2.443947 pixels
[Thu Jan 26 08:58:02 2012] 10314.470000 total counts/ 7849.000000 bgd. counts: snr = 27.828677
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 2.443947 pixels
  Position = (297.5, 305.6) = 0 42 52.32 41 15 40.1
  Extent = 4.6 (4.4-4.7)", rotation angle = 0
  Source counts = 2465.5 +/- 101.6
  Background counts = 7849.0
  Rate = 0.2 +/- 0.007
[Thu Jan 26 08:58:02 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:02 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:02 2012] Source does appear to be extended
[Thu Jan 26 08:58:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 08:58:56 2012] Counts = 2465.470000, rescaling region sizes by 2.000000
[Thu Jan 26 08:58:56 2012] XMMSAS src. selection expression = ellipse(25834.788600, 26540.224000, 548.385616, 548.385616, 0.000000, X, Y)
[Thu Jan 26 08:58:56 2012] Writing source region out to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src42_src.reg
[Thu Jan 26 08:58:56 2012] Extracting stamp from image fullrun_pn_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (266, 274) - (329, 337)
[Thu Jan 26 08:58:56 2012] XMMSAS bgd. selection expression = annulus(25834.788600, 26540.224000, 1827.952053, 3655.904105, X, Y) && !ellipse(25683.490800, 25001.799000, 1420.574441, 1420.574441, 0.000000, X, Y) && !ellipse(28968.569400, 27018.306600, 1396.507240, 1332.974438, 1.279140, X, Y) && !ellipse(28607.787000, 30236.463600, 395.525611, 395.525611, 0.000000, X, Y) && !ellipse(24767.580000, 29723.054000, 1309.288038, 1309.288038, 0.000000, X, Y) && !ellipse(26568.139496, 29625.750885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23265.193140, 29433.690400, 379.688011, 379.688011, 0.000000, X, Y) && !ellipse(26530.974800, 28981.120600, 669.084019, 669.084019, 0.000000, X, Y) && !ellipse(27564.833600, 28913.458600, 371.498411, 371.498411, 0.000000, X, Y) && !ellipse(28119.682861, 28227.705383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.852000, 27909.577000, 396.682411, 396.682411, 0.000000, X, Y) && !ellipse(27250.590000, 27404.390000, 3511.440101, 3511.440101, 0.000000, X, Y) && !ellipse(27397.400000, 27361.936000, 3793.848109, 3793.848109, 0.000000, X, Y) && !ellipse(25288.439270, 26963.839752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26592.971985, 27005.653809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24173.289000, 27068.845800, 372.559211, 372.559211, 0.000000, X, Y) && !ellipse(27843.972000, 26861.017000, 1182.832034, 572.047216, 40.086000, X, Y) && !ellipse(27546.257599, 26320.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24532.739200, 26321.154800, 314.665609, 314.665609, 0.000000, X, Y) && !ellipse(28418.766000, 26269.212000, 1754.880050, 1754.880050, 0.000000, X, Y) && !ellipse(26960.200000, 26233.433600, 776.868022, 776.868022, 0.000000, X, Y) && !ellipse(23450.115580, 26250.743600, 430.040812, 430.040812, 0.000000, X, Y) && !ellipse(21751.535355, 25550.490662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28111.911000, 25451.614800, 334.915210, 334.915210, 0.000000, X, Y) && !ellipse(28777.746400, 25109.500000, 379.506411, 379.506411, 0.000000, X, Y) && !ellipse(28504.946480, 23891.757000, 403.592812, 403.592812, 0.000000, X, Y) && !ellipse(22210.030800, 23109.011800, 426.441612, 426.441612, 0.000000, X, Y) && !ellipse(25525.243988, 30550.431213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29485.241425, 28834.196381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25375.741943, 28521.986176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29644.190063, 27948.335236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23273.869415, 27060.942139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29933.428955, 25718.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29384.990173, 24490.063995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.587433, 23790.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25121.021088, 23540.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24437.670360, 21838.196728, 1302.896037, 394.121077, 112.744678, X, Y)
[Thu Jan 26 08:58:56 2012] Writing fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src42.gif
[Thu Jan 26 10:08:27 2012] Mean detx,y = (-1370.54, 918.17) 
[Thu Jan 26 10:08:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 10:09:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 10:09:06 2012] Setting source spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu Jan 26 10:09:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Fri Jan 27 22:51:17 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:17 2012] Error reading totcts from fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Fri Jan 27 22:51:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:18 2012] Using photon index=1.80, rate=0.16, arf fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src42.arf
[Fri Jan 27 22:51:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:19 2012] Updating source flux to 4.7e-13
[Fri Jan 27 22:58:42 2012] Flag p found in src. 42 procflags, skipping spectral fitting