[Wed Jan 25 01:00:38 2012] Detection parameters:
  Position = (305.1, 281.9) = 0 42 49.40 41 14 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.6 +/- 16.4
  Background counts = 35.8
  Rate = 0.004 +/- 0.001

[Wed Jan 25 01:00:38 2012] Off-axis axis estimate = 1.29'
[Wed Jan 25 11:47:39 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 11:47:39 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Wed Jan 25 11:47:39 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.663
[Wed Jan 25 11:47:39 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 7.08"
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src75.ximg exists
[Wed Jan 25 17:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src75.csv
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src75_1.ximg exists
[Wed Jan 25 17:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src75.csv
[Wed Jan 25 17:38:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 17:38:57 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Wed Jan 25 17:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src75.csv
[Wed Jan 25 17:38:57 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Wed Jan 25 17:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src75.csv
[Wed Jan 25 17:38:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 17:39:55 2012] Warning, spatial fit 75 centroid is now closest to src. 90
[Wed Jan 25 17:39:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:55 2012] Assessing source extent using major
[Wed Jan 25 17:39:55 2012] Source does appear to be extended
[Wed Jan 25 17:39:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:39:55 2012] Source is confused with source 88
[Thu Jan 26 03:36:25 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 03:36:25 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Thu Jan 26 03:36:25 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.663
[Thu Jan 26 03:36:25 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 7.08"
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src71.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src71.csv
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src71_1.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src71.csv
[Thu Jan 26 08:57:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Thu Jan 26 08:57:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src71.csv
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Thu Jan 26 08:57:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src71.csv
[Thu Jan 26 08:57:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:58:31 2012] Source 85 is offset by 6.579662 and -6.338094 pixels which is larger than
2 X fitted extent = 3.213504 x 3.213504, not incorporating fit results
[Thu Jan 26 08:58:31 2012] Source 85 is offset by 7.797487 and 0.002343 pixels which is larger than
2 X fitted extent = 4.097939 x 4.874789, not incorporating fit results
[Thu Jan 26 08:58:31 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:31 2012] Assessing source extent using major
[Thu Jan 26 08:58:31 2012] Source does appear to be extended
[Thu Jan 26 08:58:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 19:37:33 2012] XMMSAS src. selection expression = ellipse(26492.906586, 24474.741821, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 19:37:33 2012] Writing source region out to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src85_src.reg
[Fri Jan 27 19:37:33 2012] Extracting stamp from image fullrun_mos2_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (268, 244) - (343, 319)
[Fri Jan 27 19:37:33 2012] XMMSAS bgd. selection expression = annulus(26492.906586, 24474.741821, 1087.500000, 2175.000000, X, Y) && !ellipse(25674.518000, 25001.414000, 1451.469642, 1303.250438, 31.306200, X, Y) && !ellipse(28962.299880, 27015.438494, 433.240544, 392.025338, 29.586211, X, Y) && !ellipse(26737.124480, 26197.104400, 435.968813, 435.968813, 0.000000, X, Y) && !ellipse(25275.696800, 27010.101400, 382.920011, 382.920011, 0.000000, X, Y) && !ellipse(28310.950000, 26460.580000, 1350.968039, 1350.968039, 0.000000, X, Y) && !ellipse(26018.866000, 26581.696000, 797.313623, 797.313623, 0.000000, X, Y) && !ellipse(26567.194305, 26935.558380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.895844, 25458.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27465.296000, 25909.770000, 1108.536032, 1108.536032, 0.000000, X, Y) && !ellipse(28747.706754, 25114.124400, 258.146407, 258.146407, 0.000000, X, Y) && !ellipse(28491.547360, 23877.694400, 345.404810, 345.404810, 0.000000, X, Y) && !ellipse(27529.542284, 24674.691600, 286.191208, 286.191208, 0.000000, X, Y) && !ellipse(24535.215424, 26331.833923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26916.590851, 25254.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26002.952789, 23263.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.700836, 23872.036896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23888.484802, 24430.838257, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 19:37:33 2012] Writing fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src85.gif
[Fri Jan 27 20:07:58 2012] Mean detx,y = (363.94, -2713.32) 
[Fri Jan 27 20:07:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 20:08:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 20:08:08 2012] Setting source spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Jan 27 20:08:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Fri Jan 27 22:50:27 2012] Not generating rmf since there are only 65 counts
[Fri Jan 27 22:50:27 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:23 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:23 2012] Error reading totcts from fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Jan 27 22:51:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:24 2012] Using photon index=1.80, rate=0.00432, arf fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src85.arf
[Fri Jan 27 22:51:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:24 2012] Updating source flux to 4.2e-14
[Fri Jan 27 22:54:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting