[Wed Jan 25 00:59:21 2012] Detection parameters:
  Position = (317.3, 314.1) = 0 42 44.69 41 16 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5706.6 +/- 103.2
  Background counts = 101.4
  Rate = 0.4 +/- 0.008

[Wed Jan 25 00:59:24 2012] Off-axis axis estimate = 1.77'
[Wed Jan 25 01:03:00 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:03:00 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Jan 25 01:03:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed Jan 25 01:03:00 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.32"
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src33.csv
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src33.csv
[Wed Jan 25 07:32:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jan 25 07:32:39 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Jan 25 17:39:20 2012] Source 35 is offset by -0.847037 and -4.809804 pixels which is larger than
2 X fitted extent = 7.135265 x 1.662372, not incorporating fit results
[Wed Jan 25 17:39:20 2012] Warning, spatial fit 33 centroid is now closest to src. 33
[Wed Jan 25 17:39:20 2012] Source 35 is offset by 3.020802 and 4.805897 pixels which is larger than
2 X fitted extent = 0.781131 x 0.781131, not incorporating fit results
[Wed Jan 25 17:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:20 2012] Assessing source extent using major
[Wed Jan 25 17:39:20 2012] Source does appear to be extended
[Wed Jan 25 17:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:39:20 2012] Source is confused with source 33
[Wed Jan 25 17:40:17 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 17:40:17 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Jan 25 17:40:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed Jan 25 17:40:17 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.32"
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src33.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src33.csv
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src33.csv
[Thu Jan 26 00:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Jan 26 00:00:20 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Jan 26 08:58:02 2012] Source 35 is offset by -0.782321 and -4.809804 pixels which is larger than
2 X fitted extent = 7.135265 x 1.744309, not incorporating fit results
[Thu Jan 26 08:58:02 2012] Source 35 is offset by 6.026296 and -2.838342 pixels which is larger than
2 X fitted extent = 1.714786 x 1.714786, not incorporating fit results
[Thu Jan 26 08:58:02 2012] Spatial fit model total counts = 25704.900000, observed total counts = 25687.000000
[Thu Jan 26 08:58:02 2012] Offset between fit and detection position for source 35 = 2.062561 pixels
[Thu Jan 26 08:58:02 2012] Warning, changing simple spatial fit ID from 33 to 41
[Thu Jan 26 08:58:02 2012] 21002.000000 total counts/ 10500.800000 bgd. counts: snr = 102.477315
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.062561 pixels
  Position = (315.5, 315.1) = 0 42 45.39 41 16 21.2
  Extent = 15.8 (15.2-16.4)", rotation angle = 0
  Source counts = 10501.2 +/- 144.9
  Background counts = 10500.8
  Rate = 0.7 +/- 0.009
[Thu Jan 26 08:58:02 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:02 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:02 2012] Source does appear to be extended
[Thu Jan 26 08:58:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 08:58:55 2012] Counts = 10501.200000, rescaling region sizes by 3.000000
[Thu Jan 26 08:58:55 2012] XMMSAS src. selection expression = ellipse(27397.400000, 27361.936000, 2845.386082, 2845.386082, 0.000000, X, Y)
[Thu Jan 26 08:58:55 2012] Writing source region out to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src35_src.reg
[Thu Jan 26 08:58:55 2012] Extracting stamp from image fullrun_pn_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (152, 152) - (479, 479)
[Thu Jan 26 08:58:55 2012] XMMSAS bgd. selection expression = annulus(27397.400000, 27361.936000, 14226.930409, 28453.860819, X, Y) && !ellipse(25683.490800, 25001.799000, 1420.574441, 1420.574441, 0.000000, X, Y) && !ellipse(28968.569400, 27018.306600, 1396.507240, 1332.974438, 1.279140, X, Y) && !ellipse(23833.902710, 44121.071838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31808.524811, 38779.747620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25210.482300, 38855.336304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.028137, 38166.111938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32172.271600, 36550.780400, 311.291209, 311.291209, 0.000000, X, Y) && !ellipse(23342.597504, 33386.599884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35636.702698, 32720.060089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30967.594600, 13262.612600, 711.763220, 395.457611, 354.145620, X, Y) && !ellipse(29737.538239, 31894.781403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30633.823029, 31298.145874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24219.257900, 30920.919000, 421.970412, 421.970412, 0.000000, X, Y) && !ellipse(31803.066071, 30842.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31247.798553, 13244.173660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.787000, 30236.463600, 395.525611, 395.525611, 0.000000, X, Y) && !ellipse(34701.340400, 30075.108200, 436.325613, 436.325613, 0.000000, X, Y) && !ellipse(24767.580000, 29723.054000, 1309.288038, 1309.288038, 0.000000, X, Y) && !ellipse(17848.824400, 29955.560800, 509.921615, 509.921615, 0.000000, X, Y) && !ellipse(26568.139496, 29625.750885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35901.828000, 29463.828000, 584.004017, 584.004017, 0.000000, X, Y) && !ellipse(34240.231628, 29372.737213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23265.193140, 29433.690400, 379.688011, 379.688011, 0.000000, X, Y) && !ellipse(34938.753906, 29340.170624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.974800, 28981.120600, 669.084019, 669.084019, 0.000000, X, Y) && !ellipse(35525.346000, 29052.970000, 367.327211, 367.327211, 0.000000, X, Y) && !ellipse(27564.833600, 28913.458600, 371.498411, 371.498411, 0.000000, X, Y) && !ellipse(28119.682861, 28227.705383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.852000, 27909.577000, 396.682411, 396.682411, 0.000000, X, Y) && !ellipse(12025.973206, 28220.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30041.146000, 27396.654000, 343.125610, 343.125610, 0.000000, X, Y) && !ellipse(30631.423400, 27381.956600, 425.127212, 425.127212, 0.000000, X, Y) && !ellipse(27250.590000, 27404.390000, 3511.440101, 3511.440101, 0.000000, X, Y) && !ellipse(32836.499054, 26919.856537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.439270, 26963.839752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26592.971985, 27005.653809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24173.289000, 27068.845800, 372.559211, 372.559211, 0.000000, X, Y) && !ellipse(27843.972000, 26861.017000, 1182.832034, 572.047216, 40.086000, X, Y) && !ellipse(27546.257599, 26320.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32500.692000, 26450.028000, 335.914410, 335.914410, 0.000000, X, Y) && !ellipse(25834.788600, 26540.224000, 365.590411, 365.590411, 0.000000, X, Y) && !ellipse(24532.739200, 26321.154800, 314.665609, 314.665609, 0.000000, X, Y) && !ellipse(28418.766000, 26269.212000, 1754.880050, 1754.880050, 0.000000, X, Y) && !ellipse(26960.200000, 26233.433600, 776.868022, 776.868022, 0.000000, X, Y) && !ellipse(23450.115580, 26250.743600, 430.040812, 430.040812, 0.000000, X, Y) && !ellipse(21751.535355, 25550.490662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15719.118904, 25426.455294, 563.054877, 352.973614, 89.240768, X, Y) && !ellipse(28111.911000, 25451.614800, 334.915210, 334.915210, 0.000000, X, Y) && !ellipse(28777.746400, 25109.500000, 379.506411, 379.506411, 0.000000, X, Y) && !ellipse(32468.403000, 24691.939600, 414.037612, 402.941612, 89.664000, X, Y) && !ellipse(33482.719910, 24579.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32621.813800, 24041.004000, 312.214409, 312.214409, 0.000000, X, Y) && !ellipse(16375.537781, 23808.616211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28504.946480, 23891.757000, 403.592812, 403.592812, 0.000000, X, Y) && !ellipse(30424.152200, 23631.010800, 484.975214, 427.766412, 326.642300, X, Y) && !ellipse(21372.896317, 14127.476685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22210.030800, 23109.011800, 426.441612, 426.441612, 0.000000, X, Y) && !ellipse(34249.694153, 22825.320801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31316.219600, 22605.695600, 320.188809, 320.188809, 0.000000, X, Y) && !ellipse(33539.181920, 22624.680800, 501.756014, 430.166412, 300.514400, X, Y) && !ellipse(27564.970800, 21702.297600, 407.168812, 407.168812, 0.000000, X, Y) && !ellipse(35025.761871, 20742.249863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.763600, 21040.775400, 435.184813, 435.184813, 0.000000, X, Y) && !ellipse(16948.684800, 20415.189600, 463.719213, 189.341605, 90.000000, X, Y) && !ellipse(27317.882400, 20473.386500, 420.093612, 420.093612, 0.000000, X, Y) && !ellipse(23445.498474, 20036.269608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.376617, 19761.724976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17519.279266, 17104.422974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20874.980087, 16688.515289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25963.727386, 45105.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34198.728210, 32374.335449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22481.897200, 32136.301600, 420.859212, 420.859212, 0.000000, X, Y) && !ellipse(41880.179321, 30915.327820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.243988, 30550.431213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29485.241425, 28834.196381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34117.312600, 28560.185000, 380.052011, 380.052011, 0.000000, X, Y) && !ellipse(25375.741943, 28521.986176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29644.190063, 27948.335236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23273.869415, 27060.942139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29933.428955, 25718.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39563.276000, 25342.823960, 447.004013, 447.004013, 0.000000, X, Y) && !ellipse(31494.282000, 24773.566000, 1393.576040, 1393.576040, 0.000000, X, Y) && !ellipse(29384.990173, 24490.063995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.949768, 24141.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.587433, 23790.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25121.021088, 23540.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24437.670360, 21838.196728, 1302.896037, 394.121077, 112.744678, X, Y) && !ellipse(23894.782532, 20572.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35827.901978, 20328.164856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23427.096466, 19363.138702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23115.538000, 18832.816000, 1495.832043, 1495.832043, 0.000000, X, Y) && !ellipse(23086.758600, 18573.544000, 1495.608043, 1495.608043, 0.000000, X, Y) && !ellipse(22839.550000, 17788.384000, 1530.688044, 1530.688044, 0.000000, X, Y) && !ellipse(22593.101318, 17180.456375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22212.844000, 16671.098000, 1651.608048, 1651.608048, 0.000000, X, Y) && !ellipse(22216.511963, 16212.380920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22033.957458, 15785.134933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21825.706600, 15328.772800, 1790.232052, 465.653613, 111.356000, X, Y) && !ellipse(21531.975052, 14566.222931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30247.492371, 11886.424866, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 08:58:55 2012] Writing fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src35.gif
[Thu Jan 26 09:43:39 2012] Mean detx,y = (16.73, 272.84) 
[Thu Jan 26 09:43:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:53:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:53:06 2012] Setting source spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jan 26 09:53:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Jan 27 22:51:17 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:17 2012] Error reading totcts from fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jan 27 22:51:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:18 2012] Using photon index=1.80, rate=0.681, arf fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src35.arf
[Fri Jan 27 22:51:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:18 2012] Updating source flux to 1.5e-12
[Fri Jan 27 22:58:42 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Fri Jan 27 22:58:42 2012] Flag c found in src. 35 procflags, skipping spectral fitting