[Wed Jan 25 00:59:21 2012] Detection parameters:
  Position = (353.0, 315.5) = 0 42 30.92 41 16 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3839.2 +/- 73.3
  Background counts = 82.8
  Rate = 0.4 +/- 0.007

[Wed Jan 25 00:59:24 2012] Off-axis axis estimate = 4.14'
[Wed Jan 25 01:03:00 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:03:00 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Wed Jan 25 01:03:00 2012] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.706
[Wed Jan 25 01:03:00 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.50"
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src30.csv
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src30.csv
[Wed Jan 25 07:32:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jan 25 07:32:39 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Jan 25 17:39:20 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 11.408791 pixels away
[Wed Jan 25 17:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:20 2012] Assessing source extent using major
[Wed Jan 25 17:39:20 2012] Source does appear to be extended
[Wed Jan 25 17:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:39:20 2012] Source is confused with source 31
[Wed Jan 25 17:40:17 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 17:40:17 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Wed Jan 25 17:40:17 2012] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.706
[Wed Jan 25 17:40:17 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.50"
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src30.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src30.csv
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src30.csv
[Thu Jan 26 00:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Jan 26 00:00:20 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Jan 26 08:58:02 2012] Spatial fit model total counts = 4773.460000, observed total counts = 4778.000000
[Thu Jan 26 08:58:02 2012] Offset between fit and detection position for source 32 = 0.403470 pixels
[Thu Jan 26 08:58:02 2012] 4467.660000 total counts/ 1586.750000 bgd. counts: snr = 72.322834
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.403470 pixels
  Position = (352.6, 315.3) = 0 42 31.04 41 16 22.1
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 2880.9 +/- 66.8
  Background counts = 1586.8
  Rate = 0.2 +/- 0.004
[Thu Jan 26 08:58:02 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:02 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:02 2012] Source does appear to be extended
[Thu Jan 26 08:58:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 08:58:55 2012] Counts = 2880.910000, rescaling region sizes by 2.000000
[Thu Jan 26 08:58:55 2012] XMMSAS src. selection expression = ellipse(30631.423400, 27381.956600, 637.690818, 637.690818, 0.000000, X, Y)
[Thu Jan 26 08:58:55 2012] Writing source region out to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src32_src.reg
[Thu Jan 26 08:58:55 2012] Extracting stamp from image fullrun_pn_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (316, 279) - (389, 352)
[Thu Jan 26 08:58:55 2012] XMMSAS bgd. selection expression = annulus(30631.423400, 27381.956600, 2125.636061, 4251.272122, X, Y) && !ellipse(25683.490800, 25001.799000, 1420.574441, 1420.574441, 0.000000, X, Y) && !ellipse(28968.569400, 27018.306600, 1396.507240, 1332.974438, 1.279140, X, Y) && !ellipse(29737.538239, 31894.781403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30633.823029, 31298.145874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31803.066071, 30842.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.787000, 30236.463600, 395.525611, 395.525611, 0.000000, X, Y) && !ellipse(34701.340400, 30075.108200, 436.325613, 436.325613, 0.000000, X, Y) && !ellipse(26568.139496, 29625.750885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34240.231628, 29372.737213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34938.753906, 29340.170624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.974800, 28981.120600, 669.084019, 669.084019, 0.000000, X, Y) && !ellipse(27564.833600, 28913.458600, 371.498411, 371.498411, 0.000000, X, Y) && !ellipse(28119.682861, 28227.705383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30041.146000, 27396.654000, 343.125610, 343.125610, 0.000000, X, Y) && !ellipse(27250.590000, 27404.390000, 3511.440101, 3511.440101, 0.000000, X, Y) && !ellipse(32836.499054, 26919.856537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27397.400000, 27361.936000, 3793.848109, 3793.848109, 0.000000, X, Y) && !ellipse(26592.971985, 27005.653809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27843.972000, 26861.017000, 1182.832034, 572.047216, 40.086000, X, Y) && !ellipse(27546.257599, 26320.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32500.692000, 26450.028000, 335.914410, 335.914410, 0.000000, X, Y) && !ellipse(28418.766000, 26269.212000, 1754.880050, 1754.880050, 0.000000, X, Y) && !ellipse(26960.200000, 26233.433600, 776.868022, 776.868022, 0.000000, X, Y) && !ellipse(28111.911000, 25451.614800, 334.915210, 334.915210, 0.000000, X, Y) && !ellipse(28777.746400, 25109.500000, 379.506411, 379.506411, 0.000000, X, Y) && !ellipse(32468.403000, 24691.939600, 414.037612, 402.941612, 89.664000, X, Y) && !ellipse(33482.719910, 24579.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32621.813800, 24041.004000, 312.214409, 312.214409, 0.000000, X, Y) && !ellipse(28504.946480, 23891.757000, 403.592812, 403.592812, 0.000000, X, Y) && !ellipse(30424.152200, 23631.010800, 484.975214, 427.766412, 326.642300, X, Y) && !ellipse(34249.694153, 22825.320801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34198.728210, 32374.335449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.243988, 30550.431213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29485.241425, 28834.196381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34117.312600, 28560.185000, 380.052011, 380.052011, 0.000000, X, Y) && !ellipse(29644.190063, 27948.335236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29933.428955, 25718.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31494.282000, 24773.566000, 1393.576040, 1393.576040, 0.000000, X, Y) && !ellipse(29384.990173, 24490.063995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31999.949768, 24141.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.587433, 23790.591217, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 08:58:55 2012] Writing fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src32.gif
[Thu Jan 26 09:28:15 2012] Mean detx,y = (2716.54, -1630.77) 
[Thu Jan 26 09:28:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:28:57 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:28:57 2012] Setting source spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jan 26 09:28:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Jan 27 22:51:17 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:17 2012] Error reading totcts from fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jan 27 22:51:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:18 2012] Using photon index=1.80, rate=0.187, arf fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src32.arf
[Fri Jan 27 22:51:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:18 2012] Updating source flux to 4.9e-13
[Fri Jan 27 22:58:42 2012] Flag c found in src. 32 procflags, skipping spectral fitting