[Wed Jan 25 00:59:23 2012] Detection parameters:
  Position = (338.3, 282.1) = 0 42 36.58 41 13 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.4 +/- 19.8
  Background counts = 91.3
  Rate = 0.01 +/- 0.002

[Wed Jan 25 00:59:24 2012] Off-axis axis estimate = 3.13'
[Wed Jan 25 01:03:00 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 01:03:00 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Wed Jan 25 01:03:00 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Wed Jan 25 01:03:00 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 7.99"
[Wed Jan 25 07:32:38 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src99.ximg exists
[Wed Jan 25 07:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src99.csv
[Wed Jan 25 07:32:38 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src99_1.ximg exists
[Wed Jan 25 07:32:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src99.csv
[Wed Jan 25 07:32:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 07:32:40 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Wed Jan 25 07:32:40 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Wed Jan 25 07:32:40 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Wed Jan 25 17:39:20 2012] Source 106 is offset by -3.833055 and 1.201494 pixels which is larger than
2 X fitted extent = 0.981370 x 2.841214, not incorporating fit results
[Wed Jan 25 17:39:20 2012] Warning, spatial fit 99 centroid is now closest to src. 103
[Wed Jan 25 17:39:20 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:20 2012] Assessing source extent using major
[Wed Jan 25 17:39:20 2012] Source does appear to be extended
[Wed Jan 25 17:39:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:40:17 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 17:40:17 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Wed Jan 25 17:40:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Wed Jan 25 17:40:17 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 7.99"
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src79.ximg exists
[Thu Jan 26 00:00:20 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src79_1.ximg exists
[Thu Jan 26 00:00:20 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_src79 appears to have run properly
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Thu Jan 26 00:00:21 2012] fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Thu Jan 26 00:00:21 2012] Fit fullrun_pn_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Thu Jan 26 08:58:02 2012] Source 106 is offset by 6.814807 and -6.802667 pixels which is larger than
2 X fitted extent = 1.623559 x 1.623559, not incorporating fit results
[Thu Jan 26 08:58:02 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:02 2012] Assessing source extent using major
[Thu Jan 26 08:58:02 2012] Source does appear to be extended
[Thu Jan 26 08:58:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 08:58:57 2012] XMMSAS src. selection expression = ellipse(29384.990173, 24490.063995, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan 26 08:58:57 2012] Writing source region out to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src106_src.reg
[Thu Jan 26 08:58:57 2012] Extracting stamp from image fullrun_pn_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (301, 245) - (376, 320)
[Thu Jan 26 08:58:57 2012] XMMSAS bgd. selection expression = annulus(29384.990173, 24490.063995, 1087.500000, 2175.000000, X, Y) && !ellipse(28968.569400, 27018.306600, 1396.507240, 1332.974438, 1.279140, X, Y) && !ellipse(27250.590000, 27404.390000, 3511.440101, 3511.440101, 0.000000, X, Y) && !ellipse(27397.400000, 27361.936000, 3793.848109, 3793.848109, 0.000000, X, Y) && !ellipse(26592.971985, 27005.653809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27843.972000, 26861.017000, 1182.832034, 572.047216, 40.086000, X, Y) && !ellipse(27546.257599, 26320.969543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28418.766000, 26269.212000, 1754.880050, 1754.880050, 0.000000, X, Y) && !ellipse(26960.200000, 26233.433600, 776.868022, 776.868022, 0.000000, X, Y) && !ellipse(28111.911000, 25451.614800, 334.915210, 334.915210, 0.000000, X, Y) && !ellipse(28777.746400, 25109.500000, 379.506411, 379.506411, 0.000000, X, Y) && !ellipse(28504.946480, 23891.757000, 403.592812, 403.592812, 0.000000, X, Y) && !ellipse(30424.152200, 23631.010800, 484.975214, 427.766412, 326.642300, X, Y) && !ellipse(31316.219600, 22605.695600, 320.188809, 320.188809, 0.000000, X, Y) && !ellipse(29933.428955, 25718.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31494.282000, 24773.566000, 1393.576040, 1393.576040, 0.000000, X, Y) && !ellipse(31999.949768, 24141.737427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.587433, 23790.591217, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 08:58:57 2012] Writing fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src106.gif
[Thu Jan 26 11:33:42 2012] Mean detx,y = (2564.75, 1493.17) 
[Thu Jan 26 11:33:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 11:34:19 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 11:34:20 2012] Setting source spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Thu Jan 26 11:34:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Fri Jan 27 17:06:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan 27 17:06:41 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:17 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:17 2012] Error reading totcts from fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Fri Jan 27 22:51:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:19 2012] Using photon index=1.80, rate=0.00986, arf fullrun_pn_xmm0600660301_pi300-10000_pass1_cl_src106.arf
[Fri Jan 27 22:51:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:19 2012] Updating source flux to 2.5e-14
[Fri Jan 27 22:58:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting