[Wed Jan 25 00:59:21 2012] Detection parameters:
  Position = (306.3, 333.8) = 0 42 48.93 41 17 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 530.0 +/- 31.7
  Background counts = 91.9
  Rate = 0.05 +/- 0.003

[Wed Jan 25 00:59:24 2012] Off-axis axis estimate = 2.62'
[Wed Jan 25 01:03:00 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:03:00 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Wed Jan 25 01:03:00 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.203
[Wed Jan 25 01:03:00 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.74"
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src23.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src23.csv
[Wed Jan 25 07:32:37 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Jan 25 07:32:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src23.csv
[Wed Jan 25 07:32:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Jan 25 07:32:39 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Jan 25 07:32:39 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Jan 25 17:39:20 2012] Spatial fit model total counts = 1894.220000, observed total counts = 1893.000000
[Wed Jan 25 17:39:20 2012] Offset between fit and detection position for source 25 = 0.781170 pixels
[Wed Jan 25 17:39:20 2012] 1967.282000 total counts/ 1470.810000 bgd. counts: snr = 12.945430
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.781170 pixels
  Position = (305.5, 333.7) = 0 42 49.23 41 17 42.2
  Extent = 8.4 (7.3-9.4)", rotation angle = 0
  Source counts = 496.5 +/- 44.4
  Background counts = 1470.8
  Rate = 0.03 +/- 0.003
[Wed Jan 25 17:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:20 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 17:39:20 2012] Source does appear to be extended
[Wed Jan 25 17:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:39:20 2012] Source is confused with source 20
[Wed Jan 25 17:40:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 17:40:17 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Wed Jan 25 17:40:17 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.065
[Wed Jan 25 17:40:17 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.36"
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src23.csv
[Thu Jan 26 00:00:19 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jan 26 00:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src23.csv
[Thu Jan 26 00:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jan 26 00:00:20 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Jan 26 08:58:02 2012] Warning, spatial fit 23 centroid is now closest to src. 93
[Thu Jan 26 08:58:02 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:02 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:02 2012] Source does appear to be extended
[Thu Jan 26 08:58:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 08:58:55 2012] XMMSAS src. selection expression = ellipse(26530.974800, 28981.120600, 501.813014, 501.813014, 0.000000, X, Y)
[Thu Jan 26 08:58:55 2012] Writing source region out to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src25_src.reg
[Thu Jan 26 08:58:55 2012] Extracting stamp from image fullrun_pn_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (277, 305) - (334, 363)
[Thu Jan 26 08:58:55 2012] XMMSAS bgd. selection expression = annulus(26530.974800, 28981.120600, 836.355024, 1672.710048, X, Y) && !ellipse(28968.569400, 27018.306600, 1396.507240, 1332.974438, 1.279140, X, Y) && !ellipse(24767.580000, 29723.054000, 1309.288038, 1309.288038, 0.000000, X, Y) && !ellipse(26568.139496, 29625.750885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27564.833600, 28913.458600, 371.498411, 371.498411, 0.000000, X, Y) && !ellipse(28119.682861, 28227.705383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.852000, 27909.577000, 396.682411, 396.682411, 0.000000, X, Y) && !ellipse(27250.590000, 27404.390000, 3511.440101, 3511.440101, 0.000000, X, Y) && !ellipse(27397.400000, 27361.936000, 3793.848109, 3793.848109, 0.000000, X, Y) && !ellipse(25288.439270, 26963.839752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26592.971985, 27005.653809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27843.972000, 26861.017000, 1182.832034, 572.047216, 40.086000, X, Y) && !ellipse(28418.766000, 26269.212000, 1754.880050, 1754.880050, 0.000000, X, Y) && !ellipse(25525.243988, 30550.431213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25375.741943, 28521.986176, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 08:58:55 2012] Writing fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src25.gif
[Thu Jan 26 09:24:52 2012] Mean detx,y = (-1590.33, -1614.45) 
[Thu Jan 26 09:24:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:25:09 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:25:09 2012] Setting source spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jan 26 09:25:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jan 27 22:51:17 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:17 2012] Error reading totcts from fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jan 27 22:51:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:18 2012] Using photon index=1.80, rate=0.0322, arf fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src25.arf
[Fri Jan 27 22:51:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:18 2012] Updating source flux to 1e-13
[Fri Jan 27 22:58:42 2012] Flag c found in src. 25 procflags, skipping spectral fitting